• No results found

beam length

Effect of Beam Length and Braced Length on  Moment Rotation Behavior of Castellated Beams

Effect of Beam Length and Braced Length on Moment Rotation Behavior of Castellated Beams

... of beam behav- ior during, material constitutive models, residual stresses and applied basic ...the beam ductility till ...increasing beam length increases the rotational capacity due to ...

8

Delamination localisation and length estimation in composite laminate beam by VSHM and pattern recognition methods

Delamination localisation and length estimation in composite laminate beam by VSHM and pattern recognition methods

... The question answered in this paragraph is whether localization of the position of the delamination with respect to the beam length is possible. The experimental results for the first several natural ...

14

Ductility of High Strength Concrete Heavily Steel Reinforced Members

Ductility of High Strength Concrete Heavily Steel Reinforced Members

... Six reinforced concrete beams were tested by Shari [7] and Mohammad Hasani [8] and the details are repro- duced and used. Table 1 presents the detailed testing program. Thus, for the symbols used, B and BC, letter B ...

11

Prediction of Deflection of Cantilever Beam of Any Arbitrary Length Using Soft Computation Technique

Prediction of Deflection of Cantilever Beam of Any Arbitrary Length Using Soft Computation Technique

... cantilever beam of flexible steel of rectangular cross-section, fixed at one end and free at other end with one concentrated load ...The beam is fixed to a vertical stand rod by using two nuts and bolts to ...

9

RF MEMS for Reconfigurable Antenna using GSO Algorithm with ANN

RF MEMS for Reconfigurable Antenna using GSO Algorithm with ANN

... ABSTRACT: This paper presenting the study of RF-MEMS technology which is continuously growing and MEMS for reconfigurable antenna it is very interesting and most valuable issues for optimization designing. It is ...

5

Parametric Study of the Behaviour of Reinforced Concrete Spandrel –Floor Beams

Parametric Study of the Behaviour of Reinforced Concrete Spandrel –Floor Beams

... Floor beam length should be compatible with the spandrel beam length within lf/ls ratios not more than ...floor beam since maximum deflection of the floor beam occurred due to ...

8

Analysis and Design of Thermally Actuated Micro Cantilevers for High Frequency Vibrations Using Finite Element Method

Analysis and Design of Thermally Actuated Micro Cantilevers for High Frequency Vibrations Using Finite Element Method

... actuator length and thickness would increase the tip displacement due to higher extension and stiffness of actuator (case that happens in static condi- tions and uniform temperature ...shortest length and ...

14

Faraday-rotation self-interference method for electron beam duration measurement in the laser wakefield accelerator

Faraday-rotation self-interference method for electron beam duration measurement in the laser wakefield accelerator

... and beam charge; others are completely beyond these methods’ ...electron beam duration is important for its application in obtaining ultrashort and high brilliant X-ray ...electron beam duration is ...

11

Flexural Behaviour of Notched Steel Beams Repaired with FRP Plates: Parametric Studies

Flexural Behaviour of Notched Steel Beams Repaired with FRP Plates: Parametric Studies

... shows beam conguration as well as FE modeling of simulated ...steel beam FC1F1 in which the beam eventually failed by rupturing in CFRP plate, while its corresponding beam in experimental ...

12

Using paraxial approximation to describe the optical setup of a typical EARLINET lidar system

Using paraxial approximation to describe the optical setup of a typical EARLINET lidar system

... laser beam divergence respectively (half ...laser beam diameter (DL), as if the laser was not tilted, and the distance between the laser telescope central axes (DTL) at the back of the laser and ...

13

Influence length
of single-beam propagation in doped glass and polymer optical fibres 

Influence length of single-beam propagation in doped glass and polymer optical fibres 

... Optical fibre lasers and amplifiers made as doped optical fibres (DOFs) have many practical applications in industries and medicine. A number of characteristics of DOFs should be determined prior to designing these ...

9

Synthesis of Optimal Narrow Beam Low Sidelobe Linear Array with Constrained Length

Synthesis of Optimal Narrow Beam Low Sidelobe Linear Array with Constrained Length

... Abstract—The synthesis of optimal narrow beam low sidelobe linear array is addressed. Only the length of the array is constrained. The number, the positions and the weightings of the elements are left free. ...

16

Design AIDS for Beam Column Design as per IS 800:2007

Design AIDS for Beam Column Design as per IS 800:2007

... extensively in various types of structures, such as high rise building, industrial building etc. The new code IS800:2007 is used for design of steel members. This new code include variety of elements like compression ...

7

A 3D microrobotic actuator for micro and nano manipulation

A 3D microrobotic actuator for micro and nano manipulation

... spring beam lengths extending as high as 1.8 mm. An advanced design of the stage, shown in Figure 3.1a is reported by the same group that can achieve an out-of-plane motion of 7 μm at a driving voltage of 4.5 V ...

332

Estimators and Confidence Intervals for Plant Area Density at Voxel Scale with T-LiDAR

Estimators and Confidence Intervals for Plant Area Density at Voxel Scale with T-LiDAR

... accounts for unequal path length, element size and beam number and extended definition when I=1. 715[r] ...

72

A compact instrument for adjusting laser beams to be accurately coincident and coaxial and its use in biomedical imaging using wave-mixed laser sources

A compact instrument for adjusting laser beams to be accurately coincident and coaxial and its use in biomedical imaging using wave-mixed laser sources

... either beam, making it highly useful both for initial alignment setting and periodic ...the beam path altered the beam profiles thereby leading to erroneous alignment, we measured the beam ...

6

Electromagnetic modelling of dielectric loaded aperiodic gyrotron beam tunnels

Electromagnetic modelling of dielectric loaded aperiodic gyrotron beam tunnels

... Since our new model treats the beam tunnel structure as finite, the foundation has been set for further enhancements of the model, to consider even more realistic structures. First of all, instead of external ...

6

The Effect of CFRP Laminate Length for Strengthening the Tension Zone of the Reinforced Concrete T-Beam

The Effect of CFRP Laminate Length for Strengthening the Tension Zone of the Reinforced Concrete T-Beam

... the length of the strengthening ...The length of the CFRP laminate recommended in the Technical Report 55 did not prevent end peeling but it did increase the load bearing capacity of the RC ...

16

IJCEE Vol 17 Issue 04

IJCEE Vol 17 Issue 04

... Abstract-- Within the last three decades, the applications of externally bonded Fiber Reinforced Polymer (FRP) systems in the strengthening of concrete structures has been rapidly growing. Debonding between FRP laminates ...

11

Effect of beam depth on shear behavior of FRP RC beams

Effect of beam depth on shear behavior of FRP RC beams

... The main results obtained in the experimental program are summarized in Table 4. All beams exhibited a brittle diagonal tension shear failure caused by the development of diagonal cracks (Fig. 4).The shear cracks ...

40

Show all 10000 documents...

Related subjects