• No results found

Carbon Nano Tube

Experimental Design of a Ternary Full Adder using Pseudo N type Carbon Nano tube FETs

Experimental Design of a Ternary Full Adder using Pseudo N type Carbon Nano tube FETs

... an arithmetic circuit. Increasing the level of logic in an Adder circuit results in more efficiency as it can compute larger numbers with greater accuracy. In this paper a ternary adder is designed with ternary logic. ...

7

Effect of Nano Carbon and Resins with Magnesia on Formation of Multi Walled Carbon Nano Tube

Effect of Nano Carbon and Resins with Magnesia on Formation of Multi Walled Carbon Nano Tube

... of carbon nanotube around 26.4⁰. The peaks of graphite and carbon nanotube occur at the same 2-theta ...amorphous carbon (carbon black) along with the binder resulted in the formation of ...

8

Multi-Parameter Analysis and Modeling of MRR & SR on Electro Discharge Machine with Multi Wall Carbon Nano Tube

Multi-Parameter Analysis and Modeling of MRR & SR on Electro Discharge Machine with Multi Wall Carbon Nano Tube

... Process parameters do not have same effect for every response. Significant parameters and its percentage contribution changes as per the behavior of the parameter with objective response Finding the result of MRR the ...

9

THERMAL, MECHANICAL AND STRUCTURAL PROPERTIES EVALUATION OF CARBON NANO TUBE BASED ALUMINIUM MATRIX COMPOSITE

THERMAL, MECHANICAL AND STRUCTURAL PROPERTIES EVALUATION OF CARBON NANO TUBE BASED ALUMINIUM MATRIX COMPOSITE

... of carbon nano tube (CNT) metal matrix composites ...techniques, nano tube dispersion, interface, strengthening mechanisms and mechanical ...

9

Composite Multi Wall Carbon Nano Tube Polydimethylsiloxane Membrane Bioreactor for Enhanced Bioethanol Production from Broomcorn Seeds

Composite Multi Wall Carbon Nano Tube Polydimethylsiloxane Membrane Bioreactor for Enhanced Bioethanol Production from Broomcorn Seeds

... Broomcorn seed (Sorghum vulgare) was used as raw material for bioethanol production. Optimum conditions were obtained from response surface method. Broomcorn seed flour (45 g/l) was treated by alkaline treatment and dual ...

8

Electrochemical Properties of Cellulose-nano-fiber/Reduced graphene oxide/Carbon-nano-tube Aerogel

Electrochemical Properties of Cellulose-nano-fiber/Reduced graphene oxide/Carbon-nano-tube Aerogel

... porous carbon materials have been widely used in super- capacitor electrode materials [3, ...4]. Carbon-nano-tube (CNTs) is a hollow columnar nanomaterial with great electrical conductivity, ...

13

The Effect of Carbon Nano-tube on the Fatigue Life of Asphalt Mixtures

The Effect of Carbon Nano-tube on the Fatigue Life of Asphalt Mixtures

... with Carbon Nano-tube with ultrasonic ...of Carbon Nano-tube (CNT) by combining sonication, high shear and mechanical mixing techniques to achieve the highest degree of ...and ...

16

Self propagating high temperature synthesis of nano TiCx
               particles with different shapes by using carbon nano tube as C source

Self propagating high temperature synthesis of nano TiCx particles with different shapes by using carbon nano tube as C source

... the carbon source and decrease the activation energy of the SHS reac- ...them, carbon nano-tube (CNT) has much finer size, usually 5 to 20 nm in dia- ...

7

High Performance NP Dynamic Adder Circuit with Carbon NANO Tube Technology
B Raju & K Madhava Rao

High Performance NP Dynamic Adder Circuit with Carbon NANO Tube Technology B Raju & K Madhava Rao

... The carbon nanotubes (CNs) are heavily doped with do- nors (for n-channel) or acceptors (for p-channel) in the source and drain extension regions of a ...The carbon nanotubes are undoped under the gate. ...

10

Physicomechanical Characteristic of Slag Geopolymer Mortar Enhanced with Multiwall Carbon Nano-tube

Physicomechanical Characteristic of Slag Geopolymer Mortar Enhanced with Multiwall Carbon Nano-tube

... diameter ratio) ranging from 30 to more than many thousands. They are expected to produce significantly stronger and tougher cement composites than traditional reinforcing materials (e.g. glass fibers or carbon ...

9

Study of Corrosion properties of micro titanium and carbon nano tube reinforced in copper based metal matrix composites

Study of Corrosion properties of micro titanium and carbon nano tube reinforced in copper based metal matrix composites

... Study of corrosion behavior of such composites is very much necessary as they often come in contact with acid during cleaning, pickling, descaling, etc. Corrosion resistance of metal matrix composites depend largely on ...

8

Study and Analyze of Wear Behavior Carbon Nano Tube Epoxy Resin Composite Material

Study and Analyze of Wear Behavior Carbon Nano Tube Epoxy Resin Composite Material

... Abstract: Composite materials are the answer to most of mankind’s engineering needs. They offer better structural and mechanical properties than any conventional materials like metals, alloys, plastics and polymers. They ...

10

Improvement of Mechanical and Physical Property of Polypropylene Nano Composites by the Addition of Multi-walled Carbon Nano Tube

Improvement of Mechanical and Physical Property of Polypropylene Nano Composites by the Addition of Multi-walled Carbon Nano Tube

... of carbon nanotubes deposited by methane Sedimentation at a temperature 1000° after the purification stage with different magnifications are shown in Figures 1 and ...

7

Modeling CNT Interfaces Using NEGF Approach

Modeling CNT Interfaces Using NEGF Approach

... of carbon nano tube for measuring stress and temperature as well as in SWCNT can be used for wide range applications in design of a versatile nanoscale ...

5

Vibratory Analysis of a Doubly Clamped Wavy Single Walled Carbon Nanotube based Nano Mechanical Sensors

Vibratory Analysis of a Doubly Clamped Wavy Single Walled Carbon Nanotube based Nano Mechanical Sensors

... walled carbon nano tube (SWCNT) with waviness along its axis which is doubly clamped at a source and a drain and is used to represent a single mode resonator has been ...of carbon nanotubes ...

8

LINEAR FREE VIBRATIONS OF FG- CNTRC H-H BEAMS USING SLENDER BEAM THEORY

LINEAR FREE VIBRATIONS OF FG- CNTRC H-H BEAMS USING SLENDER BEAM THEORY

... This thesis investigates the linear free vibrations of functionally graded Carbon Nano-tube reinforced Composite (FG-CNTRC) beams using Slender (Euler-Bernoulli’s) beam theory. The material ...

8

Designing and Simulating a New Full Adder with Low Power Consumption

Designing and Simulating a New Full Adder with Low Power Consumption

... A new full adder cell with optimal performance and by Carbon Nano-tube technology was introduced in this study. The main idea of the present paper was to use the Pass Transistors in order to achieve ...

12

Nonlinear Dynamic Response of Nano-composite Sandwich Annular Spherical Shells

Nonlinear Dynamic Response of Nano-composite Sandwich Annular Spherical Shells

... graded carbon nano-tube reinforced composite, but there isn’t publication that research nonlinear dynamic response of FG-CNTRCs sandwich annular spherical shell on elastic foundation subjected to ...

13

Fluoxetine Determination by PVC membrane and Nano-Composite Carbon Paste Electrodes

Fluoxetine Determination by PVC membrane and Nano-Composite Carbon Paste Electrodes

... a nano-composite carbon paste electrode was designed to improve the analytical ...The carbon paste electrode incorporation of multi-walled carbon nano-tube (MWCNTs) and ...

13

Molecular Dynamics Simulation of Water in Single WallCarbon Nanotube

Molecular Dynamics Simulation of Water in Single WallCarbon Nanotube

... In this study some physical and transport properties of water molecules inside the single wall carbon nano tube were calculated using molecular dynamics simulation. Radial density of water molecules ...

10

Show all 10000 documents...

Related subjects