Grooved tube
Numerical investigation on turbulent forced convection and heat transfer characteristic in spirally semicircle-grooved tube
... the grooved depth, e = 1.5 mm and grooved pitch, p = ...smooth tube, ...corrugated tube with the depth of corrugation, e = ...corrugated tube has a significant effect on condensation ...
15
CFD Modeling of Liquid solid Flow in a New Internal Spiral Grooved Tube
... spiral-grooved tube is widely used in chemical heat exchanger industry, especially for enhancing heat transfer in the heat ...grooves tube [1-3], and single-phase flow and heat transfer was mainly ...
7
Investigation of Heat Transfer in Helically Grooved Pipe Using Cfd
... inner grooved tube was designed with SolidWorks software and the grid was generated with GAMBIT ...copper tube for two different purposes: condensation and ...enhanced tube in comparison with ...
13
Heat Transfer Enhancement in Helix Exchanger Using Grooved Tubes At Different Baffle Angles
... of grooved tube helix exchanger with different helical baffle angles was done and the influence of Reynolds number, hot water inlet temperature on the heat transfer rate and on overall heat transfer ...
8
Heat Transfer Enhancement in Circular Wavy Grooved Surface Tube Using Alumina Water Nanofluid
... result showed that heat transfer increases with the concentration of the particle. Firoz Rangrez & Prof. S.H.Kulkarni, [4], 2014, investigated the CFD Analysis of Air-Cooled Heat Exchanger Using Reduced Diameter ...
9
SKER HUESKER HUESKER HUESKER HUESKER HUESKERHUES SKER HUESKER HUESKER HUESKER HUESKER HUESKERHUES SKER HUESKER HUESKER HUESKER HUESKER HUESKERHUES
... Open front system designed primarily for opening and closing large areas. Conceived for eaves heights of up to 5.00 m. The hanging is wound onto an aluminium grooved tube by an electric drive unit. Bracing ...
12
Numerical Analysis of the Physical Properties of the Flow of Molten Polymers in Grooved Profiles
... finite tube, represented in Figure 2(b), use the same variables, boundary conditions and considerations to evaluate the influence of the fins in the fluid ...
12
Gain Enhancement of Slot Antenna Using Grooved Structure and FSS Layer
... In this work, we are interested in developing a high-gain antenna for radar-based non-contact measurement system in the K-band frequency range. This antenna will be integrated into a real- time wireless monitoring system ...
7
Comparative Study on Tube in Tube Structures and Tubed Mega Frames
... the tube in tube structure is modelled with different positioning of the internal tube model B1 with center tube, model B2 with edge tube, model B3 with inner ...the tube in ...
8
Heat Transfer Analysis on Helical - Grooved Horizontal Small - Diameter Tubes
... other. Tube in tube helical curl warm exchanger furnishes a smaller shape with its geometry offering more liquid contact and taking out the no man's land, expanding the turbulence and thus the heat exchange ...
9
Tube Fabricating Equipment
... six tube sizes 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2 ...thickness tube. Simply align marks on slide block and radius block then bend tube to desired angle (up to 180°) by pulling steadily on slide block ...
14
Comparative Study of Tube in Tube Structure and Frame Tube Structure
... buildings. Tube structures are particularly suitable for all tall ...Frame Tube Structure and Tube in Tube Structure are modeled and compared with the conventional moment resisting frame ...of ...
6
Heat Transfer Analysis in Light Passenger Car Radiator with Various Geometrical Configurations
... of tube and fin helps us in limiting the computational domain to a four tube and adjoining fin ...and tube assembly and design analysis is carried ...the tube and fin also to be ...
8
Analysis of Tube Failure in Water Tube boiler
... reduced tube failure due to flue gas erosion. The usage of sanicro 25 as tube material for boiler tubes provides extended tube life due to its better creep strength and this reduces the failure rate ...
16
Comparative Study Of Axial Heat Conduction On The Walls Of A Micro Grooved Heat Pipe
... interface is considered. It has been reported by Ma and Peterson [7] that for triangular grooved chan-nels, the heat transfer coefficient for heat exchange with the boiling liquid over CD could vary typically in ...
8
Experimental Investigation of U tube heat exchanger using Plain tube and Corrugated tube
... corrugated tube and volumetric flow rate on the heat transfer coefficient is ...and tube side. They compared result obtain from corrugated tube heat exchanger with smooth tube heat ...
6
Dynamic Analysis of Tube In Tube Tall Buildings
... 2) It is also assumed that both beams and columns are of uniform section throughout the height of the building. 3) The floor slabs are considered as rigid diaphragms in their own plane so that the relative displacements ...
6
Investigation of the thermo-hydraulic behavior of the fluid flow over a square ribbed channel
... boundary layers along the top of the rib (0.5 < /H < 1.5) and along the front flank that cause high local and global heat transfer rates on the grooved wall. The Nusselt number distribution along the top of ...
9
Enhancement Of Air Swirl In A Diesel Engine With Grooved Cylinder Head
... This investigation leads to improvement in performance, combustion and emission characteristics of a D.I diesel engine through methods enabling improvement in igniti[r] ...
6
Nonglandular Trichomes of Californian and Hawaiian Tarweeds
... The ecology and growth form of the plants in each group were compared to the trichome surface structure.. Ecologically, members of the grooved group were alike in experienci[r] ...
13