• No results found

Optimization Of Front Axle For Heavy Commercial Vehicle By Analytical And FEA Method

N/A
N/A
Protected

Academic year: 2020

Share "Optimization Of Front Axle For Heavy Commercial Vehicle By Analytical And FEA Method"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 1: Front axle Beam Front axle includes the axle-beam, stub-axles with swivel pin brake assemblies, track rod and stub-axle arm as shown in Figure-1
Fig 2: Front axle beam linkage assembly with steering system
Table -1: Vehicles parameters
Table 3: Analytical Calculation of Deflection for Different materials
+3

References

Related documents

An analysis of the economic contribution of the software industry examined the effect of software activity on the Lebanese economy by measuring it in terms of output and value

The calculated POI, EI, Tint and PoPS of transcription units having promoters with different combinations of elements revealed that changing promoter elements

A health education program resulted in significant improvement in knowledge and menstrual hygiene practices among adolescent school girls.. In our study, the majority

Work lights* Brake pressure Parking brake Air conditioning* Air filter restriction Travel direction F/R Speed range selected Shift pressure* Turn signal indicator Engine oil

Load indicator with handset (Work Remote Control) Indicates the front and rear axle weight, the weight of a trailer and total weight. Both indicated weight on all rear axles and

Addition of trailer tongue load weight and and weight of passengers and cargo cannot cause vehicle weights to exceed the rear GAWR (Gross Axle Weight Rating) or GVWR (Gross

2 Axle Bearing Adjustment 2 Height Adjustment of Rear Axle 3 Height Adjustable Stub Axles 4 Brake Adjustment.. 5 Crash Bar Adjustment 6 Front End Alignment 9

Thanks for listening!. Contact Information