• No results found

On the Design of Planar Printed Dipole Array Antennas

N/A
N/A
Protected

Academic year: 2020

Share "On the Design of Planar Printed Dipole Array Antennas"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 3. Measurement of the dipole with a reflector at 3 GHz.
Figure 4. 3 × 1 uniform current distribution array without reflectors.
Figure 11 and in the following equation. The wider is well, so there is only to get exactly the half of the power on each sides (0.5), we need two quarter wavelength microstrip lines with an impedance equal to 25 this line, the weaker is the signal in the
Figure 16 shows the simulated and measured reflec- measured radiation pattern and tion coefficient
+3

References

Related documents

With the present work, we report ZAR1 as a cancer biomarker and also elucidate its role in human cancer using state-of-the-art methylation sequencing, transcriptomic approaches,

ST : Each boxplot represents the distribution of multilocus F ST estimates across all pairwise comparisons in an island model with n d ¼ 8 demes and across 50 independent replicates

Weaker selection, suf fi ciently strong to maintain selected alleles in a rapidly changing environment, also reduces poly- morphism (Figure 11). The phenomenon arises because

Within this region, 27 bp are highly conserved in all 12 Drosophila species (Figure 1B) and two of the three mutations in the G fragment that cause slight activation of reporter

[3] Introduces a single-stage active power factor correction (PFC) AC-DC converter which provides almost unity power factor and minimizes the THD to 7.4 %. For a

The study examined the link between rail transport and economic growth in Nigeria over the period 1970-2011 using Error Correction modelling approach.. The results show that

applications ranging from a teacup, to a building, to trees in a forest or agriculture. IoT is a networked interconnection to the everyday objects which are embedded with

In contrast, “autoignition” occurs when one or both of the reactants (fuel or.. 7 usually just the oxidixer) are already at a high enough temperature for chemical reactions to begin