Industrial engineers (IEs) apply science, mathematics, and engineering methods to complex system integration and operations. Because these systems are so large and complex, IEs need to have knowledge and skills in a wide variety of disciplines, the ability to work well with people, and a broad, systems perspective. Industrial engineers use their knowledge and skills to improve systematic processes through the use of statistical analysis, interpersonal communication, design, planning, quality control, operations management, computer simulation, and problem solving. It eliminates waste of time, money, materials, energy and other resources. Industrial Engineering is also known as Operations management, Production Engineering, or Manufacturing Engineering depending on the viewpoint or motives of the user. In lean manufacturing systems, Industrial engineers work to eliminate wastage of time, money, materials, energy, and other resources
22 Read more
Over the past decades significant amounts of pollutants from various industrial sourceshave been released into the atmosphere. There has been an increase in a variety of problems like smog formation, acid rain, odour nuisance, greenhouse effect and health impactsdue to highrelease of air pollutants. These xenobiotic compounds are removed slowly and have tendency to accumulate in the environment.With growing public awareness in health aspects and environmental impact, strict rulesare being enforced on the industries to restrain the air pollutants. There are different technologies to control the volatile organic compounds (VOCs) emission, but these are not applicable everywhere. Table 1 compares the various availabletechnologies to control VOCs emission. All technologies are applicable depending upon the type, source and concentration of the VOCs. The traditional VOCs removal techniques such as adsorption, absorption, condensation, thermal incinerationand some recent methods such as electronic coagulation, membrane separationare very efficientbut they produce unwanted byproducts. These are expensive and energy intensive techniques for the treatment of polluted air stream. Compare to these techniques biological treatment is an attractive option for low concentration gas streams because it requires low energy consumption,moderate operating cost and minimum by-product generation.There are different biological treatment methods which include biofilters, membrane bioreactors, bio-trickling filters and bioscrubbers. The basic pollutant removal technique of all the treatments is more or less similar, difference exists in the use of micro-organisms(may be either suspended in liquid) or immobilized(biofilm form), packing media and pollutant concentration(Sandeep Mundaliar et al.,2010).
energy to produce or to amplify a wide variety of methods have been investigated. At industrial level, ultrasound was being using for the study of inspection and characterization of different materials. Ultrasonic technique can not applied only to inspect bulk and surface flaws but also finding the information on material microstructures. Ultrasonic technique provides the interaction of high frequency sound wave with matter resulting to generation of information about physico-chemical properties. Ultrasound is a very useful and flexible modality in medical imaging that uses high-frequency sound waves to characterize tissue. Although, during the last decades ultrasonic technology developed new techniques to represent a clean and effective tool to refine classical existing techniques. Some techniques look like to be the case of pertinent sectors such as environment, food industry, pharmaceuticals, machinery mining, chemicals manufacture etc. Many researchers have been studies the application of ultrasonic waves in different areas like medicines, oceanography, aerospace, navy and material science. Nowadays Ultrasonics became a multidimensional area of study due to its different industrial and medical field. The possibilities and limitations of ultrasonics for these purposes are discussed.
The direct model-to-part architecture was implemented on a Single Axis Lathe using a PC to control the machine. The controller uses the computer’s graphics hardware to assist in computing tool positions in real-time and to maintain a Live Model simulation of the motion of the tool and workpiece during cutting. Machining experiments showed the system to be reasonably accurate, though the machine was not constructed to high tolerances. The helical tool path limitation of the Single Axis Lathe will be eliminated by the construction of a 4-Axis Router machine. The 4-Axis Router will be the basis upon which the direct model-topart architecture will be expanded to machine industrial parts.
Aeronautics in this paper was only a pretext in order for the reader to better grasp the ideas which are developed, given the recent events concerning the B737 Max. But the method described is applicable to all sectors, as much industrial (cars, trains, ships…) as the service area (banks, insurance companies, universities, science…). The method described allows detecting when we, as a competitor in a field, need to change paradigm under the threat that if we do not do it, we shall fail. The method consists in a simulation, with a whole team. This is kind of huge work, but it is worth the trouble. If, by chance, we have a slightly more advanced concept than the competitors, then there is a possibility to use the same method in order to disrupt the market and force the competitors to the corner.
IoTs is numerous usefulness of IoT applications into all the do mains in clud ing medica l, industrial, manufacturing, transportation, education, governance, mining, habitat etc. However, IoT has rich its benefits, there are some flaws in the IoT imple mentation level and governance. The key observations to IoTs are that (1) Worldwide there is no standard definition (2) in architectural level universal standardizations are required (3) For better global governance, we require to build standard protocols.
Though entrepreneurs face many problems and challenges in their path of becoming a successful entrepreneur but the government has taken many initiatives for their growth. MSMEs “form the backbone of our Economy”. They account for a large portion of our industrial output and employment. The project concludes with the recommendation to the Indian Banking industry to enhance its share of finance to MSME sector, through lending either directly or indirectly, in order to ensure further improvements in their contributions to the economy – in terms of jobs creation, export potential, and better standard of living to millions of families. . Finally, it can be said that there is a long way to go for entrepreneurs and MSMEs in Villupuram and their success is the success of Indian economy.
IJEDR1904055 International Journal of Engineering Development and Research (www.ijedr.org) 310 (12) respectively. Here, ρ + δρ(r, t) denotes the mass density with its mean value ρ and its (small) fluctuations δρ(r, t) at the position r in space and the time t. v = v(r, t) is the fluid velocity field, f(r, t) a volume force, and σ(r, t) the stress tensor. Note that only the mean density ρ will appear throughout the rest of the paper.
IJEDR1904068 International Journal of Engineering Development and Research (www.ijedr.org) 389 The enhancement of the System Architecture and reduction in the size of the module and implementation of the more number of the sensors in the module and the efficinent usage of the batteries and the replacing GSM with the wifi Module ESP8266 can be help the project with the efficient monitering of the patient and the efficient usage of the batteries can be achieved.
CAD is not only important in the field of architecture or mechanical engineering sector, but also very crucial in the area of graphic design, fashion design, toy design, packaging, computer gaming and movies. In most of the above highly sophisticated and fashionable sectors, CAD has been proven its vitality as an integrated part of digitisation with high clarity as well as output. CAD is a true asset for architects who are interested to have a robust career in any domain. The CAD system capable of making your work more easier and faster by removing the repetitive works, which not only faster the speed of the work, but also mitigate the stress upon the designer to lot extent due to repetitive works. Furthermore CAD system is the effective way for reducing the errors in design & drawings with high accuracy and quick turnaround time. Now days many CAD design & drafting companies are providing complete project management to serve the entire residential and commercial design need of the architects and engineers. THE FRACTAL GEOMETRY
The authors have proposed mux design to multiplex multiple inputs to single output but not multiple logic families. They have also not done research experimentation on how to use mux to automatically provide corresponding pull up & pull downs for several logic families to be assigned any IOB of FPGA or IO of ASIC or ASSP. Also the authors have not spoken anything on usage of user constraint file or IO banks for assigning any IOB to any of the several logic families to provide IO standard interface.
 Jan Schuren, Kay Mohr (2008), Pascal's law and the dynamics of compression therapy: a study on healthy volunteers.  P.S. Rana, P.H. Belge, N.A. Nagrare, C.A. Padwad, P.R. Daga, K.B. Deshbhratar, N.K. Mandavgade, (2012), Integrated Automated Jacks for 4-wheelers, European Journal of Applied Engineering and Scientific Research, 2012, 1 (4):167-172  Mohammed Abuzaid, Mohammad Hasnain, Shabaj Alam, Sohail khan, Prof. Surendra Agarwal, (2013), International Journal of Innovations in Engineering and Technology, Vol 2 Issue 2 Pg. 76-84
The later investigations for 5G versatile correspondences frameworks show that those utilization of little phones so as will accomplish the broadband benefits to versatile apparatuses. 5G framework will be absorption on college advice rates, l ow ascendancy consumption, all-inclusive cardinal of associated devices, accessory portability applications, along low cessation accoutrement additionally assorted with absolute 4G framework. Should attain these targets, those absolute innovations recommended beneath the 4G structural engineering needs the accepted shift. Thus, the innovations along strategies such as huge Multiple Input Multiple Output (MIMO), accessory to accessory communications, use from claiming college ceremony bands, additionally affective networks charge aid talked about. Practically every last one of innovations for need aid focusing on network centric construction modeling but the idea from claiming moving networks. The moving networks need aid focusing on the user centric system on gatherings give same user experience all over. Moreover, exactly of the could reasonably be expected advances furthermore standardizations patterns to 5G. The mPC need the preference of giving the scope development in the event of altered units. To addition, the mPC could furnish benefits in multihop D2D interchanges in the event from claiming catastrophe circumstances furthermore will be great suiting for web from claiming things due to its proficience on furnish low inactivity . 5th era remote systems, or 5G, need aid the following era portable remote telecommunications past the current 4G/international versatile telecommunications advanced frameworks. 5G remote framework may be not main a advancement of the legacy 4G cell division networks, as well as an arrangement for huge numbers new administration abilities [2
IJEDR1701019 International Journal of Engineering Development and Research (www.ijedr.org) 123 Using IO trigger for at least 10us high level signal. The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back. If the signal back, through high level, time of high output IO duration is the time from sending ultrasonic to returning.
13 Read more
related factors are threatening food security situation of the area. Although the initiation of farmer’s traditional surface irrigation practice is appreciated, it is not in a position to provide sustainable supply source and effective utilization of water. Therefore, the development of Nanno Small Scale Irrigation Project diversion irrigation is expected to contribute towards alleviating these problems thereby increasing food supply and income source to the community and also at local and regional levels (Ebissa G. K. et al 2017). Fortunately, Ethiopia is lucky in that it has got ample source of surface and subsurface water for which it is known as “The Water Tower of East Africa.” Moreover; the irrigation potential is estimated to be about 4.25 million hectare of which only 5.8% is irrigated.(source: Study carried out by International Water Management Institute-IWMI). Nowadays, implementation of small and medium scale irrigation schemes is being given priority in the water sector development strategy of Ethiopia.
29 Read more
It can entice to sum up while considering the contrasts between men, ladies, and the different routes in which they express their feelings; men and ladies from different societies have been appeared to acknowledge the generalization that ladies are more enthusiastic than men. Normally, this point of view on men is just held in instances of discrete feelings and their relating expressions, for example, bliss, dread, sicken, or pity. At the point when men encounter pride or outrage, nonetheless, the vast majority are considerably less liable to accept this generalization. Leaving sexual orientation generalizations unchallenged would have different potential results. The conviction that ladies are more enthusiastic than men addresses our comprehension of passionate reactivity and direction frameworks. Besides, this presumption can impactsly affect the way we collaborate with each other and our general public on the loose. Hence, a developing division of current brain science research is committed to the basic examination of these generalizations Numerous analysts have inferred that the watched passionate contrasts amongst men and ladies principally come from mingled sexual orientation parts, as opposed to science. Consequently, the scope of enthusiastic expression that specific populaces experience is based, in expansive part, on their way of life's desires for gentility and manliness.
10 Read more
Most of the amorphous carbon and fullerenes are removed by gas phase oxidation . Fullerenes can also be removed with toluene because they are soluble in the solvent . Then the carbon nantubes are treated by acids such as HCl , HNO3 , and H2SO4–HNO3 mixtures  to remove catalytic metals and residual amorphous carbon. The carbon nanotubes are recovered by centrifugation or filtration after acid treatments. From the viewpoint of production engineering filtration is superior to
IJEDR1702258 International Journal of Engineering Development and Research (www.ijedr.org) 1654 This dash board shows the default home page of the web application which has options like home, capture face, train database and test database. when you click on the camera option you can see a camera will be opened ready to capture the image. When click the train and test databases you get see what are the train and test images that stored in the respective databases. The number 3 marked on the test and train databases indicates that there are 3 images present those databases.
12 Read more
Abstract-Knowledge discovery in databases is the non-trivial process of identifying valid, novel potentially useful and ultimately understandable patterns from data. In the area of software, data mining technology has been considered as useful means for identifying patterns and trends of large volume of data. This approach is basically used to extract the unknown pattern from the large set of data for business as well as real time applications. It is a computational intelligence discipline which has emerged as a valuable tool for data analysis, new knowledge discovery and autonomous decision making. The raw, unlabeled data from the large volume of dataset can be classified initially in an unsupervised fashion by using cluster analysis i.e. clustering the assignment of a set of observations into clusters so that observations in the same cluster may be in some sense be treated as similar. The outcome of the clustering process and efficiency of its domain application are generally determined through algorithms. The aim this research is to analyze the computation time of k- mean clustering by varying the sample rate using stopwatch for time measurement.
IJEDR1702222 International Journal of Engineering Development and Research (www.ijedr.org) 1426 multiplier. However, in practice, multipliers are very difficult to implement and mixers are used instead. Although mixers perform the multiplication operation, they are not ideal and other unwanted signals are created in the process. The fundamental role of a mixer is to multiply two signals in the time domain. To understand why this is important for frequency translation consider two signals b(t) and c(t) defined as