• No results found

Feature Engineering in the NLI Shared Task 2013: Charles University Submission Report

N/A
N/A
Protected

Academic year: 2020

Share "Feature Engineering in the NLI Shared Task 2013: Charles University Submission Report"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: Feature engineering
Table 2: A feature family. Examples are taken from the file 498.txt, namely from the sentence You are not able tosee things in a big picture
Figure 2: Information gain and mutual information visu-alization
Table 6: Cross-validation results for all submitted CUNI-closed systems.
+3

References

Related documents

The whole system, with external I/O IGBT fiber optic gate signals, executes in real- time at 80 µ s time step under the RT-Lab real-time distributed simulation software on

Table 1 Phosphorus (P) adsorption studies that have been carried out using bauxite residues,

Villajoyosa, Benidorm,  Altea, Calpe, Xàbia o Dénia nacieron como “poblas novas”, funda- das por los monarcas cristianos para aglutinar la vida, colonizar un territorio semivirgen

Even if they do, however, enough differences remain in mostly unchar- acterized minor antigens to enable immune cells from the donor and the host to recognize the other as “non-

The Advanced Warning Flasher (AWF) is a device that, at certain high-speed locations, has been found to provide additional information to the motorist describing the operation of

The algorithm trains a classifier for combinations of parameter values and applies user-defined objective functions, such as the classification error, the sensitivity, or

An estimate of the mass flow rate through the stack was based on a balance between the driving pressure due to the buoyant force of the air and the pressure drop due to turbulent