M2000 Software Architecture Dec98 pdf

This configuration example shows the loopback interface configured on the Fast Ethernet interface with an IP address of 10.10.10.100/24, which acts as a static IP address.

database difficult DNS services •  hostname to IP address translation •  host aliasing –  Canonical: relay1.south- coast.company.com –  Alias: company.com • 

LDAP host can information be configured with the hostname or IP Address of an Active Directory domain controller or you can configure a VAS LDAP proxy instance on your RSA

Proxy Not Configured—A valid IP address or hostname was not supplied in the VoIP Line Properties page (see page 5, step 13). SIP User Not Configured—A SIP User was not supplied

At a minimum, to activate the Solaris VEN using the VEN control script, you need the hostname or IP address of the PCE, an activation code (called a pairing key in the PCE

To change the designated Traffic Manager hostname after you have completed the initial configuration, or to instead switch to using an IP address, run the Brocade Configuration

Then, edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network type (1 for Ethernet), Ethernet address and the IP address, subnet mask and gateway of

Then edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network type (1 for Ethernet), Ethernet address and the IP address, subnet mask and gateway of