• No results found

Energy Minimizing Curve Fitting for High Order Surface Mesh Generation

N/A
N/A
Protected

Academic year: 2020

Share "Energy Minimizing Curve Fitting for High Order Surface Mesh Generation"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2 , whereas 2α =0.5 retains both energies close to the minimum. Figure 3α =maxα =1ε  and 0 for 1 indicates that the incremental method improves both energies, even if one is excluded from the ob-jective function by the particular choice of   for εα
Figure 3. Comparison of different fitting methods for “Curve 54” crossing the ridge of the screw: dotted magenta line distance-based, dashed red energy- minimizing with α =0.0, solid blue α =0.5 and dash-dotted green α =1.0
Figure 4. Evolution of the normalized error and energy functional for Curve 54 in course the energy-minimizing fitting procedure with α =0.5 using 100 steps
Figure 6. Fine mesh (blue) of a rabbit aorta and coarse mesh used for fitting (red). Fine mesh courtesy of Spencer Sherwin, Imperial College London
+2

References

Related documents

The diameter of the zone of inhibition for all the test compounds was measured and the results were compared with the standard drug Gentamycin for antibacterial activity and

The outcome of congenital hypothyroidism in the absence of screening and, hence, without early treatment, was also illustrated in the paper by Hulse (1981) where he described

The ContentSorting parameter identifies the different object types (service index, category index and message object), gives information about the sorting of the content within

During his evidence he told the court that Mr Knight did not inform him that he had been receiving chiropractic treatment since 2005, that he had a history of neck pain for 15

The threshold into the stadium is through a series of layers which delaminate from the geometry of the field to the geometry of the city and creates zones of separation,

As journalist George Padmore proclaimed, ‘Ever since Britain’s economic dependence upon the United States for loans on the one hand, and military reliance in the event of a third

The summary resource report prepared by North Atlantic is based on a 43-101 Compliant Resource Report prepared by M. Holter, Consulting Professional Engineer,