Waterproof functionality classification

Usage environment

Operation temperature

-20°C to 55°C。

Waterproof functionality classification

Day-to-day waterproof functionality.

The watch can be used during daily ablution or in midst of rain, so long as only the surface is exposed to the water drops and no water pressure is exerted on the device.

Battery

Items contained

A B C

D E

Device summary

1. Charging 2. APP installation 3. Device operation 4. Screen operation 5. Device functionalities 6. Setting

Charging

Before first usage, please charge the watch for 2 hours.

Connect the charger

Charging

Connect the charger.

Charging

Insert the micro-USD cable into the watch charging stand. Connect the USD cable with a power source.

A “Charging” icon will be shown on the screen. When the charging is completed, a “Full” icon will be shown on the screen.

Getting APP

Getting watch APP：

To setup your watch with a mobile device, you must first get the watch APP.

Search for 3Plus Activity Tracker in the App Store or the Android store. Download and install the APP in your mobile device.

iOS 7+，Bluetooth 4.0 BLE，iPhone 4s+，iPad3+， iPad Mini+，iPod touch5+

Connecting APP

1. Turn on the Bluetooth on your mobile device;

2. Open the 3Plus Activity Tracker App on your mobile device. If you are a new member, please register or login with an existing account. Click “Setup” after entering your personal information; 3. Make sure that the watch is located nearby. Select SWIPE from your Bluetooth menu;

4. A connection request will be shown on your mobile device.

Push the “A” button on your watch to accept the connection; 5. When the watch is connected successfully, both your watch and mobile device will receive a notification.

Summary

B button A button

A button： Push once to reduce volume； Push and hold to open Bluetooth to connect phone;

B button： Push once to increase volume (Button A must be pushed once first);

Push and hold to turn on/ off the device

Push once at the standby interface to check your sleep data or to exit

Push once at the activity data screen to return to standby interface;

All button operations will work only when the screen is on: Cautions:

1. Make sure that the charger has been inserted correctly into the charging port on your watch.

Booting up the device

Push A button once to boot up the screen. The watch screen will go off

Screen operation

All screen operations can be done by pushing the buttons and sliding the screen up and down with your finger tip.

Slide up

Slide down

Push B button to check your sleep data.

Tips:

Main menu

Time, date

Steps

Distance

Calories

Clock interface

Time, date, battery charges

Time and date on your watch will be automatically synchronized with the connected mobile device. You can also setup your preferred time and date manually through the settings of 3Plus Activity Tracker APP.

Steps, calories, distance

Sleep mode

Press and hold the B button when the screen is on to enter sleep mode.

Check your sleep data at standby interface.

Push B button once to check your sleep data or to exit;

Push and hold B button at the standby interface to enter sleep mode.

Battery charges

You can check the battery charges at the main interface.

Notifications

SMS push Email notifications Missed call reminders

Social media reminders Calendar push Bluetooth disconnection

Voice call pairing

First, connect your watch with your phone; Push and hold the A button for 5 seconds when the watch screen is on,

The following icon “ ”and the device will enter pairing state.

Turn on the Bluetooth on your phone setting;

Go to your phone Bluetooth menu and select “Search for device” or “Find audio device”

Select “Confirm”; Your device “TOUCH” will be displayed on your phone screen,

Confirm the connection; A message to confirm the connection will be displayed on your phone screen. Select “Yes”;

A small phone icon will be shown on the upper corner of your watch. It will also vibrate once, and simultaneously display the “Connection successful” on the screen. It will return to the standby interface after the successful connection. A Bluetooth

status icon will be displayed on the standby interface as following:

Calling out

Outgoing call：

Push and hold button A to call a new number or to call the latest available number in the record,

An outgoing call icon will be displayed. This function cannot be used when the current record is blank.

Call ended：

The “Call ended” screen will remain for 2 seconds before returning to the standby interface.

During a call： Display: Call duration

Call ended：

Reminder

Sport Sleep Eat

Goal

Volume adjustment

When the screen is on： Push A button once to reduce volume； Push B button once to increase volume

(Button A must be pushed once first)； 5 stages of volume adjustment are available. The volume bar and the display number will change simultaneously during volume adjustment. The screen will return to the original interface after 2 seconds without any operation.

Two modes are available： 1. Vibration + tone 2. Vibration only

Customer support

Customer support is ready to help.

Troubleshooting

APP failed to synchronize data

1. Check if your phone network and Bluetooth settings are turned on or not. Both the phone network and Bluetooth need to be on at the same time for data synchronization.

2. Check if your watch is near your phone. The connection distance is within 5 meters.

3. Make sure that your watch had been connected with your devices.

APP failed to connect with the watch

1. Check if your phone network and Bluetooth settings are turned on or not. Both the phone network and Bluetooth need to be on at the same time for data synchronization.

2. Check if your watch is near your phone. The connection distance is within 5 meters.

3. Make sure that the watch is not connected to other account.

Kindly contact us if the above didn’t solve your issues. Send us an email at：

Supported devices

iOS

iPhone 6 , iPhone 6+ , iPhone 5c , iPhone 5s , iPad Mini, iPhone 4s, etc.

Android