IBM System Storage N3400 offers enterprise-class Fibre Channel, iscsi, SAS, and NAS storage

62  Download (0)

Full text

(1)

IBM United States Hardware Announcement 110-004, dated February 9, 2010

IBM United States Hardware Announcement

IBM System Storage N3400 offers enterprise-class Fibre Channel, iSCSI, SAS, and NAS storage

Table of contents

1 Overview 33 Publications

2 Key prerequisites 34 Technical information 2 Planned availability date 37 Terms and conditions

2 Description 40 Prices

4 Product number 61 Order now

At a glance

The IBM® System StorageTM N3400 Model A11 and Model A21 are designed to provide:

• High data availability and system-level redundancy

• Support of concurrent block I/O and file serving over Ethernet and FC SAN infrastructures

• High throughput and fast response times

• Fibre Channel (FC), Serial Advanced Technology Attachment (SATA), and Serial Attached SCSI (SAS) disk expansion units

• Support for both block I/O via Fibre Channel (FC) and Internet Small Computer System Interface (iSCSI), and file I/O via CIFS, NFS, HTTP, and FTP protocols

• Maximum of 136 disk drives supported, for both Model A11 and Model A21

• 8 GB (per node) of random access memory

• One backend FC loop for both models

• One SAS stack for both models

• Enhanced reliability with active/active failover support on the Model 21

• Upgrade capability from Model A11 to Model A21

For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).

Overview

The IBM System Storage N3400 consists of storage controller Model A11, a single- node base unit, and the Model A21, an active/active dual-node base unit. Both models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradability, and low maintenance requirements.

The two models of the N3400 are designed to provide:

(2)

IBM United States Hardware Announcement

• High data availability and system-level redundancy to help address the needs of business-critical and mission-critical applications

• Single, integrated architecture to support concurrent block I/O and file serving over Ethernet and Fibre Channel SAN infrastructures

• High throughput and fast response times for database, e-mail, and technical applications

• 6 to 12 Serial Attached SCSI (SAS) or Serial Advanced Technology Attachment (SATA) disk drives (via optional features)

• Support for both block I/O via Fibre Channel (FC) and Internet Small Computer System Interface (iSCSI), and file I/O via CIFS, NFS, HTTP, and FTP protocols

• Support for maximums of 132 disk drives or 132 TB of physical storage capacity

• 8 GB of random access memory (per node)

• One backend FC loop for both models

• One SAS stack for both models

• Upgrade capability from Model A11 to Model A21

The N3400 storage controller supports the EXN1000 SATA storage expansion unit, the EXN2000 and EXN4000 FC storage expansion units, and the EXN3000 SAS/SATA storage expansion unit.

These N series models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradability, and low maintenance requirements. Additional functions, such as snapshot, mirroring, and business continuance capability, are available through optional licensed functions.

Feature exchange None

Key prerequisites

The IBM System Storage N3400 requires FC, NFS, CIFS, or iSCSI protocol function.

Planned availability date

March 5, 2010

Description

The IBM System Storage N3400 storage controllers are designed to interoperate with products capable of data transmission in the industry-standard iSCSI, CIFS, FCP, and NFS protocols. These include the IBM System p®, IBM System i® (NFS only), IBM System x®, and IBM System z® (NFS only) servers. The N3400 storage controllers consist of the Model A11 and Model A21 and associated software.

The Model A11 is designed to provide a single-node storage controller with iSCSI support, and NFS, CIFS, and FCP support via optional features. The N3400 Model A11 is a 2U storage controller that must be mounted in a standard 19-inch rack. The base chassis includes:

• 2U, standard 19-inch rackmount enclosure

• Two 1.66 GHz Intel® dual-core Xeon® LV processors

• 8 GB random access ECC memory

• 4 integrated gigabit Ethernet RJ45 ports

• Two integrated 4-Gbps small form factor (SFF) Fibre Channel ports

• One SAS port -- Quad Small Form Factor Pluggable (QSFP)

(3)

IBM United States Hardware Announcement

• One serial console port

• Two integrated Remote LAN Management (RLM) port

• Redundant hot-swappable, auto-ranging power supplies and cooling fans

The Model A11 may be upgraded to a Model A21. The upgrade from a Model A11 to a Model A21 is a disruptive upgrade.

The Model A21 is designed to provide identical function as the N3400 Model A11, but with the addition of a second processor control module (PCM) and the Clustered Failover (CFO) licensed function. The Model A21 also supports a maximum of 136 drives. The Model A21 consists of two PCMs that are designed to provide failover and failback function, helping improve overall availability. The Model A21 is a 2U rack- mountable storage controller.

The Model A21 includes:

• 2U, standard 19-inch rackmount enclosure

• 4 1.66 GHz Intel dual-core Xeon LV processors

• 16 GB random access ECC memory

• 8 integrated gigabit Ethernet RJ45 ports

• 4 integrated 4-Gbps small form factor (SFF) Fibre Channel ports

• Two SAS ports -- QSFP

• Two serial console ports

• 4 integrated Remote LAN Management (RLM) port

• Redundant hot-swappable, auto-ranging power supplies and cooling fans The N3400 storage controller Models A11 and A21 can attach a maximum of 8 FC storage expansion units, either EXN1000, EXN2000, or EXN4000. The maximum number of EXN3000 SAS/SATA storage expansion units that can be attached is four.

On the initial order of an N3400, either SAS-attached or FC-attached expansion units may be ordered, not both. Also, for an initial order, no more than six FC- attached expansion units may be ordered.

The EXN1000 storage expansion unit provides a 3U rack-mountable disk enclosure containing 5, up to a maximum of 14, serial advanced technology attachment (SATA) disk drives, either in 250 GB, 500 GB, 750 GB, or 1 TB physical capacities.

The EXN2000 and EXN4000 storage expansion units provide a 3U rack-mountable disk enclosure containing 5, up to a maximum of 14, FC disk drives. The EXN2000 and EXN4000 support the following FC disk drive speeds and capacities:

• 15,000 revolutions per minute (15K RPM) of 144 GB, 300 GB, 450 GB, and 600 GB physical capacities

• 10,000 revolutions per minute (10K RPM) of 144 GB and 300 GB physical capacities

The EXN3000 storage expansion unit is a 4U rack-mountable disk enclosure containing 5, and up to a maximum of 24, SAS or SATA disk drives. The supported disk drives are:

• SAS: 144 GB, 300 GB, 450 GB, and 600 GB physical capacities

• SATA: 500 GB, 750 GB, and 1 TB physical capacities

Each EXNx000 storage expansion unit contains a maximum of 14 (24 for SAS) disk drives, all of a particular type (rotational speed and capacity). For the initial order of the IBM System Storage N3400, you may not include EXNx000 storage expansion units containing more than two types (rotational speed and capacity) of disk drives.

The maximum raw storage capacity of the N3400 system is determined by the maximum number of disk drives supported (136) and a maximum physical storage limit of 136 TB. Both limits must be honored.

(4)

IBM United States Hardware Announcement

The following table describes the maximum supported total physical storage capacity for the N3400 Model A11 and Model A21:

Maximum Maximum Maximum Disk Disk drive storage disk physical enclosure capacity enclosures drives capacity 300 GB SAS disk drives 12 3.60 TB 450 GB SAS disk drives 12 5.40 TB 600 GB SAS disk drives 12 7.20 TB 500 GB SATA disk drives 12 6.00 TB 1 TB SATA disk drives 12 12.00 TB EXN1000 250 GB SATA disk drives 8 112 28.00 TB EXN1000 500 GB SATA disk drives 8 112 56.00 TB EXN1000 750 GB SATA disk drives 8 112 84.00 TB EXN1000 1 TB SATA disk drives 8 112 112.00 TB EXN2000 144 GB FC disk drives 8 112 19.00 TB EXN2000 300 GB FC disk drives 8 112 39.60 TB EXN3000 300 GB SAS disk drives 4 96 28.80 TB EXN3000 450 GB SAS disk drives 4 96 43.20 TB EXN3000 500 GB SAS disk drives 4 96 48.00 TB EXN3000 600 GB SAS disk drives 4 96 57.60 TB EXN3000 500 GB SATA disk drives 4 96 48.00 TB EXN3000 1 TB SATA disk drives 4 96 96.00 TB EXN4000 144 GB FC disk drives 8 112 16.12 TB EXN4000 300 GB FC disk drives 8 112 33.60 TB EXN4000 450 GB FC disk drives 8 112 50.40 TB

EXN1000 SATA storage expansion units must not share a Fibre Channel loop with EXN2000 and EXN4000 FC storage expansion units.

Section 508 of the U.S. Rehabilitation Act

Accessibility information for the IBM System Storage N3400 may be found in a US Section 508 Voluntary Product Accessibility Template (VPAT) that can be requested via IBM's Web site at

http://www.ibm.com/able/product_accessibility/index.html

Reference information

Refer to Hardware Announcement 110-005, dated February 09, 2010, IBM System Storage N series function authorization for IBM System Storage N3400.

Product number

Description Machine Model Feature N3400 Model A11 2859 A11

N3400 Model A21 2859 A21

300 GB, 15K RPM SAS HDD 2859 A11, A21 4015

450 GB, 15K RPM SAS HDD 2859 A11, A21 4016

600 GB, 15K RPM SAS HDD 2859 A11, A21 4017

500 GB SATA Drive 2859 A11, A21 4018

1 TB SATA Drive 2859 A11, A21 4020

HDD Blank Panel 2859 A11, A21 4099

Licensed Function Indicators Base Pack 2859 A11 5201

Foundation Pack 2859 A11 5202

Protection Pack 2859 A11 5203

Advanced Pack 2859 A11 5204

Data ONTAP 2859 A11 6700

CIFS 2859 A11 6002

(5)

IBM United States Hardware Announcement

HTTP 2859 A11 7003

NFS 2859 A11 6004

SyncMirror 2859 A11 7006

FlexClone 2859 A11 7011

MultiStore 2859 A11 7020

NearStore 2859 A11 7022

iSCSI Protocol 2859 A11 7025

SnapMirror/SnapVault Bundle 2859 A11 7029

FlexCache for NFS 2859 A11 7030

SnapMirror 2859 A11 7031

SnapLock Compliance 2859 A11 7032

SnapLock Enterprise 2859 A11 7033

SnapRestore 2859 A11 7035

SnapVault Primary 2859 A11 7036

SnapVault Secondary 2859 A11 7037

SnapManager SAP - Filer 2859 A11 7038

SnapManager Oracle - Filer 2859 A11 7039

SnapValidator 2859 A11 6042

Fibre Channel Protocol 2859 A11 7043

Disk Sanitization 2859 A11 7044

SnapManager/Exchange - Filer 2859 A11 7045

SnapManager/SQL - Filer 2859 A11 7046

Deduplication 2859 A11 7047

SnapManager VI - Filer 2859 A11 7048

SnapManager SharePoint-Filer 2859 A11 7049

SnapManager Hyper V - Filer 2859 A11 7050

SnapDrive for UNIX® - Filer 2859 A11 7076

SnapDrive for Win - Filer 2859 A11 7077

Base Pack 2859 A21 5251

Foundation Pack 2859 A21 5252

Protection Pack 2859 A21 5253

Advanced Pack 2859 A21 5254

Data ONTAP 2859 A21 6750

CIFS 2859 A21 6102

HTTP 2859 A21 7103

NFS 2859 A21 6104

CFO 2859 A21 6105

SyncMirror 2859 A21 7106

FlexClone 2859 A21 7111

MultiStore 2859 A21 7120

NearStore 2859 A21 7122

iSCSI Protocol 2859 A21 7125

SnapMirror/SnapVault Bundle 2859 A21 7129

FlexCache for NFS 2859 A21 7130

SnapMirror 2859 A21 7131

SnapLock Compliance 2859 A21 7132

SnapLock Enterprise 2859 A21 7133

SnapMover 2859 A21 7134

SnapRestore 2859 A21 7135

SnapVault Primary 2859 A21 7136

SnapVault Secondary 2859 A21 7137

SnapManager SAP - Filer 2859 A21 7138

SnapManager Oracle - Filer 2859 A21 7139

SnapValidator 2859 A21 6142

Fibre Channel Protocol 2859 A21 7143

Disk Sanitization 2859 A21 7144

SnapManager/Exchange - Filer 2859 A21 7145

SnapManager/SQL - Filer 2859 A21 7146

Deduplication 2859 A21 7147

SnapManager VI - Filer 2859 A21 7148

SnapManager SharePoint-Filer 2859 A21 7149

SnapManager Hyper V - Filer 2859 A21 7150

SnapDrive for UNIX - Filer 2859 A21 7176

SnapDrive for Win - Filer 2859 A21 7177

Host software SnapDrive for UNIX - AIX® 2859 A11, A21 8024

SnapDrive for UNIX - Solaris 2859 A11, A21 8025

SnapDrive for UNIX - HPUX 2859 A11, A21 8026

SnapDrive for UNIX - Linux® 2859 A11, A21 8027

SnapDrive for Windows® 2859 A11, A21 8050

ONTAP DSM for Windows MPIO 2859 A11, A21 8052

SnapManager/Oracle - WIN 2859 A11, A21 8129

(6)

IBM United States Hardware Announcement

SnapManager/Exchange - Host 2859 A11, A21 8131 SnapManager/VI - Host 2859 A11, A21 8133 SnapMgr Hyper-V - Host 2859 A11, A21 8135 SnapManager for SAP - Win 2859 A11, A21 8140 SnapManager for SQL - Host 2859 A11, A21 8141 SnapManager for Oracle 2859 A11, A21 8143 SnapManager for SAP 2859 A11, A21 8145 SnapManager SharePoint-Host 2859 A11, A21 8147 SM SharePoint Mgmt. Bundle 2859 A11, A21 8149 Single Mbox Recovery 100pk 2859 A11, A21 8150 Single Mbox Recovery 500pk 2859 A11, A21 8151 Single Mbox Recovery 1000pk 2859 A11, A21 8152 Single Mbox Recovery 2500pk 2859 A11, A21 8153 Single Mbox Recovery 5K pk 2859 A11, A21 8154 Single Mbox Recovery 10K pk 2859 A11, A21 8155 Single Mbox Recovery 50K pk 2859 A11, A21 8156 SMBR CA-ARCSERVE Extract Wiz 2859 A11, A21 8158 SMBR Tivoli® Tape Extract Wiz 2859 A11, A21 8159 SMBR Legato Tape Extract Wiz 2859 A11, A21 8160 SMBR NetBackup Extract Wiz 2859 A11, A21 8161 SMBR PST Tape Extract Wiz 2859 A11, A21 8162 SMBR HP Extract Wiz 2859 A11, A21 8163 SMBR Commvault Galaxy Ex Wiz 2859 A11, A21 8164 SMBR UltraBac Extract Wizard 2859 A11, A21 8165 SMBR Agent for Adv Search 2859 A11, A21 8166 SMBR Content Analysis Wizard 2859 A11, A21 8167 SMBR Administrative Server 2859 A11, A21 8168 OSSV Windows for Filers 2859 A11, A21 8202 OSSV Linux for Filers 2859 A11, A21 8204 OSSV OFM for Filers 2859 A11, A21 8206 OSSV UNIX for Filers 2859 A11, A21 8208 OSSV VMWare for Filers 2859 A11, A21 8210 DFM Server License 2859 A11, A21 8255 Op Mgr Store Resource Mgmt 2859 A11, A21 8257 Ops Mgr Core tier 1 license 2859 A11, A21 8261 Ops Mgr Core tier 2 license 2859 A11, A21 8262 Ops Mgr Core tier 3 license 2859 A11, A21 8263 Ops Mgr Core tier 4 license 2859 A11, A21 8264 Ops Mgr Core tier 5 license 2859 A11, A21 8265 Ops Mgr Core tier 6 license 2859 A11, A21 8266 Ops Mgr Core tier 7 license 2859 A11, A21 8267 Protect Mgr tier 1 license 2859 A11, A21 8268 Protect Mgr tier 2 license 2859 A11, A21 8269 Protect Mgr tier 3 license 2859 A11, A21 8270 Protect Mgr tier 4 license 2859 A11, A21 8271 Protect Mgr tier 5 license 2859 A11, A21 8272 Protect Mgr tier 6 license 2859 A11, A21 8273 Protect Mgr tier 7 license 2859 A11, A21 8274 Provisioning Mgr. tier 1 2859 A11, A21 8275 Provisioning Mgr. tier 2 2859 A11, A21 8276 Provisioning Mgr. tier 3 2859 A11, A21 8277 Provisioning Mgr. tier 4 2859 A11, A21 8278 Provisioning Mgr. tier 5 2859 A11, A21 8279 Provisioning Mgr. tier 6 2859 A11, A21 8280 Provisioning Mgr. tier 7 2859 A11, A21 8281 Protection Mgr. DR tier 1 2859 A11, A21 8282 Protection Mgr. DR tier 2 2859 A11, A21 8283 Protection Mgr. DR tier 3 2859 A11, A21 8284 Protection Mgr. DR tier 4 2859 A11, A21 8285 Protection Mgr. DR tier 5 2859 A11, A21 8286 Protection Mgr. DR tier 6 2859 A11, A21 8287 Protection Mgr. DR tier 7 2859 A11, A21 8288 Operations Manager for N3400 2859 A11, A21 8400 Protection Manager for N3400 2859 A11, A21 8401 Provisioning Mgr. for N3400 2859 A11, A21 8402 Protection Mgr. DR for N3400 2859 A11, A21 8403

Power Cords

PDU Pwr Cord, 42U Rack 2859 A11, A21 9000 Power Cord, Cont. Europe 2859 A11, A21 9001 Power Cord, UK 2859 A11, A21 9002 Power Cord, Japan 2859 A11, A21 9003 Power Cord, North America 2859 A11, A21 9004

(7)

IBM United States Hardware Announcement

Power Cord, Australia/N.Z. 2859 A11, A21 9005 Power Cord, Switzerland 2859 A11, A21 9006 Power Cord, Argentina 2859 A11, A21 9007 Power Cord, China 2859 A11, A21 9008 Power Cord, Denmark 2859 A11, A21 9009 Power Cord, India/S.Africa 2859 A11, A21 9010 Power Cord, Israel 2859 A11, A21 9011 Power Cord, Italy 2859 A11, A21 9012 Power Cord, N.America 250V 2859 A11, A21 9013 Power Cord, Brazil 2859 A11, A21 9014 Power Cord, Taiwan 2859 A11, A21 9015 Power Cord, Taiwan 250V 2859 A11, A21 9016 Installation

Plant install in 2101 rack 2859 A11, A21 9201 Field install rack mount kit 2859 A11, A21 9202 Uninstalled code authoriztn 2859 A11, A21 9550 MES ordering

MES Order Indicator 2859 A11, A21 9555 IBM Global Finance transaction

IGF Transaction Indicator 2859 A11, A21 9556 Port/loop counts

Num. of FC Target Ports 2859 A11, A21 9557 Num. of FC Storage Loops 2859 A11, A21 9558 Num. of SATA Storage Loops 2859 A11, A21 9559 Dual-path FC Cabling 2859 A21 9560

Model conversions

From To Description Type Model Type Model

2859 A11 2859 A21 N3400 Model A21 Feature conversions:

Type From To Description 2859 5201 5251 Base Pack 2859 5202 5252 Foundation Pack 2859 5203 5253 Protection Pack 2859 5204 5254 Advanced Pack 2859 6700 6750 Data ONTAP 2859 6002 6102 CIFS 2859 7003 7103 HTTP 2859 6004 6104 NFS

2859 7006 7106 SyncMirror 2859 7011 7111 FlexClone 2859 7020 7120 MultiStore 2859 7022 7122 NearStore 2859 7025 7125 iSCSI Protocol

2859 7029 7129 SnapMirror/SnapVault Bundle 2859 7030 7130 FlexCache for NFS

2859 7031 7131 SnapMirror

2859 7032 7132 SnapLock Compliance 2859 7033 7133 SnapLock Enterprise 2859 7035 7135 SnapRestore

2859 7036 7136 SnapVault Primary 2859 7037 7137 SnapVault Secondary 2859 7038 7138 SnapManager SAP - Filer 2859 7039 7139 SnapManager Oracle - Filer 2859 6042 6142 SnapValidator

2859 7043 7143 Fibre Channel Protocol 2859 7044 7144 Disk Sanitization

2859 7045 7145 SnapManager/Exchange - Filer 2859 7046 7146 SnapManager/SQL - Filer 2859 7047 7147 Deduplication

(8)

IBM United States Hardware Announcement

2859 7048 7148 SnapManager VI - Filer 2859 7049 7149 SnapManger SharePoint-Filer 2859 7050 7150 SnapManager Hyper V - Filer 2859 7076 7176 SnapDrive for UNIX - Filer 2859 7077 7177 SnapDrive for Win - Filer

Feature descriptions

Disk drives

SAS and SATA disk drive features (#40xx)

Feature Description

4015 300 GB, 15K RPM SAS HDD 4016 450 GB, 15K RPM SAS HDD 4017 600 GB, 15K RPM SAS HDD 4018 500 GB, SATA drive 4020 1 TB, SATA drive

Each of these features provides one disk drive. The initial order for both the N3400 Model A11 and N3400 Model A21 must include a minimum of 6 SAS HDD, up to a maximum of 12. The disk drives installed within each model must be of the same type (interface, capacity, and speed).

HDD Blank Panel (#4099)

This feature provides one blank panel used to close the space left vacant (the absence of a disk drive in a disk bay). Blank panels must be ordered in a quantity sufficient to cover any unpopulated bay, that is, the number of disk drives and blank panels for either model must equal 12 on the initial order.

Licensed function features

Licensed functions are authorized at the 2859 system level. Only one feature is required per 2859 system, regardless of the physical capacity within the 2859 system or the number of attached expansion units.

The following licensed functions are provided with the N3400 Models A11 and A21 at no additional charge:

Model A11 Model A21

feature feature Description 6700 6750 Data ONTAP

N/A 7105 CFO (Model A21 only)

The following additional licensed functions are available on the N3400 Models A11 and A21 as optional features:

Model A11 Model A21

Feature Feature Description 5201 5251 Base Pack 5202 5252 Foundation Pack 5203 5253 Protection Pack 5204 5254 Advanced Pack 6002 6102 CIFS

7003 7103 HTTP 6004 6104 NFS N/A 6105 CFO 7006 7106 SyncMirror

7011 7111 IBM System Storage N3400 with FlexClone

7020 7120 IBM System Storage N3400 with MultiStore

(9)

IBM United States Hardware Announcement

7022 7122 IBM System Storage N3400 with NearStore

N/A 7126 IBM System Storage N3400 with SnapVault Primary/Secondary 7025 7125 iSCSI Protocol

7029 7129 SnapMirror/SnapVault Bundle 7030 7130 FlexCache for NFS

7031 7131 IBM System Storage N3400 with SnapMirror

7032 7132 IBM System Storage N3400 with SnapLock Compliance

7033 7133 IBM System Storage N3400 with SnapLock Enterprise

N/A 7134 IBM System Storage N3400 with SnapMover

7035 7135 IBM System Storage N3400 with SnapRestore

7036 7136 IBM System Storage N3400 with SnapVault Primary

7037 7137 IBM System Storage N3400 with SnapVault Secondary

7038 7138 SnapManager SAP - Filer 7039 7139 SnapManager Oracle - Filer 6042 6142 IBM System Storage N3400 with SnapValidator

7043 7143 Fibre Channel Protocol 7044 7144 Disk Sanitization

7045 7145 SnapManager/Exchange - Filer 7046 7146 SnapManager/SQL - Filer 7047 7147 Deduplication

7048 7148 SnapManager VI - Filer 7049 7149 SnapManager SharePoint-Filer 7050 7150 SnapManager Hyper V - Filer 7076 7177 SnapDrive for UNIX - Filer 7077 7178 SnapDrive for Win - Win 8024 8024 SnapDrive for UNIX - AIX 8025 8025 SnapDrive for UNIX - Solaris 8026 8026 SnapDrive for UNIX - HPUX 8027 8027 SnapDrive for UNIX - Linux 8050 8050 SnapDrive for Windows 8052 8052 ONTAP DSM for Windows MPIO 8129 8129 SnapManager/Oracle - WIN 8131 8131 SnapManager/Exchange - Host 8133 8133 SnapManager/VI - Host 8140 8140 SnapManager for SAP - Win 8141 8141 SnapManager for SQL - Host 8143 8143 SnapManager for Oracle 8145 8145 SnapManager for SAP

8149 8149 SM SharePoint Mgmt. Bundle 8150 8150 Single Mbox Recovery 100pk 8151 8151 Single Mbox Recovery 500pk 8152 8152 Single Mbox Recovery 1000pk 8153 8153 Single Mbox Recovery 2500pk 8154 8154 Single Mbox Recovery 5K pk 8155 8155 Single Mbox Recovery 10K pk 8156 8156 Single Mbox Recovery 50K pk 8158 8158 SMBR CA-ARCSERVE Extract Wiz 8159 8159 SMBR Tivoli Tape Extract Wiz 8160 8160 SMBR Legato Tape Extract Wiz 8161 8161 SMBR NetBackup Extract Wiz 8162 8162 SMBR PST Tape Extract Wiz 8163 8163 SMBR HP Extract Wiz

8164 8164 SMBR Commvault Galaxy Ex Wiz 8165 8165 SMBR UltraBac Extract Wizard 8166 8166 SMBR Agent for Adv Search 8167 8167 SMBR Content Analysis Wizard 8168 8167 SMBR Administrative Server 8202 8202 OSSV Windows for Filers 8204 8204 OSSV Linux for Filers 8206 8206 OSSV OFM for Filers 8208 8208 OSSV UNIX for Filers 8210 8210 OSSV VMWare for Filers 8255 8255 DFM Server License

8257 8257 Op Mgr Store Resource Mgmt

(10)

IBM United States Hardware Announcement

8261 8261 Ops Mgr Core tier 1 license 8262 8262 Ops Mgr Core tier 2 license 8263 8263 Ops Mgr Core tier 3 license 8264 8264 Ops Mgr Core tier 4 license 8265 8265 Ops Mgr Core tier 5 license 8266 8266 Ops Mgr Core tier 6 license 8267 8267 Ops Mgr Core tier 7 license 8268 8268 Protect Mgr tier 1 license 8269 8269 Protect Mgr tier 2 license 8270 8270 Protect Mgr tier 3 license 8271 8271 Protect Mgr tier 4 license 8272 8272 Protect Mgr tier 5 license 8273 8273 Protect Mgr tier 6 license 8274 8274 Protect Mgr tier 7 license 8275 8275 Provisioning Mgr. tier 1 8276 8276 Provisioning Mgr. tier 2 8277 8277 Provisioning Mgr. tier 3 8278 8278 Provisioning Mgr. tier 4 8279 8279 Provisioning Mgr. tier 5 8280 8280 Provisioning Mgr. tier 6 8281 8281 Provisioning Mgr. tier 7 8282 8282 Protection Mgr. DR tier 1 8283 8283 Protection Mgr. DR tier 2 8284 8284 Protection Mgr. DR tier 3 8285 8285 Protection Mgr. DR tier 4 8286 8286 Protection Mgr. DR tier 5 8287 8287 Protection Mgr. DR tier 6 8288 8288 Protection Mgr. DR tier 7 8401 8401 Operations Manager for N3400 8402 8402 Protection Manager for N3400 8403 8403 Provisioning Mgr. for N3400 8404 8404 Protection Mgr. DR for N3400

Licensed function indicators

Note: For all licensed function indicators, the corequisite 2870 feature must be purchased to establish authorization for use of the coresponding licensed function before the feature activation code is provided by IBM.

Software Packs

The software packs on the N3000 systems are designed to provide simplified ordering of common combinations of software features on the N series systems.

These packs provide a discount for the included functions compared to purchasing each software feature separately.

Base Pack (#5201 and #5251)

This software pack provides the basic software functions for N series systems. It includes iSCSI, FCP, HTTP, SyncMirror, NearStore, Deduplication, and one license for Operations Manager.

Foundation Pack (#5202 and #5252)

This software pack provides the foundation for expanded use of the N series system.

It includes SnapRestore, SnapVault Primary, and one node of Provisioning Manager.

Protection Pack (#5203 and #5253)

This software pack provides the expanded protection software capabilities of the N series system. It includes SnapMirror, SnapVault Secondary, and one node of Protection Manager.

Advanced Pack (#5204 and #5254)

This software pack provides the basis for the advanced functions of the N series system. It includes FlexClone, MultiStore, SnapLock Compliance, and SnapLock Enterprise.

(11)

IBM United States Hardware Announcement Data ONTAP (#6700 and #6750)

This feature enables the Data ONTAP licensed function. Data ONTAP is an optimized, scalable, and flexible operating system for the IBM N series storage controllers that is designed for heterogeneous environments. Data ONTAP is designed to deliver flexible management and high availability, support business continuance, and support data retention, thereby helping reduce storage management complexity in your enterprise. Data ONTAP includes FlexShare, FlexCache, FlexVol, and Snapshot support.

CIFS (#6002 and #6102)

This feature enables the CIFS licensed function, which is designed to provide

connectivity to client machines so that data can be transferred via the CIFS protocol.

This feature is also used for maintenance billing purposes.

The corequisite 2870 feature must be purchased to establish authorization for use of the CIFS licensed function before the feature activation code is provided by IBM.

HTTP (#7003 and #7103)

This feature enables the HTTP licensed function which is designed to provide data transfer to and from the N3400 storage controllers via the HTTP protocol. This feature is also used for maintenance billing purposes.

NFS (#6004 and #6104)

This feature enables the NFS licensed function provided you have applied a feature activation code that is made available by IBM. The NFS licensed function is designed to provide connectivity to client machines that transfer data via the NFS protocol.

This feature is also used for maintenance billing purposes.

CFO (#6105 - A21 only)

Installed on a pair of N series storage controllers, this feature is designed to enable the transfer of data service from an unavailable controller to the other controller in the cluster. It is designed to deliver a robust and highly available data service for business-critical environments.

FlexClone (#7011 and #7111)

This feature enables the FlexClone licensed function provided you have applied a feature activation code that is made available by IBM. FlexClone is designed to enable true cloning -- near-instant replication of data volumes and data sets -- without requiring additional storage space at the time of creation. This feature is also used for maintenance billing purposes.

MultiStore (#7020 and #7120)

This feature enables the MultiStore licensed function provided you have applied a feature activation code that is made available by IBM. MultiStore is designed to enable multiprotocol storage consolidation across enterprises. It is designed to provide partitioning of network and storage resources and enable multidomain and multiserver consolidation on a single storage appliance. In addition, it is designed to help reduce data management cost by introducing a tiered management model enabling cost-effective administration. This feature is also used for maintenance billing purposes.

Note: The combination of Fibre Channel Protocol (#7043 and #7143) and MultiStore (#7020 and #7120) is supported only on virtual filer 0. They are otherwise mutually exclusive.

(12)

IBM United States Hardware Announcement NearStore (#7022 and #7122)

This feature is designed to help optimize a storage controller for data protection and retention applications. It enables additional concurrent streams and SnapVault for NetBackup.

iSCSI Protocol (#7025 and #7125)

This feature enables the iSCSI Protocol licensed function, which is designed to provide connectivity to clients that transfer data via the iSCSI protocol. You must apply a feature activation code made available by IBM. This feature is also used for maintenance billing purposes.

SnapMirror/SnapVault Bundle (#7029 and #7129)

This feature is a bundle of the SnapMirror and SnapVault Secondary features, designed to provide improved value for the combination. It is typically used by customers wanting to provide a mirrored, remote site for their data backup. This feature is designed to accomplish that by having the SnapVault function create an initial, local backup copy of the data, and then having the SnapMirror function copy the data to a remote site. SnapVault Primary and SnapManager are not included in this bundle.

FlexCache for NFS (#7030 and #7130)

FlexCache for NFS is designed to create a caching layer in your storage

infrastructure that helps to eliminate performance bottlenecks in NFS environments.

It is designed to replicate hot data sets to local caching volumes anywhere in the infrastructure. This is useful with NFS implementations in compute-intensive applications, distributed computing environments, and reverse tiered storage. For additional detail and assistance with planning, it is highly recommended that you refer to the documentation for FlexCache.

SnapMirror (#7031 and #7131)

This feature enables the SnapMirror licensed function provided you have applied a feature activation code that is made available by IBM. SnapMirror is designed to replicate data between one or more N series storage controllers. It is designed to continually update the mirrored data to help keep it current and available for disaster recovery, offloading tape backup, read-only data distribution, testing on nonproduction systems, and online data migration. This feature is also used for maintenance billing purposes.

SnapLock Compliance (#7032 and #7132)

This feature enables the SnapLock Compliance licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

SnapLock Enterprise (#7033 and #7133)

This feature enables the SnapLock Enterprise licensed function provided you have applied a feature activation code that is made available by IBM. SnapLock Enterprise is designed to provide high performance and high-security data permanence to disk- based primary and secondary N3400 storage subsystems. An integrated element of the proven IBM Data ONTAP operating system, SnapLock software is designed to support the accuracy, integrity, and security of data by helping prevent the alteration of business records and allow rapid online access for long periods of time. SnapLock Enterprise allows administrators to delete entire SnapLock Enterprise volumes.

However, it is designed to prevent any SnapLock Enterprise user or administrator from deleting or modifying individual SnapLock Enterprise WORM records. This feature is also used for maintenance billing purposes.

(13)

IBM United States Hardware Announcement SnapMover (#7134 - Model A21 only)

This feature enables the SnapMover licensed function provided you have applied a feature activation code that is made available by IBM. SnapMover is designed to provide a no-copy data migration solution for workload distribution among N series storage controllers sharing common backend storage while avoiding impact to data availability and disruption to users. This helps organizations to efficiently address evolving storage and performance requirements while maintaining user productivity.

This feature is also used for maintenance billing purposes.

SnapRestore (#7035 and #7135)

This feature enables the SnapRestore licensed function provided you have applied a feature activation code that is made available by IBM. SnapRestore is designed to help an enterprise to recover from data loss that may occur due to user error, viruses, or many other disasters. SnapRestore is designed to help users recover data, from individual files to multi-terabyte volumes, using snapshot copies, to help allow quick resumption of operations. This feature is also used for maintenance billing purposes.

SnapVault features

SnapVault provides a centralized disk-based backup solution for heterogeneous storage environments. Storing backup data in multiple snapshot copies on the SnapVault secondary storage system from multiple SnapVault primary systems helps let enterprises keep weeks of backups online for fast restoration. Backing up multiple SnapVault primary storage systems to a single SnapShot copy on a large SnapVault secondary storage system can help allow enterprises to centralize their backup and restore operations in a single location. SnapVault primary storage systems can be local or remote N3400 storage controllers, Windows servers, or UNIX servers connected via a LAN or a WAN. The SnapVault secondary storage system can also be located at a remote disaster recovery site to help protect against production site failures.

SnapVault Primary and SnapVault Secondary may be concurrently installed on an N3400 Model A21. This allows data to be backed up from one node of the Model A21 to the other node. Each must be installed on its own node, that is, SnapVault Primary must be installed on one of the two nodes and SnapVault Secondary on the other. They may never both be installed on the same node. Data ONTAP 7.2.1, or later, is required.

SnapVault Primary (#7036 and #7136)

This feature enables the SnapVault Primary licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

SnapVault Secondary (#7037 and #7137)

This feature enables the SnapVault Secondary licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

SnapManager SAP - Filer (#7038 and #7138)

This feature is designed to allow SAP administrators to back up and restore an SAP System hosted on an Oracle Database. It is integrated with the interface for SAP tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems.

This feature allows connectivity of any number of SAP servers to one storage

controller. SnapDrive for UNIX (one of features #8024 through #8027) or SnapDrive for Windows is required.

(14)

IBM United States Hardware Announcement

SnapManager Oracle - Filer (#7039 and #7139)

IBM SnapManager for Oracle is designed to integrate with an Oracle Database and automate crucial tasks such as backup, restore, database recovery, and cloning.

Note: FlexClone is required with NFS and is optional for FCP and iSCSI environments. SnapRestore is always required with SnapManager for Oracle.

When using iSCSI or FCP, you must have the appropriate host support kit (iSCSI - downloadable) or FCP Host Attach Kit.

This feature allows connectivity of any number of Oracle servers to one storage controller. SnapDrive for UNIX (one of features #8024 through #8027) or SnapDrive for Windows is required.

SnapValidator (#6042 and #6142)

This feature enables the SnapValidator licensed function provided you have applied a feature activation code that is made available by IBM. SnapValidator is tightly integrated with the Oracle Database architecture and complies with the Oracle Hardware Assisted Resilient Data (HARD) initiative. It is designed to detect and prevent potential corruptions of Oracle data before they happen. By adding intelligence and database awareness to modular storage systems (across SAN, iSAN, and NAS protocols), IBM N3400 SnapValidator helps to enable advanced database protection functionality to a broader array of organizations. This feature is also used for maintenance billing purposes.

Fibre Channel Protocol (#7043 and #7143)

This feature enables the Fibre Channel Protocol licensed function, which is designed to provide connectivity to client machines that transfer data via the FCP protocol provided you have applied a feature activation code that is made available by IBM.

This feature is also used for maintenance billing purposes.

Note: The combination of Fibre Channel Protocol (#7043 and #7143) and MultiStore (#7020 and #7120) is supported only on virtual filer 0. They are otherwise mutually exclusive.

Disk Sanitization (#7044 and #7144)

This feature enables the Disk Sanitization licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.

SnapManager/Exchange - Filer (#7045 and #7145)

This feature enables the SnapManager/Exchange - Filer licensed function provided you have applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft® Exchange is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N3400 storage systems, SnapManager software is designed to provide near- instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for Exchange environments.

This feature allows connectivity of any number of exchange servers to one N3400 storage controller.

Note: SnapManager/Exchange - Filer and SnapManager/Exchange - Host (#8131) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/Exchange - Filer allows connectivity to any number of hosts, SnapManager/Exchange - Host allows just one host connection.

If the planned number of hosts to be supported, multiplied by the feature #8131 price, is greater than the price of SnapManager/Exchange - Filer (#7045 or #7145),

#7045 or #7145 may be a more cost-effective choice. Other factors may influence this decision.

(15)

IBM United States Hardware Announcement

This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/

Exch - Media Kit, and SnapDrive for Windows to be installed on the machine.

This feature is also used for maintenance billing purposes.

SnapManager/SQL - Filer (#7046 and #7146)

This feature enables the SnapManager/SQL - Filer licensed function provided you have applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft SQL is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N3400 storage systems, SnapManager software is designed to provide near- instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SQL environments.

This feature allows connectivity of any number of SQL servers to one N3400 storage controller.

Note: SnapManager/SQL - Filer and SnapManager for SQL - Host (#8141) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/SQL - Filer allows connectivity to any number of hosts, SnapManager for SQL - Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8141 price, is greater than the price of SnapManager/SQL - Filer (#7046 or #7146), #7046 or #7146 may be a more cost-effective choice. Other factors may influence this decision.

This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/

SQL - Media Kit, and SnapDrive for Windows to be installed on the machine.

This feature is also used for maintenance billing purposes.

Deduplication (#7047 and #7147)

This feature is designed to provide block-level deduplication within the entire flexible volume on an IBM N series storage controller that has the NearStore feature enabled. Deduplication only stores unique data blocks in the flexible volume and creates a small amount of additional metadata in the process. Each block of data has a digital "signature" that is compared to all other signatures in the flexible volume. If an exact byte-for-byte block match exists on the flexible volume, the duplicate block is discarded and its disk space is reclaimed.

SnapManager VI - Filer (#7048 and #7148)

IBM SnapManager for Virtual Infrastructures (SnapManager VI) is designed to integrate with a virtual server infrastructure and automate crucial tasks such as backup, restore, recovery, and cloning. It allows connectivity of any number of VMWare servers to one storage controller.

SnapManager SharePoint-Filer (#7049 and #7149)

This feature enables the SnapManager SharePoint-Filer licensed function provided the customer has applied a feature activation code that is made available by IBM.

IBM SnapManager for Microsoft Office SharePoint Server (SMMOSS) is designed to enable a single console to manage disk-based backup and recovery of SharePoint content databases, portals, sites, sub-sites, folders, documents, and versions of documents. Deployed in combination with an N series storage system, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SharePoint environments.

This feature is designed to allow connectivity of any number of Microsoft Office SharePoint servers to one N series storage system. It is also used for maintenance billing purposes.

(16)

IBM United States Hardware Announcement

SnapManager Hyper-V - Filer (#7050 and #7150)

These features are designed to integrate with the Microsoft Hyper-V virtual server infrastructure and automate crucial tasks such as backup, restore, recovery, and cloning. It allows connectivity of any number of Microsoft Hyper-V servers to one storage controller.

SnapDrive for UNIX - Filer (#7076 and #7176)

This feature is designed to provide software that enhances the storage management capability of UNIX-based systems, including easier management of dynamic

volume management, cluster management, snapshot management, and replication management. One feature allows the connection of any number of hosts to the licensed storage controller.

SnapDrive for Win - Filer (#7077 and #7177)

This feature is designed to provide software that enhances the storage management capability of Windows-based systems, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature allows the connection of any number of hosts to the licensed storage controller.

Host software

Note: For all host software, the corequisite 2870 feature must be purchased to establish authorization for use of the corresponding licensed function before the feature activation code is provided by IBM.

SnapDrive for UNIX - AIX (#8024)

This feature is designed to provide a software application that enhances the storage management capabilities in a AIX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.

SnapDrive for UNIX - Solaris (#8025)

This feature is designed to provide a software application that enhances the storage management capabilities in a Solaris environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.

SnapDrive for UNIX - HPUX (#8026)

This feature is designed to provide a software application that enhances the storage management capabilities in a HP-UX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.

SnapDrive for UNIX - Linux (#8027)

This feature is designed to provide a software application that enhances the storage management capabilities in a Linux environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.

SnapDrive for Windows (#8050)

This feature provides SnapDrive for Windows function. One feature must be

ordered for each host on which it will be installed. It provides a software application that is designed to enhance the storage management capability in a Windows

(17)

IBM United States Hardware Announcement

environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management.

Note: Feature number 8052 is highly recommended when using feature number 8050 with FCP.

Note: If running with FCP, feature #8100 is a corequsite. If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from

http://www.ibm.com/storage/support/nas

ONTAP DSM for Windows MPIO (#8052)

This feature provides the multipathing MPIO driver for FC data transmission in Windows environments connected to N series machines. It is required when FC multipathing function is required.

Note: Feature number 8052 is highly recommended when using feature number 8050 with FCP.

SnapManager/Oracle - WIN (#8129)

IBM SnapManager for Oracle is designed to integrate with an Oracle Database and automate crucial tasks such as backup, restore, database recovery, and cloning. This feature allows connection of one Oracle host server to a storage controller. One of this feature is required for each Oracle host. Snapmanager for Oracle for Windows is available for Oracle databases running on Windows.

SnapManager/Exchange - Host (#8131)

This feature allows connection of one exchange host server to a storage controller.

One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached storage controller.

Note: SnapManager/Exchange - Host and SnapManager/Exchange - Filer (#7045 or #7145) provide identical function but support different numbers of hosts.

Only one or the other is needed, not both. SnapManager/Exchange - Filer allows connectivity to any number of hosts, SnapManager/Exchange - Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8131 price, is greater than the price of SnapManager/Exchange - Filer (#7045 or #7145), #7045 or #7145 may be a more cost-effective choice. Other factors may influence this decision.

This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/

Exch - Media Kit, and SnapDrive for Windows to be installed on the machine.

SnapManager VI - Host (#8133)

This feature provides SnapManager function for Virtual Infrastructure (VI) environments, utilizing the VMWare system. It is designed to provide snapshot management for any number of N series controllers attached to a single VMWare host.

SnapMgr Hyper-V - Host (#8135)

This feature is designed to integrate with the Microsoft Hyper-V virtual server infrastructure and automate crucial tasks such as backup, restore, recovery, and cloning. It allows one Microsoft Hyper-V server to connect to any number of N series controllers.

Note: Use of this feature with FCP requires the FCP protocol feature, the host attach kit for the appropriate hosts, and one of the SnapDrive for Windows features. If running with iSCSI, the iSCSI protocol feature and appropriate iSCSI host attach kit are required.

SnapManager for SAP - Win (#8140)

This feature is designed to allow SAP administrators in Windows environments to back up and restore a SAP System hosted on an Oracle Database. It is integrated

(18)

IBM United States Hardware Announcement

with the interface for SAP tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems.

This feature includes feature #8050, SnapDrive for Windows.

One of this feature must be ordered for each host on which it will be installed.

Note: SnapRestore is always required with SnapManager for SAP. The necessary SnapDrive code and license are included as part of the SnapManager for SAP feature.

SnapManager for SQL - Host (#8141)

This feature allows connection of one SQL host server to a storage controller. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached storage controller.

Note: SnapManager for SQL - Host and SnapManager/SQL - Filer (#7046 or #7146) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/SQL - Filer allows connectivity to any number of hosts, SnapManager for SQL - Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8141 price, is greater than the price of SnapManager/SQL - Filer (#7046 or #7146), #7046 or #7146 may be a more cost-effective choice. Other factors may influence this decision.

This feature requires either FCP or iSCSI Protocol, and SnapRestore, and SnapDrive for Windows to be installed on the machine.

SnapManager for Oracle (#8143)

IBM SnapManager for Oracle is designed to integrate with an Oracle Database and automate crucial tasks such as backup, restore, database recovery, and cloning. This feature allows connection of one Oracle host server to a storage controller. One of this feature is required for each Oracle host.

Note: FlexClone is required with NFS and is optional for FCP and iSCSI environments. SnapRestore (#7035 and #7135) is always required with

SnapManager for Oracle. The necessary SnapDrive code and license are included as part of the SnapManager for Oracle feature. When using iSCSI or FCP, you must have the appropriate host support kit (iSCSI - downloadable) or FCP attach kit (downloadable) available.

SnapManager for Oracle requirements vary depending on the host OS. For full details on supported operating system levels, Oracle database levels, and other SnapManager for Oracle requirements, refer to the N series interoperability matrix at

http://www.ibm.com/servers/storage/nas

SnapManager for SAP (#8145)

This feature is designed to allow SAP administrators to back up and restore a SAP System hosted on an Oracle Database. It is integrated with the interface for SAP br* tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems.

This feature includes feature #8040 and SnapManager for Oracle (#8143). Features

#8024 through #8027 and #8143 need not be ordered if SnapManager for SAP (#8145) is ordered.

One of this feature must be ordered for each CPU on each host on which it will be installed.

Note: FlexClone is required with NFS and is optional for FCP and iSCSI environments. SnapRestore (#7035 and #7135) is always required with

SnapManager for Oracle. The necessary SnapDrive code and license are included as part of the SnapManager for Oracle feature. When using iSCSI or FCP, you must

(19)

IBM United States Hardware Announcement

have the appropriate host support kit (iSCSI - downloadable) or FCP attach kit (downloadable) available.

SnapManager SharePoint-Host (#8147)

This feature enables the SnapManager SharePoint-Host licensed function provided the customer has applied a feature activation code that is made available by IBM.

IBM SnapManager for Microsoft Office SharePoint Server (SMMOSS) is designed to enable a single console to manage disk-based backup and recovery of SharePoint content databases, portals, sites, sub-sites, folders, documents, and versions of documents. Deployed in combination with an N series storage system, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SharePoint environments.

This feature is designed to allow connectivity to a single Microsoft Office SharePoint CPU to one N series storage system. It is also used for maintenance billing purposes.

SM SharePoint Mgmt. Bundle (#8149)

This feature includes SnapManager for SQL - Host (#8141), SnapManager SharePoint-Host (#8147), and SnapDrive for Windows (#8050). It is a feature bundle designed to simplify the feature ordering for SM Sharepoint environments.

Single Mailbox Recovery

Single Mailbox Recovery for Microsoft Exchange (SMBR) software is designed to provide rapid recovery of single mailboxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any offline Exchange server, or to an Outlook .pst file. The software can help save time and money by avoiding the need for cumbersome and disk-intensive brick-level backups or investments in a dedicated recovery server infrastructure.

Single Mbox Recovery 100pk (#8150) This feature provides support for 100 mailboxes.

Single Mbox Recovery 500pk (#8151) This feature provides support for 500 mailboxes.

Single Mbox Recovery 1000pk (#8152) This feature provides support for 1,000 mailboxes.

Single Mbox Recovery 2500pk (#8153) This feature provides support for 2,500 mailboxes.

Single Mbox Recovery 5K pk (#8154)

This feature provides support for 5,000 mailboxes.

Single Mbox Recovery 10K pk (#8155)

This feature provides support for 10,000 mailboxes.

Single Mbox Recovery 50K pk (#8156)

This feature provides support for 50,000 mailboxes.

SMBR CA-ARCSERVE Extract Wiz (#8158)

The CA-ARCSERVE Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any

(20)

IBM United States Hardware Announcement

alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Tivoli Tape Extract Wiz (#8159)

The Tivoli Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Legato Tape Extract Wiz (#8160)

The Legato Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR NetBackup Extract Wiz (#8161)

The NetBackup Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR PST Tape Extract Wiz (#8162)

The PST Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR HP Extract Wiz (#8163)

The HP Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Commvault Galaxy Ex Wiz (#8164)

The Commvault Galaxy Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR UltraBac Extract Wizard (#8165)

The UltraBac Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Agent for Adv Search (#8166)

The SMBR Agent for Advanced Search is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.

SMBR Content Analysis Wizard (#8167)

The SMBR Content Analysis Wizard (CAW) is designed to enable you to automate and save search results with Microsoft Exchange by selecting sources, including entire Exchange Database (EDB) files, individual mailboxes from an EDB, or folders from an EDB. Any number of sources is allowed, including multiple EDBs.

(21)

IBM United States Hardware Announcement

CAW provides a method for e-mail administrators to perform content analysis offline from the production server. It is designed to:

• Minimize the time it takes to detect and filter out e-mails that include specific content.

• Minimize the time it takes to detect and filter out a specific type of e-mail file that is being sent or received (for example, specific extension, subject, date), or e- mails being sent and received.

• Analyze the number of e-mails being sent and received that contain politically incorrect content (for example, tasteless jokes or pornography).

• Analyze the number of e-mails with confidential content that go out unprotected, that is, unencrypted.

• Minimize the time it takes to determine if someone is using the system for unauthorized activity (for example, spamming, inappropriate downloads, starting a business).

SMBR Adminstrative Server (#8168)

This feature is designed to provide a framework that can host centralized services for multiple clients and provide both client and server support for Single Mailbox Recovery 5.0, or later and Single Mailbox Recovery ExtractWizard users. It facilitates server configuration, mailbox permissions, and application auditing services for SMBR environments.

Open Systems SnapVault agents

Open Systems SnapVault is designed to be a heterogeneous, disk-to-disk data protection solution. An OSSV primary system corresponds to a backup client in the traditional backup architecture. The SnapVault secondary system is always an N series system running Data ONTAP. OSSV software is designed to protect data residing on the primary system, which can be a storage system attached to a server running an operating system such as AIX, Windows, VMWare or Linux.

Three main components are installed within the OSSV environment:

• The primary system

• The OSSV agent residing on the primary system

• The secondary system (N series) with the SnapVault Secondary feature

A predetermined directory or file system is chosen to be backed up to the secondary storage. The data set is mapped to a secondary system qtree on a secondary storage system.

The OSSV license is applied to the N series system being used in the environment.

One license is required per host to be protected with OSSV.

OSSV Windows for Filers (#8202)

This Open System SnapVault feature is designed to support data structures in a Windows storage controller environment.

OSSV Linux for Filers (#8204)

This Open System SnapVault feature is designed to support data structures in a Linux storage controller environment.

OSSV OFM for Filers (#8206)

This Open System SnapVault feature is designed to support data structures in a Open File Manager storage controller environment.

(22)

IBM United States Hardware Announcement OSSV UNIX for Filers (#8208)

This Open System SnapVault feature is designed to support data structures in a UNIX storage controller environment.

OSSV VMWare for Filers (#8210)

This Open System SnapVault feature is designed to support data structures in a VMWare storage controller environment.

DFM Server License (#8255)

This feature provides a license for one DFM Server. One of this feature must be installed on each server that is to provide DFM Server functions for managing N series storage controllers.

Note: This feature is required for Provisioning Manager and requires DFM Server V3.7, or later.

Operations Manager Core (OMC)

The OMC features are designed to provide a central point of control and to provide alerts, reports, and configuration tools. These tools are designed to help manage storage and content delivery infrastructure, consistent with business requirements, and help maximize availability and reduce total cost of ownership.

OMC provides a license that allows the use of the OMC features on the N series machine for which they are ordered. This machine is the "managing" machine; those to be managed are the "managed" machines. All OMC features must be ordered for only the managing machine. One tier license feature must be ordered for each node to be managed, including the node(s) of the managing machine.

A Model A11 consists of one node; a Model A21 consists of two nodes. On the initial order, the number (quantity) of the tier features ordered defines the number of managed nodes, and the N series machine types and models, for which the feature is authorized. That number may be increased via a subsequent (MES) order by ordering the incremental number of OMC tier x license features (#826x). The MES order must be for the managing machine. For example, if the number of nodes to be managed is to be increased by ten, the number of #826x features, which must be ordered in the MES order, is ten. Any combination of #826x features may be included in the same MES order.

It is necessary to select the appropriate tier for each N series machine you will be managing with the OMC license. Multiple N series machines are managed with one OMC license, but the support for multiple machines must be reflected in the tiers that are ordered. The relationship of N series machines to tiers, and associated feature numbers, is as follows.

Machine Operations Manager feature N series type Model Number Name

N3300 2859 A10 8261 Ops Mgr Core tier 1 license A20 8261 Ops Mgr Core tier 1 license N3400 2859 A11 8400 Operations Manager for N3400 A21 8400 Operations Manager for N3400 N3600 2862 A10 8262 Ops Mgr Core tier 2 license A20 8262 Ops Mgr Core tier 2 license N3700 2863 A10 8262 Ops Mgr Core tier 2 license A20 8262 Ops Mgr Core tier 2 license N5200 2864 A10 8263 Ops Mgr Core tier 3 license A20 8263 Ops Mgr Core tier 3 license G10 8263 Ops Mgr Core tier 3 license G20 8263 Ops Mgr Core tier 3 license

(23)

IBM United States Hardware Announcement

N5300 2869 A10 8265 Ops Mgr Core tier 5 license A20 8264 Ops Mgr Core tier 4 license G10 8265 Ops Mgr Core tier 5 license G20 8264 Ops Mgr Core tier 4 license N5500 2865 A10 8265 Ops Mgr Core tier 5 license A20 8264 Ops Mgr Core tier 4 license G10 8265 Ops Mgr Core tier 5 license G20 8264 Ops Mgr Core tier 4 license N5600 2868 A10 8266 Ops Mgr Core tier 6 license A20 8265 Ops Mgr Core tier 5 license G10 8266 Ops Mgr Core tier 6 license G20 8265 Ops Mgr Core tier 5 license N7600 2866 A10 8266 Ops Mgr Core tier 6 license A20 8266 Ops Mgr Core tier 6 license G10 8266 Ops Mgr Core tier 6 license G20 8266 Ops Mgr Core tier 6 license N7700 2866 A11 8266 Ops Mgr Core tier 6 license A21 8266 Ops Mgr Core tier 6 license G11 8266 Ops Mgr Core tier 6 license G21 8266 Ops Mgr Core tier 6 license N7800 2867 A10 8267 Ops Mgr Core tier 7 license A20 8267 Ops Mgr Core tier 7 license G10 8267 Ops Mgr Core tier 7 license G20 8267 Ops Mgr Core tier 7 license N7900 2867 A11 8267 Ops Mgr Core tier 7 license A21 8267 Ops Mgr Core tier 7 license G11 8267 Ops Mgr Core tier 7 license G21 8267 Ops Mgr Core tier 7 license

For example, to use OMC to manage one N3700 Model A20, five N5200 Model A10s, and two N7800 Model G20s, you would order two of #8262, five of #8263, and four of #8267.

Op Mgr Store Resource Mgmt (#8257)

This feature provides advanced function of Operations Manager. It is designed to provide detailed storage utilization reports to aid capacity planning, consumption management, data migration, and chargeback.

This feature requires one of the OMC tier license features.

Ops Mgr Core tier 1 license (#8261)

This feature provides a license allowing use of the Operations Manager on one node of an N series tier 1 machine. One of this feature must be ordered for each node requiring a tier 1 Operations Manager license.

Ops Mgr Core tier 2 license (#8262)

This feature provides a license allowing use of the Operations Manager on one node of an N series tier 2 machine. One of this feature must be ordered for each node requiring a tier 2 Operations Manager license.

Ops Mgr Core tier 3 license (#8263)

This feature provides a license allowing use of the Operations Manager on one node of an N series tier 3 machine. One of this feature must be ordered for each node requiring a tier 3 Operations Manager license.

Figure

Updating...

References

Related subjects :