High-rise building design
Perception of triangulated structure system in high rise building design
... By using space triangle frame as a mega structure system we can delete column in our architecture and by combination of this space frame modules we can design fractal forms and shape. There are three main factors ...
23
Effect Of Using High Strength Concrete Columns On The Structural Behavior Of Building Frames
... and design in the construction ...cases. High strength concrete (HSC) has been used in the lower story columns of high rise buildings owing to its qualities over normal strength concrete (NSC) ...
7
Validation of Wind Pressure on Multi-Storied Building by Using CFD Simulation and Shape Optimization
... Multi-Storied building design, needs to be carried out with at most ...wind design codes have their own limitations in providing necessary guidelines for the wind designing, such as height limits of ...
11
Analysis and design of curtain wall systems for high rise buildings
... a building that distinguish one building from ...new high-rise buildings, it becomes a major investment in both construction and long-term success of the ...the design and analysis of ...
108
Effect Of Piled Raft Design On High-Rise Building Considering Soil Structure Interaction
... To study the contribution of pile length configurations with different soils on the behavior of building considering SSI, the parametric study with various soil types is done. The plan of the building with ...
8
Seismic Analysis and Design of Structural Lightweight Concrete High Rise Building with and Without Retrofitting
... a building is directly proportional to its stiffness and inversely proportional to the square root of mass, So, if we can significantly reduce the building mass, the natural frequency of the structure will ...
5
Escape routes design specification analysis for optimum evacuation of 200 people in high-rise building
... the building occupants by helping them in the evacuation ...the building specifications can be changed more ...residential building (Yatim and Harris, 2007). In this regard, the building ...
17
Optimum Structural Design for High Rise Building
... for high rise ...optimum design for high rise ...typical building plan with same loading cases is analyzed for 7 different structural ...
5
Analysis of High Rise Building with Transfer Floor
... in high rise buildings and in mega tall structures with the advanced and powerful structural ...the high-rise buildings with columns may have different arrangement system between floor levels ...
6
FRAGILITY ANALYSIS OF HIGH-RISE BUILDING STRUCTURE
... In this study the development fragility functions for Reinforced Concrete (RC) building is presented. Fragility functions provide probability of exceeding a prescribed level of damage for wide range ground motion ...
7
Download Download PDF
... of high-rise buildings for adaptation in Nigeria and other countries with similar earth tremor data is carried out in this work using the linear static (lateral force) ...studied building model ...
6
Prefabricated Hybrid Wall Panel System for Lightweight Steel Construction in Seismic Prone Regions
... resist high cyclic ...the design of a mid-rise building in a high seismic area, the performance of the hybrid panels, are compared with those of fully hot- rolled systems (moment ...
16
Interdisciplinary design study of a high-rise integrated roof wind energy system
... The application of IRWES introduces additional loads to the existing bearing structure of the building. The static load increases because of its dead loads (DL). Likewise, the horizontal wind forces will increase ...
8
Bioclimatic Technology in High Rise Office Building Design: A Comparison Study for Indoor Environmental Condition
... of high-rise buildings in the capital city of Kuala Lumpur and other major cities such as Penang and Shah ...approach design for high-rise buildings was introduced and implemented by a ...
16
High Rise Residential Reinforced Concrete Building Optimisation
... Once the floor system is optimised, the original model shall be updated and restudied, in that case, for the up- per structure (lateral resisting load system) I selected the commercial software ETABS 2014 to analyse and ...
14
Investigation of Maintenance and Cost Control for High Rise Building
... Flow chart of the research design giving an indication to an area of equipment or process that requires further investigation. FMEA can identify possible failure modes and the effects on the system but can also ...
12
PARAMETRIC ANALYSIS OF DRAG ON ORIENTATION OF HIGH RISE BUILDING.
... in design of most major tall buildings to identify the wind induced structural loads and responses for which the superstructure has to be ...to design according to local conditions ...
10
Time Impact of Scheduling Simulation for High Rise Building
... During design stage commonly, town planners, architects and designer’s work independently with little input and communication with each other, past experience from previous project is not considered during this ...
9
Evaluation of Coupled Shear Wall in High Rise Building
... In multi-storey buildings, the lateral loads are resisted by shear walls due to their strength and stiffness. These walls have several openings such as windows, doors, elevators etc. which divide the whole shear wall ...
5
Assessment Of Bim In High-Rise Building Construction In Indonesia
... a building during its life cycle in digital ...visualising building construction, has real-time facilities, and dynamic building modelling to improve productivity in building design and ...
6