STAGENOW Client 2.2 Software
Release Notes
Page 2
STAGENOW Client Software
Release Notes
Version 2.2
December 2015No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.
Zebra reserves the right to make changes to any software or product to improve reliability, unction, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra Technologies Corp. intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Zebra products.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.
Portions of this software are based in part on the work of the Independent JPEG Group.
Zebra Technologies Corporation Lincolnshire, IL U.S.A.
Page 4
Table of Contents
Table of Contents ... 4
About This Guide ... 5
Overview ... 6
StageNow Client Pre-requisites ... 6
Compatibility:... 6
Features ... 7
Known Issues and Workarounds ... 8
About This Guide
This guide captures high level feature description, known issues and workarounds of StageNow Client version 2.2 for android devices.
Please refer User Guide (accessible through “Help” Menu in the StageNow tool) and use “StageNow_and_MX_upgrade” profile to update client and MX on the device using older version of StageNow on the device or user may choose to use RD if StageNow client is not available (on JellyBean devices).
Page 6
Overview
The StageNow solution targets customers’ need for a software tool that allows out of the box device Staging and configuration. Essentially, the process by which an EMC device is configured and desired firmware / software is deployed on to the device, preparing it for a desired production use.
We tried to simplify the staging experience with the user interface and new modalities of staging. The main scope of this document is to let you know all the known issues. Please read them carefully.
StageNow Client Pre-requisites
1) MX Framework 4.3 or higher2) Android JellyBean OS or higher 3) DataWedge Software 2.2.9 or higher
Compatibility:
Supported Devices with OS Jelly bean or higher on which MX framework is supported.
S.no Device
OS OSx version
MX
Testing
1
TC8000
KK
4.4
5.0.1.4 Compliance
2
MC67NA
KK
4.5
5.0.1.4 Compliance
3
TC75
KK
4.4
5.0.1.4 Compliance
4
TC55
KK
4.4
5.0.1.4
Full
5
MC40
KK
4.5
5.0.1.4
Full
6
MC92
KK
4.5
5.0.1.4 Compliance
7
MC40
JB
3.5
4.4.3.3 Compliance
8
TC55
JB
3.2
4.4.3.3 Compliance
9
TC70(RB)
KK
4.4
5.0.1.4 Compliance
10 TC70(NRB) KK
4.1
4.4.3.3 Compliance
11
MC18N0
KK
4.5
5.0.1.4 Compliance
Features
StageNow Client software on android devices is an application to capture the configuration content generated from any Staging content generation tools including StageNow Tool using DSD documents.
StageNow Client V2 supports staging of device using Barcode, Audio and NFC tags, communicates with MX framework on the device to apply configuration settings. StageNow client can capture 1D/2D barcodes depending on the device’s capability and DataWedge configuration.
Make sure the modalities are turned ‘ON’ before attempting to stage the device. Barcode modality is always ‘ON’ for convenience.
Note: Staging Client depends on the MX framework to apply any configuration, make sure to have latest version (4.3 or higher) on the device before staging the device.
Existing version of MX framework and functionality level is shown in the StageNow Client under “Client Info”.
Note: JellyBean and non-rebranded KitKat devices can be brought to StageNow ready state by using RD client on the device. Or StageNow client and MX can be upgraded to the latest version by using “StageNow_and_MX_upgrade” profile.
Page 8
Known Issues and Workarounds
Identified Issues StageNow Client
Description Notes and Workaround
Success of the Audio staging depends on the environmental conditions, please explore the Audio staging help in the tool and Client to know
more about the audio staging expectations. NA Audio staging uses Microphone to collect data, it
can block any other application from using the same, at the same time, if some other application is already using the microphone, StageNow will not be able to acquire the data. For this reason Audio staging modality will be disabled.
NA
Indefinite wait loop is seen when the Audio staging modality is toggled ON/OFF repeatedly
Exit the StageNow client app by selecting the ForceStop option (in setting >>apps >> StageNow) and re-launch StageNow.
Audio staging not working on TC55 KK with built in Microphone
Looks like there is some issue with the built-in microphone, connectbuilt-ing the external Mic could solve the problem.
SN client will keep the device ON when the SN client is in the foreground
It’s as designed to make the job of a staging operator easy to see the status of staging multiple device at a time. This could drain the battery if the StageNow is left in the foreground after staging. Close StageNow client as soon as Staging is done.
Wi-Fi Setting with EAP TLS WEP 104 is not created properly on the device
NFC Staging fails if bin file size is more than one KB
This is an issue with the NFC data writer application, we will make another release of this software to address this problem. Uninstalling a .pfx certificate is not removing the
certificate from list
Back key not working when SN is background and user navigates in other screens (ex: settings, Wi-Fi config etc.)
Avoid navigating to other apps when Audio staging is in progress.
In some rare instances, NFC modality is not functional when NFC is not enabled in the settings
StageNow will enable NFC when the modality is enabled, if we don’t here sound when we tap NFC, Turn OFF and Turn ON NFC from the home screen.
Barcode scanning will not work after applying the “Encrypt Mgr” setting on a Jellybean devices.
It is observed that the camera stops working after Encrypt manager setting is applied. Because of which the barcode scanning will not work in StageNow client.
Workaround 1:
Enterprise reset would solve the problem. Workaround 2:
a) Open StageNow profile in the DataWedge software on the device, b) Change the scanner to “Serial SSI” c) Reboot Device.
d) Open DataWedge, Edit StageNow profile, Change the scanner back to Camera.
Barcode scanner will not work on the first press if time there is no delay of 2 sec from the moment the page is loaded
We would need a delay of 2 sec from the moment the page is activated to be able to launch the scanner with the first press of scanner button. The second launch of barcode scanner will work normally.
Page
10
could be some issue with the log path write permissions. Change the log path under “log settings” to a writable location.
StageNow will disappear from the device if “Verify all app signatures” flag is enabled in the Access manager setting.
This is an access security feature provided by MXMS. When this check is enabled, system will verify all apps including MX framework and StageNow client and disable application which are not with the registered signatures. User need to be careful while enabling this feature, if they want to enable, enable StageNow application signature as well, else StageNow client application will not be shown in the device.