Welcome to this introduction into a true business class network solution for you and your clients
This solution has been designed, by integrators, for integrators.
We look forward to producing an ever evolving device that will grow and adapt to the quickly evolving automation industry.
Thank you
ETH1 is the Wan Port SFP Active LAN
The CIS-80 has a fully featured routing operating system capable of dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by this powerful OS.
Atheros 600MHz 74K MIPS network processor
1000mW dual chain 2.4Ghz 802.11bgn wireless AP
128MB RAM
Five Gigabit LAN ports
Five Fast Ethernet LAN ports
SFP cage (SFP module not included!)
RJ45 serial port
Micro-USB port
User Name:cis Password:integration
Trivia:
Because this router has an IP address of 192.168.10.1, you can plug this into an existing network and run them both at one time.
Default IP:192.168.10.1 Congratulations on receiving your new CIS VPN Router
This router has been designed to offer you a seamless secure solution for integration all of your client’s integration requirements.
2)External IP address Eg. “192.168.6.110” 2)External IP address Eg. “192.168.6.110” 1) Select “Addresses” Trivia:
This router is set up as a Class C Network 192.168.10.0/24
/24 is the same as 255.255.255.0
ETH-1 has been built as the WAN port.
Shortly after connecting the routers WAN port you will see the IP address assigned
from your modem appear.
1) Select “Wireless”
2) Double click the status line to adjust the wireless SSID
Trivia:
This router is scalable.
Guest networks or office networks can be added to ensure security to critical systems
We have preconfigured this CIS router so that the only configuration required is to
adjust the SSID and to set the password
Change this to your clients SSID.
The channel frequency has been preset.
2) Select “Apply” to enable the new SSID
1) Create the new SSID here
2) Select “Security Profiles”
3) Double click to adjust Wi-Fi password 1) Select
We have set the default password to “password” as a reminder to create a secure network for your client
Create and record your new password here and apply
2) Select “Apply” to finish
1) Enter new passwords in both key locations
3) Double click for status 2) WAN port 1
1) Select “Interface”
Under the Interfaces you will see the 10 interfaces on the CIS Router
Please note the traffic on the attached port.
Here you will notice a higher level of information relating to traffic on the CIS Router ports.
View WAN status here. Select “Apply” to exit
Select the Addresses to reveal the leases tab on the CIS Router 2) Select “Leases”
1) Select “DHCP Server”
2) Double click to set set static IP’s
The default IP Pool for dynamic address has been set from 192.168.10.100 -
Create static IP address for devices that are connected to your control system, camera systems, or power management systems that you wish to maintain contact with.
1) Select “Make Static” then “Close”
2) Select “Apply” to finish
1) Set new IP
We encourage you to create static IP address in the range of 192.168.10.200 -
192.168.10.254
Custom Integration Solutions
Our On-line store provides a secure mechanism for the additional great services like those listed below.
http://www.custom-integration-solutions.com/shop/
This service will give you secure Wi-Fi Access using our generic Hotspot. Setup time is typically under 30 minutes. This can require password authentication upon request.
Need a second network for that office or cottage. This will provide you with an entirely separate network that is completely segregated from your primary network.
This is a great solution for home offices, guest suites and more.
Need additional VPN credentials for your office application? Give every staff member their own set of credential so you can control access.
