V E R S I O N 2 0 0 8
V E R S I O N 2 0 0 8
Plant Design Software Suite
Piping Suite
Piping Suite
Piping Suite
Piping Suite
AutoORTHO
AutoORTHO
Piping, Structural & Civil Drafting Software
AutoFLOW
AutoFLOW
P&ID Drafting Software
AutoISO
AutoISO
Piping Isometric Drafting Software
With Piping Suite, you can stop wasting time and money and start creating flawless drawings more easily than you ever thought possible. You’ll maximize design efficiency on piping projects of all sizes and ranges of complexity.
Piping Suite boast indispensable tools to maximize productivity and efficiency while covering all other aspects of project requirements.
Each Piping Suite application is rich in features and functionality that enhance the demands of process piping design. With extensive customization available, Piping Suite enables you to conform to each customer or project’s drafting and design standards. What’s more, our dedication to ongoing research and development means our software will continually improve to meet your expectations, as well as those of your clients.
Raising the Bar on Piping Design
By combining proven
technologies with AutoCAD’s
advanced graphics engine,
PROCAD has created a piping
design software suite that will
help ensure all your projects
are completed on time, on
budget and to the exacting
standards of your organization.
Enhance productivity the PROCAD way.
Get everything you need for flawless drafting at one low price. The Piping Suite includes all three of PROCAD’s time-tested piping applications—AutoFLOW, AutoORTHO and AutoISO. You can buy these piping applications separately, or for maximum savings, purchase the Piping Suite and save 20% from the total price of the individual applications.
Features
Effective menus simplify the selection process.
Ease of Use
A clear, user-friendly interface includes on-line help and informative on-screen messages.
Easy Installation & Flexible Licensing
Install Piping Suite on a network or individual workstations and only pay for the licensing options you require. Our technicians will make sure you have all the support you need to get up and running with confidence.
Standards
Management Tools
Organize customer or project settings by assigning each project or customer its own design standards. You can even specify a variety of settings used for the customer or for the project, such as Metric or English units, layering requirements, border drawings, selected piping specs, scaling factors, dimensioning variables and more. With these settings in place, drawings created for each customer or project are consistent from start to finish.
Metric & English Units Support
Piping Suite allows you to use English or Metric units, or a combination of both.
Spec Driven Piping Design
Create your own pipe specs with a source database that includes an extensive array of fittings in a wide variety of ratings and materials.
Material Reporting Capability
The Bill of Material Generator enables you to manage each project’s material effectively including the ability to generate customized material reports.
Extensive Component Coverage
Utilize a complete library of symbols and components.
Innovative Menu System
Find the tools and commands you need quickly with a menu system designed to provide instant access.
Piping Suite
Piping Suite
Get accurate drawings with impeccable graphics
Comprehensive CAD Functionality
Timesaving features make drafting less cumbersome and highly productive. For example, Piping Suite allows you to automatically extract a component’s dimension and material data, draw the symbol and incorporate all the information into a single group.
Attention to
Drawing Aesthetics
With special attention paid to the aesthetics of each symbol and component, Piping Suite ensures your drawings accurately reflect your company’s high standards and scrupulous attention to detail.
Multiple AutoCAD® Version Support
Piping Suite works with multiple versions of AutoCAD® to minimize the need to
upgrade frequently.
Maintenance Program
Get priority technical support, professional installation and setup consultations as well as software upgrades at no extra cost when you choose this annually renewable plan.
Free Updates
PROCAD’s latest fixes and features are available on our website at no additional cost to customers. Our products support the latest Windows® operating systems and
AutoCAD® software so you can always use
the most up-to-date technology available.
Proven Software for over 16 Years
Rely on our solid reputation as a provider of excellent products, extensive services and prompt technical support.
Establish different standards for each customer and/or project to ensure that the drawings created for each instance are consistent from start to finish. For example, you can easily specify English or Metric units, layering and color schemes, border drawings, piping specs, scaling factors and dimensioning variables.
Create your own pipe specs with an extensive source database that includes an impressive array of fittings in a variety of ratings and materials. What’s more, you can organize and print specs, edit existing specs and even add new material to the source database.
Manage each project’s material with a level of efficiency that only PROCAD can provide. The BOM generation tools enable you to create reports for a single drawing, a group of drawings or an entire project while selecting which components are to be included or excluded. You can also choose whether your final output is formatted for the Internet, a spreadsheet or a database interface so your reports are always made available in the way most relevant for your project or customer.
Standards Manager
Spec Generator
Bill of Material Settings Manager
Enhance productivity the PROCAD way.
The AutoFLOW, AutoORTHO and AutoISO applications include all the support modules to increase your productivity. These modules will facilitate you to create standards for each project, generate specs for use in multiple projects and provide you with robust material reporting capabilities.
Piping Suite
Piping Suite
Intelligent
software creates
intelligent designs.
AutoFLOW
AutoFLOW
P&ID Drafting Software
* Piping Suite includes AutoFLOW, AutoORTHO & AutoISO
Extensive functionality and complete ANSI/ISA symbology means you can easily create Piping & Instrumentation Diagrams (P&IDs) and Process Flow Diagrams (PFDs). With functions for drawing vessels, exchangers and other equipment as well as an automated layering system that lets you customize layers to conform to company standards, AutoFLOW enables you to create diagrams as accurate as you, and your clients, demand them to be.
With AutoFLOW you will quickly and easily create flow sheets, valve bills of material, equipment lists, instrument lists and line number lists, often with just one click of the mouse. Additional features such as the ability to automatically trim lines before placing valves, instruments and other symbols means you’ll be able to complete your work more quickly which ultimately saves time and money for you and your clients.
Packed with timesaving features,
AutoFLOW takes your work to a higher
level of efficiency and accuracy.
Purchase as the Piping Suite Productivity Pack* and save!
AutoORTHO
AutoORTHO
Piping, Structural & Civil Drafting Software
Robust features
that work as hard
as you do.
* Piping Suite includes AutoFLOW, AutoORTHO & AutoISO
AutoORTHO comes standard with everything you need to get to work almost as soon as you install the software including a complete selection of standard pipe fittings, a function to calculate pipe spacing on pipe racks and a full range of valve types. Though a fully automated program, AutoORTHO puts you in control with a full menu of system overrides that give you the ability to override current spec settings and add special components or even change the parameters for components. Automated features at every turn speak to PROCAD’s ability to create intuitive software that seems to know as much about drafting as you do. For instance, the Auto-Route function simplifies the drafting process by placing piping components sequentially so you can work faster and still create the detailed, accurate drawings you need.
Create more intelligent drawings with
PROCAD’s comprehensive application
for piping, structural and civil drafting.
Purchase as the Piping Suite Productivity Pack* and save!
Suite
Piping
Piping Suite
ISO
Auto
AutoISO
Piping Isometric Drafting Software
Intelligent
software creates
intelligent designs.
* Piping Suite includes AutoFLOW, AutoORTHO & AutoISO
The third component of PROCAD’s Piping Suite enables you to create isometrics with components containing both dimensional and material data. AutoISO’s automated functions allow you to change the isometric plane effortlessly when the program detects a change in the piping direction, verify spec compliance and branch fitting types automatically, and even calculate cut lengths of pipe when an overall dimension is entered.
The Auto-Route function, one of AutoISO’s most popular features, simplifies the drawing of isometrics considerably. After specifying a start point and direction, all you have to do is simply select one fitting after another. The application places the fittings sequentially by constantly moving the insertion point forward, saving you countless minutes in design time.
Purchase as the Piping Suite Productivity Pack* and save!
With dozens of timesaving features,
AutoISO provides the automation
and customization tools necessary for
a job well done for every job you do.
Material reports generated in your preferred format
Material Reporting Tools
Our Material Reporting Tools give you
full control over Material reports.
With Piping Suite’s comprehensive material reporting tools, users can easily control and manage their projects' material and generate material reports on each project based on whatever parameters they set. For example, you can create a report for a specified line number, or a group of line numbers in a selected spec, or select to report all the valves in a project.
When it comes to saving your report, you can save it into a named template format, utilizing and even editing as many reporting templates as needed.
The material reporting capabilities of Piping Suite software are both powerful and flexible. These features assist the user on how to setup the material reporting system and how to share the generated material information with their procurement department. Accurate and timely material reporting can make a difference in project's profitability by reducing waste and ensuring correct material counts are ordered.
Choose from a variety of output formats to generate reports that best suit your material management system:
• HTML format for publishing on the Web
• CSV format for spreadsheets like Excel
• Text files that can be imported into customer's material management software
com com
User-friendly software.
User-friendly software.
If you’re looking for significant savings, incredible functionality, robust features, enthusiastic customer support and unparalleled ease-of-use, look no further than PROCAD’s Piping Suite.
Created with cost-effectiveness in mind, our software is easily one of the best values around. What’s more, its timesaving features and automated verification tools mean your productivity and accuracy will increase, enabling you to consistently complete projects on time and on budget. For more information on ways Piping Suite can save you time and money, visit our website or contact us today.
www.procad.com
® 2D DESIGNER is a registered trademark of PROCAD Software ® AutoCAD is a registered trademark of Autodesk, Inc. ® Windows is a registered trademark of Microsoft Corporation © 2007 PROCAD Software, all rights reserved
TOLL FREE INTERNATIONAL FAX EMAIL
888 4PROCAD (US & Canada) (403) 216-3375
(403) 216-3378 [email protected]
AutoELECTRIC
V E R S I O N 2 0 0 8
V E R S I O N 2 0 0 8
Schematic & Layout
Drafting Software
AutoELECTRIC
By combining proven technologies with
AutoCAD’s advanced graphics engine,
PROCAD has created an electrical design
software that will help ensure all your
projects are completed on time, on budget
and to your clients’ satisfaction.
About 2D DESIGNER
With PROCAD’s 2D DESIGNER you can stop wasting time and money and start creating flawless drawings more easily than you ever thought possible. With 2D DESIGNER, you’ll be able to maximize design efficiency on piping projects of all sizes and ranges of complexity.
AutoELECTRIC
2D DESIGNER’s electrical application, AutoELECTRIC, is rich in functionality and features you’ll come to rely on almost immediately. With extensive customization available, AutoELECTRIC enables you to conform to each customer or project’s drafting and design standards for the highest levels of consistency and accuracy. What’s more, our dedication to ongoing research and development means our software will continually improve to meet your exacting standards and expectations.
on 2D Design
Raising the Bar
Effective menus simplify the selection process.
Features
Ease of Use
A clear, user-friendly interface includes on-line help and informative on-screen messages.
Standards
Management Tools
Organize customer or project settings by assigning each project or customer its own design standards. You can even specify a variety of settings used for the customer or for the project, such as Metric or English units, layering requirements, border drawings, scaling factors dimensioning variables and more. With these settings in place, drawings created for each customer or project are consistent from start to finish.
Easy Installation & Flexible Licensing
Install AutoELECTRIC on a network or individual work- stations and only pay for the licensing options you require. Our technicians will make sure you have all the support you need to get up and running with confidence.
Metric & English Units Support
AutoELECTRIC allows you to use Metric or English units.
Extensive
Component Coverage
Utilize a complete library of symbols and components.
Innovative Menu System
Find the tools and commands you need instantly with a menu system designed to provide quick and easy access.
AutoELECTRIC
Get accurate drawings with impeccable graphics
Features
Comprehensive CAD Functionality
Timesaving features such as the ability to automatically break the line, place the selected symbol and add its attributes or text make drafting less cumbersome and highly productive.
Attention to
Drawing Aesthetics
With special attention paid to the aesthetics of each symbol and component, AutoELECTRIC ensures your drawings accurately reflect your company’s high standards and scrupulous attention to detail.
Multiple AutoCAD® Version Support
AutoELECTRIC works with multiple versions of AutoCAD® to minimize the need to
upgrade frequently.
Free Updates
PROCAD’s latest fixes and features are available on our website at no additional cost to customers. Our products support the latest Windows® operating systems and AutoCAD®
software so you can always use the most up-to-date technology available.
Maintenance Program
Get priority technical support, professional installation and setup consultations as well as software upgrades at no extra cost when you choose this annually renewable plan.
Proven Software for over 16 Years
Rely on our solid reputation as a provider of excellent products, extensive services and prompt technical support.
with AutoELECTRIC
Simplify the production of single line diagrams, control schematics and layout drawings with AutoELECTRIC, PROCAD’s affordable and technologically advanced solution for saving valuable drafting time regardless of your project’s size or complexity. Its extensive library of symbols, automated terminal block insertion and automated wiring drafting make AutoELECTRIC the definitive choice for improving all aspects of schematic drafting. Not only does it contain predefined line types for Bus Bar, Panel Wiring and Field Wiring, but it also boasts the ability to tag Terminal Block wiring and re-number Terminal Blocks easily and effectively.
In layout mode, automated functions speed up the process of creating plans and sections. A comprehensive selection of electrical symbols and equipment as well as enhanced cable tray drafting functions make AutoELECTRIC indispensable for civil drafting functions such as drawing building outlines, doors and windows.
Use AutoELECTRIC just once, and chances are you’ll notice how quickly and more efficiently you can create high-quality, error-free plans and schematics.
com com
User-friendly software.
User-friendly software.
If you’re looking for incredible functionality, robust features, enthusiastic customer support and unparalleled ease-of-use, look no further than PROCAD’s AutoELECTRIC.
Created with cost-effectiveness in mind, our software is easily one of the best values around. What’s more, its timesaving features and automated verification tools mean your productivity and accuracy will increase, enabling you to consistently complete projects on time and on budget. For more information on ways AutoELECTRIC can save you time and money, visit our website or contact us today.
www.procad.com
® 2D DESIGNER is a registered trademark of PROCAD Software ® AutoCAD is a registered trademark of Autodesk, Inc. ® Windows is a registered trademark of Microsoft Corporation © 2007 PROCAD Software, all rights reserved
TOLL FREE INTERNATIONAL FAX EMAIL
888 4PROCAD (US & Canada) (403) 216-3375
(403) 216-3378 [email protected]
