• No results found

Drill Pipe Float Valves

N/A
N/A
Protected

Academic year: 2021

Share "Drill Pipe Float Valves"

Copied!
45
0
0

Loading.... (view fulltext now)

Full text

(1)
(2)
(3)

Baker SPD

DRILL PIPE FLOAT VALVES INTRODUCTION

Baker SPD is known as the leading manufacturer of Drill Pipe Float Valves in the industry. Committed to con-tinuous improvement and production of quality products for optimum performance and reliability, the Drill Pipe Float Valves have become an industry standard due to their superior engineering, quality, construction, and de-pendability in service.

Baker SPD manufactures a complete line of float valves, repair kits, and puller assemblies to accommodate a wide range of drilling situations and operating conditions, including H2S and steam service. These Drill Pipe

Float Valves provide added blowout protection at the bottom of the drillstring, prevent flowback when joints are added, and keep cuttings out of the drillpipe to prevent bit plugging while making connections.

Note: It is recommended that multiple Drill Pipe Float Valves run in the same string be separated.

QUALITY CONSTRUCTION

Baker SPD Drill Pipe Float Valves have been designed, manufactured, tested, and certified in accordance with accepted engineering, manufacturing, and quality assurance standards including, but not limited to, the follow-ing documents or publications:

American Iron and Steel Institute (AISI) American National Standards Institute (ANSI) American Society for Testing and Materials (ASTM) American Society for Metals (ASM)

American Welding Society (AWS)

Rubber Manufacturer’s Association (RMA) Society of Automotive Engineers (SAE)

TEST PRESSURE RATINGS

Model F Drill Pipe Float Valves rated 7,500 WP. Model G Drill Pipe Float Valves rated 7,500 WP.

CAGES

Cage construction of the various Models F and G includes ductile iron and low carbon steel on the 6F size only. Hardness levels of these materials are at or below 22 Rockwell C to resist hydrogen sulfide stress cracking when used for H2S applications.

Stainless Steel available upon request. Alloy Steel available in Model F only.

SPRINGS

Models F and G utilize tempered “spring steel” springs for normal operating conditions or high alloy springs for H2S and steam applications.

SEAL AND SHOCK ABSORBERS

Standard H2S Steam;

Temperature Rating 250°F 450°F 500°F

Description Buna-N Viton® EPDM

Product Family No. H48013 thru H48019 H48030 thru H48033 H48020 thru H48026 ;For steam applications only where no hydrocarbons are present.

INTRODUCTION

D RI L L P IPE F LO AT V A L VES

(4)

Baker SPD

BAKER SPD MODEL F VALVES

BENEFITS AND FEATURES

A fast-acting plunger valve opens when the kelly is pulled out of the hole, then closes, eliminating breakage of a wet joint. The plunger type valve also prevents flowback when adding joints and keeps cuttings out of the drill pipe, preventing bit plugging while making connections. The likelihood of having to pull a wet string with its attendant safety hazards and expensive down time is eliminated.

CONSTRUCTED FOR LONG LIFE

Models F and FC Drill Pipe Float Valves are made of low carbon steel suitable for most applications including H2S conditions. It is designed and constructed with minimum number of parts-all highly resistant to wear to give

long trouble-free service.

EASILY SERVICED

Normally, the only service required is replacement of the valve seal. This can be accomplished in seconds with-out special tools. The valve guide at the lower end of the valve stem is simply raised, compressing the spring and allowing for removal of the entire inner portion of the valve. Baker SPD Drill Pipe Float Valves are easily installed by simply lubricating the side seals and sliding them into the cavity in the float sub or drilled out drill collar. Care must be taken in positioning the float valve in the drilling string. If it is placed too far from the top of the hole and the pipe is not filled while running in, hydrostatic pressure could cause damage to the drill pipe or the float valve. If the pipe is filled while running in, the float valve can be placed just above the bit, if desired.

BAKER SPD NOW OFFERS TWO NEW DRILL PIPE FLOAT VALVE CONFIGURATIONS

The Model FA offers all the standard features of the Model F Float Valve with the added feature of a port which allows a fluid path through the center of the valve. This feature allows for an automatic partial filling of the drill pipe during run in. This valve is used when monitoring the bit head for gas pressure and/or gas pockets, allowing measurement of differential pressure when required. The Model FA is available in all sizes.

The Model FI also offers all the standard features of the Model F Float Valve with the added feature of an integral baffle plate at the top of the float valve. For operations where a baffle plate is always used for instrumentation or fluid control the integral baffle plate configuration offers and economical option. The Model FI is only available in sizes 4R and 5F-6R.

MODEL F DRILL PIPE FLOAT VALVES

(5)

Baker SPD

MODEL F PLUNGER TYPE VALVE

Product Family Nos. H48013 and H48043 (Heavy Duty)

The Model F Plunger Type Valve provides positive and instantaneous shut off against high or low pressure, assuring continuous control of fluid flow during drilling. For normal drilling operations, the durable Model F is the most economical choice and is available in all sizes.

The “Heavy Duty” Model F Drill Pipe Float Valve is designed with a high alloy steel body that increases the lift of the Drill Pipe Float Valve. It provides high impact resis-tance and is dimensionally identical to the standard Baker Drill Pipe Float Valve, allowing interchangeability of the trim. This type of Drill Pipe Float Valve is recommended for use with downhole mud motors.

Note: Not recommended for Air Drilling.

Diagram Key for

Model F Plunger Type Valve

1. Valve Seal Disc 5. Guide 2. Plunger/Valve 6. Spring 3. Side Seal 7. Cage 4. Valve Seal

Model F Plunger Type Valve

Product Family No. H48013 7 3 6 5 4 1 2

MODEL FC AUTOMATIC FILL VALVE

Product Family No. H48018

The Model FC Automatic Fill Valve is ideal to use when drilling deep wells. The automatic feature on the Model FC allows the drillpipe to fill from the bottom, thereby removing the mess, hazards, and lost time from filling. When running in the hole, the automatic fill feature eliminates the “ram effect” preventing the downhole pressure surges that can cause formation damage. The Model FC is slotted on the stem to accept a low carbon “automatic fill” key assembly that is automatically released by fluid circulation releasing the plunger for complete closure.

Note: Not recommended for Air Drilling.

Diagram Key for

Model FC Automatic Fill Valve

1. Guide 5. Valve Seal 2. Cage 6. Valve Seal Disk 3. Side Seal 7. Spring

4. Plunger/Valve 8. Key

l

Model FC Automatic Fill Valve

Product Family No. H48018 2 3 4 5 6 7 1 8

MODEL F DRILL PIPE FLOAT VALVES

D RI L L P IPE F LO AT V A L VES

(6)

Baker SPD

BAKER SPD MODEL G VALVES

BENEFITS AND FEATURES

Flapper Valves for G Models are made of normalized, carburized, quenched, and tempered alloy steel to resist wear and erosion. The flapper valve opens fully during circulation providing an unrestricted bore through the valve thereby effectively prolonging the life of the valve and drill collar as there is no diversion of fluid against the drill collar ID.

CONSTRUCTED FOR LONG LIFE

Dampeners have been provided at the three most common points of wear due to vibration. The shock absorber has been placed at the bottom of the valve cage to prevent valve to bit wear. The flapper valve is provided with a resilient bumper to prevent wear between it and the valve cage or drill collar ID. The hinge pin is coated to protect against wear from vibration. Like all Baker SPD Drill Pipe Float Valves, G Models are designed for long life, fast installation, (no tools are required), and trouble free operation.

EASILY SERVICED

Particular attention should be given to the hinge pin, spring, and rubber parts. Since the seal is not in the fluid flow pattern it receives little wear and seldom is replaced. When replacing the seal, the handle of the float valve puller may be used to remove the seal retainer, and after installation of a new seal, used to reinstall the seal retainer. To remove, insert the handle of the float valve puller into the upper end until the beveled edge of the handle seats on the beveled edge of the seal retainer. The seal retainer can then be knocked out. In this in-stance, the seal retainer should also be replaced.

Note: Caution should be used to prevent the valve face from being damaged.

(7)

Baker SPD

MODEL G FULL OPEN VALVE

(FLAPPER TYPE)

Product Family No. H48015

The Model G “Flapper Type” Full Open Valve incorpo-rates a specially designed flapper which opens quickly and fully to provide a completely unrestricted bore through the valve. The Model G is especially good for use with highly abrasive fluids. When circulation stops, the flapper closes instantly to prevent cuttings from entering the drill string and plugging the bit. The valve opens when the first joint is raised out of the hole assuring the first joints drain and are not pulled wet. This saves mud and avoids safety hazards and down time. The flapper-type valve comple-ments primary blowout prevention equipment to provide complete internal pressure control.

Diagram Key for Model G

Full Open Valve (Flapper Type)

1. Small Bumper 6. Seal Retainer 2. Spring 7. Flapper Valve

3. Pin 8. Seal

4. Large Bumper 9. Side Seal

5. Shock Absorber 10. Cage Model G Full Open Valve (Flapper Type)

Product Family No. H48015 10 9 8 1 2 3 4 7 6 5

MODEL GA DIFFERENTIAL

PRESSURE MONITORING VALVE

Product Family No. H48016

The Model GA Differential Pressure Monitoring Valve is identical to the Model G except for a hardened 1/4 in. diameter tungsten carbide orifice bean insert in the flap-per to provide automatic partial filling of the drillpipe dur-ing runndur-ing in. This valve is used when monitordur-ing the bit head for gas pressure and/or gas pockets, allowing mea-surement of differential pressure when required.

Diagram Key for Model GA

Differential Pressure Monitoring Valve

1. Small Bumper 7. Carbide Bean 2. Spring 8. Seal Retainer

3. Pin 9. Seal

4. Large Bumper 10. Side Seal 5. Flapper Valve 11. Cage 6. Shock Absorber

Model GA Differential Pressure Monitoring Valve

Product Family No. H48016 11 10 1 2 3 4 5 9 8 7 6

MODEL G AND GA DRILL PIPE FLOAT VALVE

D RI L L P IPE F LO AT V A L VES

(8)

Baker SPD

Model GC Automatic Fill Flapper Valve

Product Family No. H48019 11 10 9 8 7 1 2 3 4 5 6

MODEL GC AUTOMATIC FILL

FLAPPER VALVE

Product Family No. H48019

The Model GC Automatic Fill Flapper Valve uses a low carbon steel “automatic fill” key assembly that allows the pipe to fill from the bottom, reducing run in time by elimi-nating the need to fill the string from the top. When run-ning in the hole, the automatic fill feature eliminates the “ram effect” preventing the downhole pressure surges that can cause formation damage. The valve can be run in ei-ther the closed position or the automatic fill position. The fast acting flapper valve opens when the kelly is pulled out of the hole reducing the possibility of pulling a wet string along with the associated safety hazards. Mud spill-over on the rig floor is also eliminated. These timesaving fea-tures allow the Model GC to quickly pay for itself.

Diagram Key for

Model GC Automatic Fill Flapper Valve

1. Small Bumper 7. Shock Absorber 2. Seal Retainer 8. Key

3. Seal 9. Flapper Valve

4. Pin 10. Side Seal

5. Spring 11. Cage

6. Large Bumper

Model GCA Automatic Fill with Differential Pressure Monitoring Valve

Product Family No. H48019 11 12 9 8 7 10 1 2 4 5 6 3

MODEL GCA AUTOMATIC FILL

WITH DIFFERENTIAL PRESSURE

MONITORING VALVE

Product Family No. H48019

The Model GCA Automatic Fill with Differential Pressure Monitoring Valve incorporates the benefits of the Models GC and GA, allowing automatic partial filling of the drill-pipe from the bottom, eliminating the need to fill the string from the top when running in the hole and measuring dif-ferential pressures when required.

Diagram Key for Model GCA Automatic Fill

with Differential Pressure Monitoring Valve

1. Small Bumper 7. Shock Absorber 2. Seal Retainer 8. Key

3. Seal 9. Carbide Bean

4. Pin 10. Side Seal

5. Spring 11. Cage

6. Large Bumper 12. Flapper Valve

(9)

Baker SPD

MODEL GB AIR DRILLING VALVE

Product Family No. H48017

The Model GB Air Drilling Valve is designed for air drilling only. It is identical to the Model G except the spring has been removed and the beveled design of the guide greatly reduces the danger of hanging up on the float valve when retrieving tools below it.

Special Installation

The Drill Pipe Float Valve is installed near the top of the drillstring. Escaping air is channeled under the flapper valve, forcing it closed, and preventing loss of pressure.

Note: In order to lose as little air as possible from the

drill-string when a joint is made up, it is recommended that the float valve be moved up in the drillstring each time a new bit is installed. Caution must be exercised, however, to keep the valve at least one joint below the kelly; other-wise, the valve could be blown out of the drillpipe by trapped pressure when the kelly is removed.

Diagram Key for Model GB Air Drilling Valve

1. Cage 5. Pin

2. Side Seal 6. Flapper Valve 3. Seal Retainer 7. Shock Absorber

4. Seal 8. Location of Bevel Guide

Model GB Air Drilling Valve

Product Family No. H48017 1 2 3 5 6 7 4 8

MODEL GBA AIR DRILLING WITH

DIFFERENTIAL PRESSURE

MONITORING VALVE

Product Family No. H48017

The Model GBA Air Drilling Valve with Differential Pres-sure Monitoring Valve incorporates the benefits of the Models GB and GA. The bevel design of the guide reduc-es the danger of hanging up on the float valve when re-trieving tools. The 1/4 in. diameter tungsten carbide orifice bean insert in the flapper allows monitoring of differential pressure.

Diagram Key for Model GBA Air Drilling With

Differential Pressure Monitoring Valve

1. Cage 6. Carbide Bean 2. Seal Retainer 7. Shock Absorber

3. Seal 8. Location of Bevel Guide

4. Pin 9. Side Seal

5. Flapper Valve

Model GBA Air Drilling With Differential Pressure Monitoring Valve

Product Family No. H48017 7 1 2 4 5 6 9 3 8

MODEL GB AND GBA DRILL PIPE FLOAT VALVES

D RI L L P IPE F LO AT V A L VES

(10)

Baker SPD

MODELS GS AND GAS DRILL PIPE

FLOAT VALVES

Product Family Nos. H48058 and H48059 (Model GS); H48056 and H48057 (Model GAS)

Baker SPD now offers two new designs in its Drill Pipe Float Valve product line. The Model GS and GAS Drill Pipe Float Valves offer optimum performance and reliability for jobs that require high flow and erosion resistance. Made of alloy steel tempered for H2S applications, the GS and GAS feature a unique flapper relief to reduce flapper spring and pin wear. The Model GS is provided with a non ported flapper and the Model GAS has a ported flapper.

Model GS and GAS are available in four Drill Pipe Float Valve standard configurations as noted in the table below. There are also three non standard configuration; 3.38 x 2, 4F Short, and 4.8 x 2.94. The nonstandard sizes offer maximized flow areas with a compact length for drill motor applications.

The Model GS and GAS valves are machined to strict tolerances with a large ID to provide high flow rates and flapper valve relief in the cage to minimize fluid wear and streamline flow.

• Option: Tungsten carbide coating on flapper face for Model GS and Model GAS

• Machined to strict tolerances to allow O-ring seal (Model GAS only)

• Machined to strict tolerances to allow for standard seals (Model GS only)

• Eliminates wear on Bit Sub, Hinge Pins, and Flapper • Reduced flow restrictions

Diagram Key for Model GAS

1. Cage 6. Carbide Bean (GAS Only) 2. Seal Retaining Ring 7. Spring

3. Seal 8. Back-up Spiral Ring 4. Pin 9. O-ring

5. Flapper Valve

MODELS GS AND GAS DRILL PIPE FLOAT VALVES

DIMENSIONAL DATA

Model GS, GAS Valve Size Model GS, GAS ID of Valve D Diameter of Valve R (D + 1/32) Diameter of Recess for Valve

L Length of Valve 3.38 x 2 2.00 3.365 3.397 6.00 3-1/2 IF 1.69 3.125 3.156 10.00 4R 2.00 3.469 3.500 8.31 4F Short 2.25 3.656 3.688 7.75 5R 2.69 3.875 3.907 9.75 4.8 x 2.94 2.94 4.805 4.813 7.0 5F6R 2.98 4.781 4.813 11.75

Models GS and GAS Drill Pipe Float Valves

Product Family Nos. H48058, H48059, H48056, and H48057

MODELS GS AND GAS DRILL PIPE FLOAT VALVES

Model GAS Mud Motor Drill Pipe Float Valve

Product Family Nos. H48056 and H48057 8 9 7 4 5 6 3 1 2

(11)

Baker SPD

H

2

S SERVICE

FEATURES AND BENEFITS

The H2S service valve is made of AISI 1018/1020 Steel. Cages are made of ASTM A-395 Ductile Iron, and springs are made of UNS #N07750 (High Alloy). Elastomers provide protection up to 450°F. All elastomers are made of Viton® which performs well where H2S and hydrocarbons are present.

MODEL F DRILL PIPE FLOAT VALVE

Product Family Nos. H48030 (Model F) and H48032 (Model FC)

The Model F Drill Pipe Float Valve for H2S service, provides instantaneous shut-off against high or low pressure,

assuring control of the fluid flow through the drilling string at all times during the drilling operation whether the kelly is in place or not.

MODEL G DRILL PIPE FLOAT VALVE

Product Family Nos. H48031 (Model G) and H48033 (Model GC)

The Model G Drill Pipe Float Valve for H2S service, provides instantaneous shut-off against either liquid or gas preventing entry of cuttings into the drillpipe when circulating is discontinued.

STEAM SERVICE

FEATURES AND BENEFITS

The Steam service valve is made of AISI 1018/1020 Steel. Cages are made of ASTM A-395 Ductile Iron, and springs are made of UNS #N07750 (High Alloy). Elastomers provide protection up to 500°F. All elastomers are made of EPDM which performs well in steam where hydrocarbons are not present.

MODEL F DRILL PIPE FLOAT VALVE

Product Family No. H48020

The Model F Drill Pipe Float Valve for steam service provides instantaneous shut-off against high or low pres-sure, assuring control of the fluid flow through the drillstring at all times during the drilling operation - whether the kelly is in place or not.

MODEL G DRILL PIPE FLOAT VALVE

Product Family Nos. H48021 (Model G) and H48023 (Models GB and GBA)

The Model G Drill Pipe Float Valve for steam service provides instantaneous shut-off against either liquid or gas preventing entry of cuttings into the drillpipe when circulating is discontinued.

FLOAT VALVE INSTALLATION

Baker SPD Drill Pipe Float Valves are easily installed by simply lubricating the side seals and sliding them into the cavity in the float sub or drilled-out drill collar. Installed in the float sub, the valve may be positioned between tool joints or by inverting the float sub between the bit and drill collar. Care must be taken in positioning the float valve in the drillstring. If it is placed too far from the top of the hole and the pipe is not filled while running in, hydrostatic pressure can cause damage to the drillpipe or the float valve. If the pipe is filled while running in, the float valve can be placed just above the bit.

SPECIAL INSTRUCTIONS FOR MODEL GB DRILL PIPE FLOAT VALVE

Install the Model GB Drill Pipe Float Valve near the top of the drillstring where escaping air is channeled under the flapper valve, forcing it closed and preventing loss of pressure.

H

2

S/STEAM SERVICE VALVES

D RI L L P IPE F LO AT V A L VES

(12)

Baker SPD

REPAIR KITS

Specially packaged repair kits are available for all Baker SPD Drill Pipe Float Valves as follows:

METAL KIT for Model F Drill Pipe Float

Valves contain:

1. Three [3] Valve Springs 2. One [1] Valve Guide 3. One [1] Valve Seal Disk 4. One [1] Valve

(Three Redressings)

Note: Also available for single redressing.

1

2

3

4

RUBBER KIT for Model F Drill Pipe Float

Valves contain:

1. Eight [8] Side Seals 2. Two [2] Valve Seals

(Four Redressings)

Note: Also available for single redressing.

1 2

REPAIR KITS FOR ALL STYLES OF MODEL F DRILL PIPE FLOAT VALVES

REPAIR KITS FOR ALL STYLES OF MODEL G DRILL PIPE FLOAT VALVES

METAL KIT for Model G Drill Pipe Float

Valves contain:

1. One [1] Seal Retaining Ring 2. Three [3] Hinge Pins

3. Three [3] Spring Assemblies 4. One [1] Flapper Valve

(Three Redressings)

Note: Also available for single redressing.

1

2

3 4

RUBBER KIT for Model G Drill Pipe Float

Valves contain:

1. Eight [8] Side Seals

2. One [1] Seal Retaining Ring 3. One [1] Shock Absorber 4. Two [2] Valve Seals

(Four Redressings)

Note: Also available for single redressing.

2

1

3 4

(13)

Baker SPD

VALVE PULLERS FOR ALL STYLES OF

MODEL F DRILL PIPE FLOAT VALVES

Product Family No. H48091

The valve puller consists of a finger sub that is stabbed into the bottom end of the Drill Pipe Float Valve cage and engages the web by right-hand rotation.

Caution: When pulling a Model FC, the release key on the Drill Pipe Float Valves must

be positioned such that the finger sub does not contact the key prior to engaging the web of the cage. This will prevent damage to the key during valve removal.

Diagram Key for Valve Puller for All Styles of

Model F Drill Pipe Float Valves

1. Handle 2. Stop 3. Stem 4. Hammer 5. Finger Sub

TOOLS

Valve Puller for F Models

Product Family No. H48091 2

1

3

4

5

VALVE PULLERS FOR ALL STYLES OF

MODEL G DRILL PIPE FLOAT VALVES

Product Family No. H48090

The valve puller consists of a fork that engages the cage of the Drill Pipe Float Valve. The driver is then forcefully pulled upward to quickly and easily remove the valve from the cav-ity in the float sub or drill collar.

Diagram Key for Valve Puller for All Styles of

Model G Drill Pipe Float Valves

1. Driver 2. Fork

BAFFLE PLATES

Product Family No. WVT791

Baker SPD Baffle Plates are installed on top of the Drill Pipe Float Valve as a landing tool for recorders, thus preventing the recorder from enter-ing the drillpipe float valve and possibly the drill bit.

Valve Puller for G Models

Product Family No. H48090 1

2

Baffle Plates

Product Family No. WVT791

TOOLS

D RI L L P IPE F LO AT V A L VES

(14)

Baker SPD

DIMENSIONAL INFORMATION FOR ALL STYLES OF

MODEL F AND G DRILL PIPE FLOAT VALVES

L

D

L

D

A = L (Length of Valve Assembly) + Length of Tool Joint Pin + 1/4 in.)

A ±1/16" 3 ±1/16" T+ 1/32" -0 R+ 1/64" -0

RECUTTING BODY OR BORING OUT DRILL COLLARS

Models F and G Drill Pipe Float Valves are identical in outside dimensions and use the same float sub or bored-out drill collar. Float subs are made in lengths from 14 in. to 30 in. depending on size and type, and designed for two recuts, two on either end or one on each end. Each time the tool joint box is recut, however, the shoulder of the lower end of the body bore must be cut back to maintain dimension “A”. The body bore length permits approximately 1/4 in. travel of the valve, and this travel should be maintained when the body is recut. Bodies longer than the standard 3 ft in length allow more recuts and can be furnished on special order.

MODELS F AND G DRILL PIPE FLOAT VALVE

DIMENSIONAL DATA

Valve Size D Diameter of Valve R (D + 1/32) Diameter of Recess for Valve L Length of Valve T; Diameter of Recess for Baffle Plate ID of Valve Model F Model G 1R 1-21/32 1-11/16 5-7/8 1-5/16 1 N/A 1F-2R 1-29/32 1-15/16 6-1/4 1-1/2 1-1/4 1 2F-3R 2-13/32 2-7/16 6-1/2 1-29/32 1-9/16 1-1/4 3F 2-13/16 2-27/32 10 2-7/16 1-7/8 1-5/8 3-1/2 IF 3-1/8 3-5/32 2-11/16 4R 3-15/32 3-1/2 8-5/16 2-15/16 2-5/16 1-31/32 4F 3-21/32 3-11/16 12 3-1/4 2-1/2 2-3/16 5R 3-7/8 3-29/32 9-3/4 3-3/8 2-3/4 2-1/4 5F-6R 4-25/32 4-13/16 11-3/4 4-9/32 3-1/4 2-7/8 6F 5-11/16 5-23/32 14-5/8 5-3/16 4-1/8 N/A

;Disregard if this diameter is the same or smaller than standard tool joint ID.

Note: The Dimensional Information Chart is not for Models GS and GAS Drill Pipe Float Valves.

N/A = Non-Applicable.

(15)

Baker SPD

BIT SUB INFORMATION

Valve Size

Threads Tool Joint

Type

STD/OD Face-to-Shoulder or Face-to-Face

in. in. in.

1R 2-3/8 API Regular 3-1/8 18 1F-2R 2-7/8 3-3/4 20 2F-3R 3-1/2 4-1/4 4R 4-1/2 5-1/2 24 5R 5-1/2 6-3/4 28 5F-6R 6-5/8 7-3/4 30 5F-6R 7-5/8 8-7/8 6F 8-5/8 10 3F 3-1/2

API Full Hole

4-5/8 24 3-1/2 IF 4 5-1/4 4F 4-1/2 5-3/4 28 5F-6R 5-1/2 7 30 6F 6-5/8 8 1F-2R 2-3/8 API IF 3-3/8 18

2F-3R 2-7/8 API IF Box x Pin 4-1/8 20

3-1/2 IF 3-1/2 API IF 4-3/4 24 4F 4 5-3/4 28 5R 4-1/2 6-3/8 5F-6R 5-1/2 7-3/8 30 6F 6-5/8 8-3/4

Note: Box and/or pin specification required.

Note: The box and/or pin connections on Drill Pipe Float Subs should not be mated with old tool joints. In addition, the sub should not be made up in the top of a drill collar unless the box on the drill collar has been machined beforehand and new joints placed on the drill collar to mate with the upper box connection in the Drill Pipe Float Sub.

Note: Other sizes are provided upon request.

BIT SUB INFORMATION

D RI L L P IPE F LO AT V A L VES

(16)

Baker SPD

SPECIFICATION GUIDE

Tool Joint Types Sizes (in.)

1R 1F-2R 2F-3R 3F 3-1/2 IF 4R 4F 5R 5F-6R 6F API Regular 2-3/8 2-7/8 3-1/2 4-1/2 5-1/2 5-9/16; 6-5/8 7-5/8O 8-5/8 Hughes or

Reed Acme Regular 2-3/8 2-7/8 3-1/2 4-1/2

5-1/2 5-9/16 6-5/8 Union Tool 2-3/8 2-7/8 3-1/2 4-1/2 5-1/2 5-9/16; 6-5/8O Hughes or Reed Double Streamline 2-7/8 2-3/8 3-1/2 4 4-1/2 5 5-1/2 5-9/16;

API Full Hole 2-3/8 2-7/8 3-1/2 4 4-1/2 4-1/2; 6-5/8; Reed Acme Full Hole 3-1/2; 4-1/2; 5-1/2 5-9/16; Hughes Acme Streamline 2-3/8 2-7/8 3-1/2; 4-1/2; 5-1/2 5-9/16; Hughes Xtra Hole 2-7/8 3-1/2 4-1/2 5 5-1/2

5-9/16; Reed Semi-Internal Flush 2-7/8 3-1/2 4-1/2 5

API Internal Flush 2-3/8 2-7/8 3-1/2 4 4-1/2 Hydril Type “IF”

(Internal Flush Ext Upset) 2-3/8; 2-7/8; 3-1/2; 4-1/2; 5 Hydril “EIU”

(External Internal Upset) 3-1/2 4 4-1/2

5-1/2 5-9/16; 6-5/8 Hydril Type “F” (External Flush) 2-7/8 3-1/2; 4-1/2 5 5-1/2 5-9/16 6-5/8 Hughes Ext

Flush Acme Type 3-1/2 4-1/2

5-1/2

5-9/16 6-5/8 Hughes Ext

Flush Full Hole Type 4-1/2

Shaded areas indicate sizes available in Models G, GA, GC, GCA, GB, and GBA. Model F available in all sizes. Model FC available in all sizes, except 1R and 1F-2R.

; Float sub in these sizes has smaller ID than standard tool joint.

O Interchangeable.

BIT AND SHANK SIZES

Bit and Shank Sizes Bit Size (in.) 3-1/4 3-3/8 4-1/2 4-3/4 5-1/2 6 6-1/8 6-1/4 6-1/2 6-3/4 7-7/8 8-1/4 8-1/2 8-3/4 9-1/2 9-3/4 10-1/2 11 12-1/4 13-1/2 20 24 25 Std API Pin Shank Size (in.) 2-3/8 2-3/8 2-3/8 2-7/8 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 4-1/2 4-1/2 4-1/2 4-1/2 6-5/8 6-5/8 6-5/8 6-5/8 6-5/8 6-5/8 7-5/8 7-5/8 7-5/8

SPECIFICATION GUIDE

(17)

Baker SPD

ORDERING INFORMATION (MATERIAL NUMBERS AND WEIGHTS)

Standard Service Drill Pipe Float Valves, Repair Kits, and Puller Assemblies

MODEL F PLUNGER TYPE VALVE

PRODUCT FAMILY NOS. H48013 (STANDARD STYLE) AND

H48043 (HEAVY DUTY ALLOY STYLE)

Size Assembly Wt Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb lb 1R 480131200 1.5 N/A N/A 016012200 0.5 015929800 1.0 480911200 6.0 1F-2R 480131422 1.5 N/A N/A 016012300 0.7 016011300 2.0 480911200 6.0 2F-3R 480132432 2.5 480432432 2.5 016012400 0.8 016011400 2.0 480912432 8.0 3F 480133400 5.0 N/A N/A 016012500 1.0 016011500 2.0 480913400 10.0 3-1/2 IF 480133600 5.0 480433600 5.0 016012600 1.0 016011500 2.0 480913400 10.0 4R 480134200 7.0 480434200 7.0 016012700 1.0 016011700 2.0 480914200 12.0 4F 480134400 9.5 480434400 9.5 016012800 1.0 016011800 3.0 480914400 13.0 5R 480135200 9.5 480435200 9.5 016012900 1.0 016011900 4.0 480915200 15.0 5F-6R 480135462 16.0 480435462 16.0 016013000 1.1 016012000 5.0 480915462 19.0 6F 480136400 28.0 N/A N/A 016013100 2.0 016012100 5.0 480916400 21.0 N/A = Not Available.

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL FA - (PLUNGER TYPE VALVE)

PRODUCT FAMILY NO. H48012

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480122432 2.5 016012405 0.8 016011405 2.0 480912432 6.0 3F 480123400 5.0 016012505 1.0 016011505 2.0 480913400 6.0 3 1/2 IF 480123600 5.0 016012605 1.0 016011505 2.0 480913400 6.0 4R 480124200 7.0 016012705 1.0 016011705 2.0 480914200 6.0 5F-6R 480125462 16.0 016013005 1.1 016012005 5.0 480915462 6.0

MODEL FC AUTOMATIC FILL VALVE (PLUNGER TYPE)

PRODUCT FAMILY NO. H48018

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480182432 2.5 016012400 0.8 070017100 2.0 480912432 8.0 3F 480183400 5.0 016012500 1.0 070017300 2.0 480913400 10.0 3-1/2 IF 480183600 5.0 016012600 1.0 070017300 2.0 480913400 10.0 4R 480184200 7.0 016012700 1.0 070017400 2.0 480914200 12.0 4F 480184400 9.5 016012800 1.0 070017500 3.0 480914400 13.0 5R 480185200 9.5 016012900 1.0 070017600 4.0 480915200 15.0 5F-6R 480185462 16.0 016013000 1.1 070017700 5.0 480915462 19.0 6F 480186400 28.0 016013100 2.0 070017800 5.0 480916400 21.0

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL FI - (PLUNGER TYPE VALVE) WITH INTEGRAL BAFFLE PLATE,

PRODUCT FAMILY NO. H48014

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 4R 480144200 9.0 016012700 1.0 016011700 2.0 480914200 6.0 5F-6R 480145462 18.0 016013000 1.1 016012000 5.0 480915462 6.0

ORDERING INFORMATION

D RI L L P IPE F LO AT V A L VES

(18)

Baker SPD

ORDERING INFORMATION (MATERIAL NUMBERS AND WEIGHTS)

Standard Service Drill Pipe Float Valves, Repair Kits, and Puller Assemblies

MODEL G FULL OPEN VALVE (FLAPPER TYPE)

PRODUCT FAMILY NO. H48015

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1F-2R 480151422 2.0 051988300 0.5 051988400 0.7 480901422 7.0 2F-3R 480152432 3.5 016013800 0.6 016013200 0.8 480902432 8.0 3F 480153400 5.0 016013900 1.0 016013300 1.0 480903400 10.0 3-1/2 IF 480153600 5.0 051982000 1.0 052070200 1.0 480903400 10.0 4R 480154200 7.0 016014000 1.5 016013400 1.1 480904200 12.0 4F 480154400 8.0 016014100 1.6 016013500 1.4 480904400 13.0 5R 480155200 9.0 016014200 1.6 016013600 1.6 480905200 15.0 5F-6R 480155462 12.0 016014300 2.0 016013700 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL GA DIFFERENTIAL PRESSURE MONITORING VALVE (PORTED FLAPPER TYPE)

PRODUCT FAMILY NO. H48016

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1F-2R 480161422 2.0 051988300 0.5 052070800 0.7 480901422 7.0 2F-3R 480162432 3.5 016013800 0.6 017135000 0.8 480902432 8.0 3F 480163400 5.0 016013900 1.0 017136700 1.0 480903400 10.0 3-1/2 IF 480163600 5.0 051982000 1.0 052075500 1.0 480903400 10.0 4R 480164200 7.0 016014000 1.5 017116000 1.1 480904200 12.0 4F 480164400 8.0 016014100 1.6 017136800 1.4 480904400 13.0 5R 480165200 9.0 016014200 1.6 017136900 1.6 480905200 15.0 5F-6R 480165462 12.0 016014300 2.0 017134200 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL GC AUTOMATIC FILL VALVE (FLAPPER TYPE)

PRODUCT FAMILY NO. H48019

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480192432 3.5 016013800 0.6 016013200 0.8 480902432 8.0 3F 480193400 5.0 016013900 1.0 016013300 1.0 480903400 10.0 3-1/2 IF 480193600 5.0 051982000 1.0 052070200 1.0 480903400 10.0 4R 480194200 7.0 016014000 1.5 016013400 1.1 480904200 12.0 4F 480194400 8.0 016014100 1.6 016013500 1.4 480904400 13.0 5R 480195200 9.0 016014200 1.6 016013600 1.6 480905200 15.0 5F-6R 480195462 12.0 016014300 2.0 016013700 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

(19)

Baker SPD

ORDERING INFORMATION (MATERIAL NUMBERS AND WEIGHTS)

Standard Service Drill Pipe Float Valves, Repair Kits, and Puller Assemblies

MODEL GCA - AUTOMATIC FILL WITH DIFFERENTIAL

PRESSURE MONITORING VALVE (PORTED FLAPPER TYPE)

PRODUCT FAMILY NO. H48019

Incorporates the Benefits of the Automatic Fill Feature into Model GA.

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480192433 3.5 016013800 0.6 017135000 .8 480902432 8.0 3F 480193401 5.0 016013900 1.0 017136700 1.0 480903400 10.0 3-1/2 IF 480193601 5.0 051982000 1.0 052075500 1.0 480903400 10.0 4R 480194201 7.0 016014000 1.5 017116000 1.1 480904200 12.0 4F 480194401 8.0 016014100 1.6 017136800 1.4 480904400 13.0 5R 480195201 9.0 016014200 1.6 017136900 1.6 480905200 15.0 5F-6R 480195463 12.0 016014300 2.0 017134200 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL GB AIR DRILLING VALVE (FLAPPER TYPE)

PRODUCT FAMILY NO. H48017

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1F-2R 480171422 2.0 051988300 0.5 O/A O/A 480901422 7.0 2F-3R 480172432 3.5 016013800 0.6 022216100 0.8 480902432 8.0 3F 480173400 5.0 016013900 1.0 022216200 1.0 480903400 10.0 3-1/2 IF 480173600 5.0 051982000 1.0 022216200 1.0 480903400 10.0 4R 480174200 7.0 016014000 1.5 022216300 1.1 480904200 12.0 4F 480174400 8.0 016014100 1.6 022216400 1.4 480904400 13.0 5R 480175200 9.0 016014200 1.6 022216500 1.6 480905200 15.0 5F-6R 480175462 12.0 016014300 2.0 022216600 1.8 480905462 19.0 O/A = On Application.

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL GBA AIR DRILLING WITH DIFFERENTIAL

PRESSURE MONITORING VALVE (PORTED FLAPPER TYPE)

PRODUCT FAMILY NO. H48017

Incorporates the Benefits of Differential Pressure Monitoring Feature into the Model GB.

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480172433 3.5 016013800 0.6 017135000 0.8 480902432 8.0 3F 480173401 5.0 016013900 1.0 017136700 1.0 480903400 10.0 3-1/2 IF 480173601 5.0 051982000 1.0 052075500 1.0 480903400 10.0 4R 480174201 7.0 016014000 1.5 017116000 1.1 480904200 12.0 4F 480174401 8.0 016014100 1.6 017136800 1.4 480904400 13.0 5R 480175201 9.0 016014200 1.6 017136900 1.6 480905200 15.0 5F-6R 480175463 12.0 016014300 2.0 017134200 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

ORDERING INFORMATION

D RI L L P IPE F LO AT V A L VES

(20)

Baker SPD

ORDERING INFORMATION (MATERIAL NUMBERS AND WEIGHTS)

H

2

S Service Drill Pipe Float Valves, Repair Kits, and Puller Assemblies

H

2

S Service Repair Kits and Puller Assemblies

MODEL F - (PLUNGER TYPE)

PRODUCT FAMILY NO. H48030

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1R 480301200 1.5 071081701 .5 071084901 1.0 480911200 6.0 1F-2R 480301422 1.5 071081801 .7 071085001 2.0 480911200 7.0 2F-3R 480302432 2.5 071081901 .8 071085101 2.0 480912432 8.0 3F 480303400 5.0 071082001 1.0 071085201 2.0 480913400 10.0 3-1/2 IF 480303600 5.0 071082101 1.0 071085301 2.0 480913400 10.0 4R 480304200 7.0 071082201 1.0 071085401 2.0 480914200 12.0 4F 480304400 9.5 071082301 1.0 071085501 3.0 480914400 13.0 5R 480305200 9.5 071082401 1.0 071085601 4.0 480915200 15.0 5F-6R 480305462 16.0 071082501 1.1 071085701 5.0 480915462 19.0 6F 480306400 28.0 071082601 2.0 071085801 5.0 480916400 21.0

Note: All kits above are for three and four redressing. For single redressing change last two digits of material number to 10

MODEL FA - (PLUNGER TYPE VALVE) FOR H

2

S SERVICE

PRODUCT FAMILY NO. H48035

Size Assembly Part No. Wt Rubber Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480352432 2.5 071081905 0.8 071085105 2.0 480912432 6.0 3F 480353400 5.0 071082005 1.0 071085205 2.0 480913400 6.0 3 1/2 IF 480353600 5.0 071082105 1.0 071085305 2.0 480913400 6.0 4R 480354200 7.0 071082205 1.0 071085405 2.0 480914200 6.0 5F-6R 480355462 16.0 071082505 1.1 071085705 5.0 480915462 6.0

MODEL G - (FLAPPER TYPE)

PRODUCT FAMILY NO. H48031

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1F-2R 480311422 2.0 051997200 .5 051997300 .7 480901422 7.0 2F-3R 480312432 3.5 071082701 .6 071085901 .8 480902432 8.0 3F 480313400 5.0 071082801 1.0 071086001 1.0 480903400 10.0 3-1/2 IF 480313600 5.0 052125001 1.0 052125101 2.0 480903400 10.0 4R 480314200 7.0 071082901 1.5 071086101 1.1 480904200 12.0 4F 480314400 8.0 071083001 1.6 071086201 1.4 480904400 13.0 5R 480315200 9.0 071083101 1.6 071086301 1.6 480905200 15.0 5F-6R 480315462 12.0 071083201 2.0 071086401 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing change last two digits of material number to 10

(21)

Baker SPD

ORDERING INFORMATION (MATERIAL NUMBERS AND WEIGHTS)

H

2

S Service Repair Kits and Puller Assemblies (Continued)

MODEL GC - AUTOMATIC FILL (FLAPPER TYPE)

PRODUCT FAMILY NO. H48033

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F-3R 480332432 3.5 071082701 0.6 071085901 0.8 480902432 8.0 3F 480333400 5.0 071082801 1.0 071086001 1.0 480903400 10.0 4R 480334200 7.0 071082901 1.5 071086101 1.1 480904200 12.0 4F 480334400 8.0 071083001 1.6 071086201 1.4 480904400 13.0 5R 480335200 9.0 071083101 1.6 071086301 1.6 480905200 15.0 5F-6R 480335462 12.0 071083201 2.0 071086401 1.8 480905462 19.0

Note: All kits above are for three and four redressing. For single redressing change last two digits of material number to 10

MODEL GA - AUTOMATIC FILL WITH DIFFERENTIAL

PRESSURE MONITORING (PORTED FLAPPER TYPE)

PRODUCT FAMILY NO. H48026

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1F2R 480261422 2.0 O/A - O/A - 480901422 7.0 2F3R 480262432 3.5 O/A - O/A - 480902432 8.0 3F 480263400 5.0 O/A - O/A - 480903400 10.0 4R 480264200 7.0 O/A - O/A - 480903400 10.0 4F 480264400 8.0 O/A - O/A - 480904200 12.0 5R 480265200 9.0 O/A - O/A - 480905200 15.0 5F6R 480265462 12.0 O/A - O/A - 480905462 19.0 O/A = On Application.

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL GB - AIR DRILLING (FLAPPER TYPE)

PRODUCT FAMILY NO. H48034

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 2F3R 480342432 3.5 O/A - 051998400 0.8 480902432 8.0 4R 480344200 7.0 O/A - 051999500 1.1 480904200 12.0 O/A = On Application.

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

ORDERING INFORMATION FOR H

2

S SERVICE

D RI L L P IPE F LO AT V A L VES

(22)

Baker SPD

ORDERING INFORMATION (MATERIAL NUMBERS AND WEIGHTS)

Steam Service

MODEL F - (PLUNGER TYPE), PRODUCT FAMILY NO. H48020

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1R 480201200 1.5 070502400 0.5 015929800 1.0 480911200 6.0 1F-2R 480201422 1.5 070502500 0.7 016011300 2.0 480911200 7.0 2F-3R 480202432 2.5 070502600 0.8 016011400 2.0 480912432 8.0 3F 480203400 5.0 070502700 1.0 016011500 2.0 480913400 10.0 3-1/2 IF 480203600 5.0 070502800 1.0 016011500 2.0 480913400 10.0 4R 480204200 7.0 070502900 1.0 016011700 2.0 480914200 12.0 4F 480204400 9.5 070503000 1.0 016011800 3.0 480914400 13.0 5R 480205200 9.5 070503100 1.0 016011900 4.0 480915200 15.0 5F-6R 480205462 16.0 070503200 1.1 016012000 5.0 480915462 19.0 6F 480206400 28.0 070503300 2.0 016012100 5.0 480916400 21.0 Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10

MODEL G - (FLAPPER TYPE), PRODUCT FAMILY NO. H48021

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 1F-2R 480211422 2.0 O/A - O/A - 480901200 7.0 2F-3R 480212432 3.5 070305600 0.6 016013200 0.8 480902432 8.0 3F 480213400 5.0 070305700 1.0 016013300 1.0 480903400 10.0 3-1/2 IF 480213600 5.0 052075600 1.0 O/A 2.0 480903600 10.0 4R 480214200 7.0 070305800 1.5 016013400 1.1 480904200 12.0 4F 480214400 8.0 070305900 1.6 016013500 1.4 480904400 13.0 5R 480215200 9.0 070306000 1.6 016013600 1.6 480905200 15.0 5F-6R 480215462 12.0 070306100 2.0 016013700 1.8 480905462 19.0 O/A = On Application.

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10

MODEL GB - AIR DRILLING (FLAPPER TYPE), PRODUCT FAMILY NO. H48023

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 5R 480235200 9.0 070306000 1.6 022216500 1.6 480905200 15.0 Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10.

MODEL GC - AUTOMATIC FILL (FLAPPER TYPE), PRODUCT FAMILY NO. H48024

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 4R 480244200 7.0 O/A - O/A - 480904200 12.0 O/A = On Application.

Note: All kits above are for three and four redressing. For single redressing, change last two digits of material number to 10

MODEL GCA - AUTOMATIC FILL WITH DIFFERENTIAL

PRESSURE MONITORING (PORTED FLAPPER TYPE)

PRODUCT FAMILY NO. H48025

Incorporates the Benefits of the Automatic Fill Feature into Model GA.

Size Assembly Wt Rubber

Repair Kit Wt Metal Repair Kit Wt Puller Assembly Wt lb lb lb lb 4R 480254200 7.0 O/A - O/A - 480904200 12.0 5F6R 480255462 12.0 O/A - O/A - 480905462 19.0 O/A = On Application.

(23)

1.0 0.7 1.3 0.7 0.6 1.0 0.7 0.7 Ring Spider Spider Ring 4F

4”APIInternalFlush

WVT791744 2-7/8”APIInternalFlush 2F-3R

WVT791743 4-1/2”APIInternalFlush 5R

WVT791742 3-1/2”APIInternalFlush 3-1/2 IF WVT791741 2-7/8”APIInternalFlush 2F-3R WVT791740 3-1/2”APIInternalFlush 3-1/2 IF WVT791725

6F 6-5/8”APIFullHole

WVT791724

5F-6R 5-9/16”APIFullHole

5F-6R 6-5/8”APIRegular WVT791723 5R 5-9/16”APIRegular WVT791726 WVT791722

(24)
(25)
(26)

Baker SPD

Drill Pipe Float Valve

Repair Manual

Table of Contents

Contents Page

Scope...1

Reference...1

Disassembly...2

Model F...2

Model G...4

Inspection...7

Preparation...7

Model F...7

Visual...7

Dimensional...7

Model G...7

Visual...7

Dimensional...8

Reassembly & Inspection...9

Model F...9

Model G...12

Packaging...16

Appendix...17

Model F (Dimensional Data)...18

(27)

Baker SPD Repair Manual

Drill Pipe Float Valve

Scope

The Baker SPD Repair Manual outlines the disassembly, inspection,

reassembles, painting and packaging for the Model F and Model G Series

Drill Pipe Float Valves (DPFV).

Reference

The Baker SPD Catalog provides all commodity (part) number information

for ordering spare parts. Any questions regarding the Repair Manual or

Catalog should be addressed to Baker SPD Customer Service Department.

(28)

Baker SPD Repair Manual

Drill Pipe Float Valve

Disassembly

Model F Series:

Tools Required:

1-Flat Head Screwdriver

1-Vise (Optional)

Disassembly Procedure:

Side Seals:

Secure the cage with a vise or by hand as shown in the figures. Insert

a flat head screwdriver in between the seal groove and side seal. (Fig.

1) Pry the side seal up until the tip of screwdriver can be pushed out

to the edge of the DPFV. (Fig. 2) Next, pry the side seal off of the

DPFV. (Fig. 3)

Figure 3

(29)

Baker SPD Repair Manual

Drill Pipe Float Valve

Insert a flat head screwdriver in between the seal groove and side

seal. (Fig. 4) Pry the side seal up until the tip of screwdriver can be

pushed out to the edge of the DPFV. Next, using a twisting motion

pry the side seal off of the DPFV. (Fig. 5)

Valve and Components:

Stand cage with grooves for side seals in the downward position.

Depress the valve guide until the guide is no longer held in by the

cage. (Note: Always maintain pressure on the guide.) (Fig. 6) Rotate

the valve stem out through the cage slot until the guide and spring can

be removed. (Fig. 7) Slowly remove pressure on the guide until

spring is no longer compressed. Remove guide, spring and valve

from cage. Remove valve seal and disc from valve.

Caution: Compressed spring can be dangerous.

Figure 4 Figure 5

Figure 7 Figure 6

(30)

Baker SPD Repair Manual

Drill Pipe Float Valve

Model G Series:

Tools Required:

1-Flat Head Screwdriver

1-Puller Tool

1-Pliers

1-Vise (Optional)

Disassembly Procedure:

Side Seals:

Secure the cage with a vise or by hand as shown in the figures. Insert

a flat head screwdriver in between the seal groove and side seal. (Fig.

8) Pry the side seal up until the tip of screwdriver can be pushed out

to the edge of the DPFV. (Fig. 9) Next, pry the side seal off of the

DPFV. (Fig. 10)

Insert a flat head screwdriver in between the seal groove and side

seal. (Fig. 11) Pry the side seal up until the tip of screwdriver can be

pushed out to the edge of the DPFV. Next, using a twisting motion

pry the side seal off of the DPFV. (Fig. 12)

Figure 9

(31)

Baker SPD Repair Manual

Drill Pipe Float Valve

Flapper Components:

Remove flapper retaining pin with a pair of pliers. (Fig. 13 & 14)

Remove spring and flapper.

Seal and Retaining Ring:

Stand cage with grooves for side seals in the upward position. Insert

the puller tool through the middle of the DPFV until tool seats against

the ring. (Fig. 15) Holding puller centered, slide “hammer” up and

forcefully slide downward. (Fig. 16) Repeat until retaining ring

dislodges. (Fig. 17)

Figure 11 Figure 12

(32)

Baker SPD Repair Manual

Drill Pipe Float Valve

Shock Absorber:

Stand cage with shock absorber in the upward position. Insert flat

head screwdriver in between top of the cage and shock absorber. (Fig.

18) Pry shock absorber upward until it becomes dislodged from the

DPFV cage. (Fig. 19)

Figure 15 Figure 16 Figure 17

(33)

Baker SPD Repair Manual

Drill Pipe Float Valve

Inspection

Preparation:

All metal components shall be shot or sand blast for a appropriate

amount of time to remove all corrosion build up.

All rubber material and Model G springs shall be discarded.

Model F Series:

Visual Inspection:

Visually check each component for excessive wear.

Acceptance of visual examination is as follows:

1) Cage shall not be washed out on any of the sealing areas.

2) Valve shall not be washed out.

3) Valve stem shall not be loosely attached to valve head. Any

movement of the stem relative to the valve head shall be grounds

for rejection and subsequent replacement of valve.

Dimensional Inspection:

Dimensions shown in the appendix on page 18 shall be considered

acceptable criteria for inspection. Any deviations from the

dimensions shown shall be cause for replacement.

Model G Series:

Visual Inspection:

Visually check each component for excessive wear. Acceptance of

visual examination is as follows:

(34)

Baker SPD Repair Manual

Drill Pipe Float Valve

1) Cage shall not be washed out on any of the sealing areas or hinge

pin area.

2) Flapper shall not be washed out or have evidence of pitting on

sealing surfaces.

Dimensional Inspection:

Dimensions shown in the appendix on page 19 shall be considered

acceptable criteria for inspection. Any deviations from the

dimensions shown shall be cause for replacement.

(35)

Baker SPD Repair Manual

Drill Pipe Float Valve

Reassembly

Model F Series:

Tools Required:

1-Flat Head Screwdriver

1-Hammer

1-Vise (Optional)

Hydraulic Oil

Assembly Procedure:

Side Seals:

Stand cage with grooves for side seals in the upward position. Place

a small amount of oil on the inside diameter of both side seals. (Fig.

20) Place one edge of seal (flat side up) into the top seal groove and

hold with thumb. (Fig. 21) Insert screwdriver horizontally between

groove and seal on either side of the cage. (Fig. 22) Rotate

Figure 20

Figure 22 Figure 23

(36)

Baker SPD Repair Manual

Drill Pipe Float Valve

screwdriver around cage until the seal seats in top groove. (Do not

remove screwdriver) Manipulate screwdriver until one edge of

screwdriver is seated in the lower seal groove. (Fig. 23) Rotate

screwdriver until seal seats into lower groove. Place one edge of seal

(flat side down) into the top seal groove. (Fig. 24) Insert screwdriver

horizontally between groove and seal on either side of the cage. (Fig.

25) Rotate screwdriver around cage until the seal seats in top groove.

Valve Components:

Place valve seal on valve sub-assembly. (Flat side facing valve) (Fig.

26) Place valve disk on valve. (Flat side facing valve) (Fig. 27) Hold

valve cone side down and place spring on valve sub-assembly.

Figure 25 Figure 24

(37)

Baker SPD Repair Manual

Drill Pipe Float Valve

(Fig. 28) Place guide bevel side down on top of spring. (Fig. 29)

Holding sub-assembly together, place valve sub-assembly into slot

side of cage. Depress the guide until the stem can be rotated into the

slot. (Do not release guide)

(Fig.30) Rotate valve sub-assembly into cage until stem is through

the slot. (Fig. 31) Release guide and insure that guide shoulder seats

on cage.

Inspection:

(Fig. 32) Review assembly to assure valve moves freely in cage and

properly seals. Assure valve retaining mechanism properly fits and

functions on all model ‘FC’ DPFV.

Figure 28 Figure 29

(38)

Baker SPD Repair Manual

Drill Pipe Float Valve

Model G Series:

Tools Required:

1-Flat Head Screwdriver

1-Puller Tool

1-Hammer

1-Vise (Optional)

Hydraulic Oil

Assembly Procedure:

Side Seals:

Stand cage with grooves for side seals in the upward position. Place

a small amount of oil on the inside diameter of both side seals. (Fig.

33) Place one edge of seal (flat side up) into the top seal groove and

hold with thumb. (Fig. 34) Insert screwdriver horizontally between

groove and seal on either side of the cage. (Fig. 35) Rotate

Figure 33

Figure 35 Figure 36

(39)

Baker SPD Repair Manual

Drill Pipe Float Valve

screwdriver around cage until the seal seats in top groove. (Do not

remove screwdriver) Manipulate screwdriver until one edge of

screwdriver is seated in the lower seal groove. (Fig. 36) Rotate

screwdriver until seal seats into lower groove. Place one edge of seal

(flat side down) into the top seal groove. (Fig. 37) Insert screwdriver

horizontally between groove and seal on either side of the cage. (Fig.

38) Rotate screwdriver around cage until the seal seats in top groove.

Seal and Retaining Ring:

Stand cage with grooves for side seals in the downward position.

Prior to installing groove, visually inspect groove to assure that no

debris is present. If there is debris present, thoroughly clean groove.

Place seal into seal groove. (Fig. 39) Place retaining ring into ID of

seal. (Fig. 40) Insert the puller tool through the middle of the DPFV

until tool seats into ring. (Fig. 41)

Figure 38 Figure 37

(40)

Baker SPD Repair Manual

Drill Pipe Float Valve

Holding the puller tool in the center of the cage, slide “hammer” up

and forcefully slide downward. (Fig. 42) Repeat until retaining ring

seats on the cage. (A metal to metal sound will be heard when ring

seats on cage.) Proper seating of the flapper seal and retaining ring

are shown in Fig. 43.

Flapper Components:

Place flapper into cage and align pin holes. (Fig. 44) Place spring

into position and hold with thumb. (Fig. 45) Insert pin into position.

(Fig. 46) Note: Model ‘GB’ DPFV’s do not have spring.

Figure 43 Figure 42

(41)

Baker SPD Repair Manual

Drill Pipe Float Valve

Shock Absorber:

Stand cage with side seals in the downward position. Place shock

absorber onto cage. Insert flat head screwdriver in between top of the

cage and shock absorber. (Fig. 47) Twist shock absorber around until

it seats on the DPFV cage.

Inspection:

Review assembly to assure flapper moves freely and seals properly.

Assure flapper retention mechanism properly fits and functions on

model ‘GC’ DPFV.

(42)

Baker SPD Repair Manual

Drill Pipe Float Valve

Paint and Packaging:

Prior to assembly all metal components except springs will be painted

“Baker Blue”.

Package all DPFV’s in the appropriate white box with appropriate labeling.

Contact Baker SPD manufacturing department for detailed information

regarding painting and packaging.

(43)

Baker SPD Repair Manual

Drill Pipe Float Valve

(44)

Baker SPD Repair Manual

Drill Pipe Float Valve

Model F Series

A B C D E F G H J

Size Minimum Minimum Minimum Maximum Maximum Maximum Maximum Minimum Minimum

1R 1.641 1.484 1.234 1.156 1.344 0.577 0.370 0.148 5.813 1F-2R 1.891 1.703 1.484 1.453 1.688 0.577 0.343 0.102 6.188 2F-3R 2.391 2.172 2.016 1.766 2.063 0.765 0.312 0.180 6.438 3F 2.797 2.531 2.203 2.109 2.391 0.827 0.406 0.203 9.906 3.5IF (BS) 3.100 2.870 2.530 2.110 2.660 0.840 0.406 0.220 9.906 4F 3.641 3.375 3.047 2.766 3.078 1.140 0.391 0.563 11.906 4R 3.453 3.172 2.891 2.578 2.969 1.015 0.344 0.242 8.250 5R 3.859 3.547 3.203 3.047 3.266 1.265 0.343 0.297 9.656 5F-6R 4.766 4.484 4.781 3.672 4.031 1.265 0.540 0.367 11.656 6F 5.672 5.391 4.953 4.609 4.969 1.265 0.540 0.351 14.531

(45)

Baker SPD Repair Manual

Drill Pipe Float Valve

Model G Series

A B C D E F G H

Size Minimum Minimum Minimum Maximum Maximum Minimum Maximum Minimum

1F-2R 1.890 1.710 1.490 1.187 0.350 0.240 0.131 5.937 2F-3R 2.391 2.172 2.016 1.436 0.312 0.305 0.194 6.156 3F 2.797 2.531 2.203 1.811 0.406 0.320 0.194 9.578 3.5IF 3.109 2.844 2.470 1.811 0.406 0.484 0.194 9.578 4R 3.453 3.172 2.891 2.249 0.343 0.414 0.255 11.563 4F 3.641 3.375 3.047 2.467 0.406 0.407 0.255 7.891 5R 3.859 3.547 3.203 2.562 0.343 0.445 0.255 9.219 5F-6R 4.766 4.484 4.078 3.186 0.540 0.531 0.350 11.218

References

Related documents

The liquid emerges from the atomizer at relatively high velocity and disintegrates in a close distance from the exit orifice in the form of a well-defined

A policy in which all of the fixed assets of a firm are financed with long-term capital, but some of the firm’s permanent current assets are financed with short-term

Steam condensate and boiler feed water (Exception: When good engineering practice precludes insulation where cooling of condensate is desirable to avoid cavitation of

Auditor’s report  Going concern assumption appropriate but a material uncertainty exists  unqualified opinion with emphasis of matter  Inadequate disclosure  qualified

Lubricate the bore plug seal groove and install the seal in the groove closest to the gripper bore (Figure

In the simplest scheme based on the boolean model for retrieval, we retrieve the documents that have occurrences of both good and teacher.. Such

○ If BP elevated, think primary aldosteronism, Cushing’s, renal artery stenosis, ○ If BP normal, think hypomagnesemia, severe hypoK, Bartter’s, NaHCO3,

Applications by university degree holders for admission to the programme leading to the Postgraduate Diploma in Education and applications by GCE ‘A’ Level or Polytechnic