• No results found

A. Fault-Tolerant Architectures

N/A
N/A
Protected

Academic year: 2020

Share "A. Fault-Tolerant Architectures"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2 Architecture of the PSC
Fig. 5 The Relay Window
Fig. 7 The operation of Protection DBA with a Relay Window
Fig. 10(b) AF MAX Delay Traffic Load(%)EF Jitter

References

Related documents

The simulation considers two specific kinds of Byzantine faults, the No Jump model where faulty nodes follow their own firing cycle without reacting to firings heard from other

Microcontroller SelectMap Config SelectMap Readback X2 Interface Flash Memory X2 Experiment X2 JTAG Timestamp Counter Interrupt Ctrl X1 X2 SDRAM PC/104 Interface Error

Fault in fuel flow Lack of fuel Fuel tank empty Fuel pump faulty or not working Butterfly assembly faulty Air leakage through butterfly valve Spring faulty Infiltration

We are interested in assessing the effectiveness of fault tolerance in asymmetric fault-tolerant systems, with a specific interest in (a) checkers as a concrete category

Compared to an existing distributed fault tolerant quality of wireless ad-hoc networks, the proposed energy conserved fault-tolerant clusters provides less

1.2 Faults and fault tolerance 3 1.2.1 Faults 3 1.2.2 Requirements and properties of systems subject to faults 8 1.3 Elements of fault-tolerant control 10 1.3.1 Fault-tolerant

Hence, we focused on the problem of graceful fault-tolerance, where the goal is to construct a program p 0 such that (1) in the absence of faults p 0 behaves like p, (2) p 0

This differs from the proposed work, which considers transfer time and queue wait time for scheduling jobs to resources and also provides checkpoint based fault tolerance