• No results found

fracture properties

A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite

A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite

... determine fracture properties in these three modes, such as Double Contilever Beam (DCB), End Notch Flexure (ENF), End Load Split (ELS), Mixed-mode Bending (MMB), and Arcan ...I fracture has been ...

14

Effect of Temperature and Time on the Fracture Properties of Heated Concrete

Effect of Temperature and Time on the Fracture Properties of Heated Concrete

... the fracture toughness of ...the fracture properties of concrete using such large specimens, the effect of their own weight cannot be ...their fracture properties relatively stronger ...

9

Effect of Micro-scale Y Addition on the Fracture Properties of Al–Cu–Mn Alloy

Effect of Micro-scale Y Addition on the Fracture Properties of Al–Cu–Mn Alloy

... The rest of the RE Y element and inter-metallic com- pound AlCuY aggregates at GBs to greatly increase micro-segregation. These changes reduce the continuity of micro-structures. Tensile strength and ability of plas- tic ...

11

A study of fracture properties of high alumina shielding concrete (hasc)

A study of fracture properties of high alumina shielding concrete (hasc)

... and fracture properties of heavy concrete. A fracture process zone exists in front of the tip of a propagating ...Hillerburg’s fracture model (1985), Bazant’s size effect model (1986), Jenq ...

10

The effect of humidity on the fracture properties of human fingernails

The effect of humidity on the fracture properties of human fingernails

... Cutting tests for estimating the fracture properties of plant and animal tissue (Eichhorn et al., 2007; Farren et al., 2004; Lucas and Pereira, 1990; Vincent, 1992) have usually involved placing a pair of ...

5

Experimental estimation of the mechanical and fracture properties of a new epoxy adhesive

Experimental estimation of the mechanical and fracture properties of a new epoxy adhesive

... the fracture properties, where there are significant improvements to be ...I fracture behav- ior of a self-healing toughened adhesive by the TDCB ...

17

Evaluation on the Fracture Properties of Concrete Subjected to High Temperature Heating

Evaluation on the Fracture Properties of Concrete Subjected to High Temperature Heating

... Fracture properties were evaluated based on tension-softening curves, which were determined by polylinear approximation through inverse analysis of load versus crack mouth opening displacement (CMOD) curves ...

10

Evaluation on the Fracture Properties of Heated Concrete by Using Poly-linear Tension Softening Inverse Analysis

Evaluation on the Fracture Properties of Heated Concrete by Using Poly-linear Tension Softening Inverse Analysis

... Concrete structures for nuclear power generation may be subjected to heating action for a long period. Many studies have already reported that the strength of concrete subjected to heating can be retained by maintaining ...

9

Experimental investigation of quasistatic and dynamic fracture properties of titanium alloys

Experimental investigation of quasistatic and dynamic fracture properties of titanium alloys

... loaded Homalite-100 fracture properties were studied using the optical method of caustics by Ravi- Chandar and Knauss [37]. Dynamic crack initiation in PMMA was studied by Rittel and Maigre [30], [40], [39] ...

134

Fracture properties in dissimilar metal weld junctions: methodology of characterization

Fracture properties in dissimilar metal weld junctions: methodology of characterization

... and fracture surfaces both sides FS or SS: comparison between crack propagations of 4mm in fusion line mostly in FS (AI), and of 2mm mainly in Inconel ...on fracture specimens using Single-Specimen ...

10

Fracture Properties of Mixed Mode Steel Fibre Reinforced Concrete

Fracture Properties of Mixed Mode Steel Fibre Reinforced Concrete

... D. It is also observed that, graph Kc vs off-set the result of Plain concrete, SFRC1 and SFRC2 the value of total conventional Fracture Toughness Kc increase with increase off-set except in case of plain concrete ...

6

Fracture Properties of Mode II for High Strength Concrete

Fracture Properties of Mode II for High Strength Concrete

... applying fracture mechanics theory to concrete materials is the effect of slow crack growth that may take place during testing (an elastic – plastic analysis may be ...

5

Deformation and fracture properties of dark chocolate

Deformation and fracture properties of dark chocolate

... Series of mechanical tests (uniaxial compression test, Brasil test, plate bending test) with cylidrical specimens made from dark chocolate have been performed. The stress-strain dependence has been ploted and modeled ...

8

A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

... equal fracture properties as that of the matrix and the particle) results in a higher overall strength of the specimen as compared to the other responses corresponding to lower interface ...

21

Effect of strain rates on tensile properties and fracture toughness determination of extruded Mg Al Zn alloys

Effect of strain rates on tensile properties and fracture toughness determination of extruded Mg Al Zn alloys

... mechanical properties of magnesium alloys under impact response are required to refer prior to applying the potential magnesium alloys in automotive ...impact fracture properties to understand the ...

56

The Effect Zeolite Addition in Natural Rubber Polypropylene Composite on  Mechanical, Structure, and Thermal Characteristics

The Effect Zeolite Addition in Natural Rubber Polypropylene Composite on Mechanical, Structure, and Thermal Characteristics

... these properties, zeolite is considered as good reinforcing agent for improving mechanical and thermal properties organic ...these properties, it is then expected that addition of zeolite will ...

8

Tensile Properties and Gamma Precipitates in Grain Boundaries of Nickel Alloys

Tensile Properties and Gamma Precipitates in Grain Boundaries of Nickel Alloys

... tensile properties of the three alloys annealed for 1 hour were essentially identical to the properties of the alloys annealed at 1000C o for 2 and 4 ...tensile properties of these ...

5

Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites

Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites

... of fracture toughness J2027 (Brendon Chemical) specimens filled with varying weight percentages of E-spheres ...the fracture toughness is highest with the neat resin and was ...the fracture toughness ...

24

Silicon Carbide, Blf and Aluminium Metal Matrix Composites for Aerospace Applications

Silicon Carbide, Blf and Aluminium Metal Matrix Composites for Aerospace Applications

... Although the previous section briefly discussed some of the properties of Al-SiC, the composites exact set of properties depend on a number of factors. Apart from the changes in microstructure of matrix and ...

8

PDF

PDF

... CONCLUSIONS The mechanical properties Hardness, ductility, yield stress, and fracture toughness and the ultrasonic attenuation in INCONEL 718 are anisotropic.. The anisotropy parameter K[r] ...

7

Show all 10000 documents...

Related subjects