• No results found

The Effect of Sr and Sic Addition on the Microstructure and Mechanical Properties of 319 Aluminium Alloy

N/A
N/A
Protected

Academic year: 2020

Share "The Effect of Sr and Sic Addition on the Microstructure and Mechanical Properties of 319 Aluminium Alloy"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 5.1 XRD analysis results
Fig 5.2.a: Optical image of pure 319 alloy b: Al 319+Sr, c: Al 319+SiC, d: Al 319 +SiC+Sr
Fig 5.3 Hardness results
Fig 5.5 wear results of Al 319+SiC+Sr and unmodified Al 319.

References

Related documents

The degree of resistance exhibited after 1, 10 and 20 subcultures in broth in the absence of strepto- mycin was tested by comparing the number of colonies which grew from the

Keywords: Adolescent school girls, Cameroon, Condom use, Sexual activity, Sexually transmitted infections, Unwanted pregnancies.. To cite this article: Foumane P, Chiabi A, Kamdem

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

As a teacher of English to exchange students from Japan, the Philippines, and Vietnam, the primary researcher for this study found that motivation for learning

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

Phytochemical analysis and free radical scavenging activity were evaluated in various extract of Solanum xanthocarpum, Glycyrrhiza glabra, Ricinus communis,

This is based on the Novel Partial product Generation method using Higher radix-256 Booth encoding (NPGHB) which reduces the number of partial product rows by 8-fold.. Hence

Telmisartan, a widely prescribed anti hypertensive drug belongs to class II under BCS classification and exhibit low and variable oral bioavailability due to