• No results found

load sensing hydraulic systems

An Energy-Saving Control Strategy with Load Sensing for Electro-Hydraulic Servo Systems

An Energy-Saving Control Strategy with Load Sensing for Electro-Hydraulic Servo Systems

... a load-sensing variable pump was proposed in ...electro-hydraulic load sensing (EH-LS), which includes a constant displacement pump and an AC motor, was also utilized to improve the ...

8

Simulation of a Hydraulic Load Sensing Proportional Valve

Simulation of a Hydraulic Load Sensing Proportional Valve

... Abstract: Nowadays energy saving is a topical issue due to increasing fuel costs and this aspect is amplified by more stringent emissions regulations that impact on vehicle development. A recent study conducted by the ...

9

A review of energy saving techniques in mobile hydraulic machines

A review of energy saving techniques in mobile hydraulic machines

... Furthermore, load sensing systems is described as the current industry standard. Several alternative system types have been presented, such as independent metering, digital flow control, displacement ...

10

Power Matching and Energy Efficiency Improvement of Hydraulic Excavator Driven with Speed and Displacement Variable Power Source

Power Matching and Energy Efficiency Improvement of Hydraulic Excavator Driven with Speed and Displacement Variable Power Source

... power systems, several actuators are connected to one common ...of load sensing, negative control and positive control technol- ogy ...these systems, a four-side spool valve is used to control ...

12

Variational assimilation of remotely sensed flood extents using a 2 D flood model

Variational assimilation of remotely sensed flood extents using a 2 D flood model

... monitoring systems, and are therefore likely to be insufficient to support reliable model ...monitoring systems under ex- treme flow conditions and the difficulty in performing field ...remote ...

15

Dynamics Model of Backhoe Devices Considering Excavation Load for Hydraulic Excavators

Dynamics Model of Backhoe Devices Considering Excavation Load for Hydraulic Excavators

... Hydraulic excavator, which is one of the most widely used construction machineries, has complex structure and typical functions. It plays an important role in transportation, mining, construction industry, ...

10

Effect of Contamination on the Lifetime of Hydraulic Oils and Systems

Effect of Contamination on the Lifetime of Hydraulic Oils and Systems

... Viscosity is one of the most important properties of hydraulic fluids, and also an early indicator of ageing. The acidity of fluids as expressed by the total acid number (TAN) is of interest because it indicates ...

8

Hydraulics and Pneumatics: Operational Characteristics and Control for Modern Industry Applications

Hydraulics and Pneumatics: Operational Characteristics and Control for Modern Industry Applications

... control systems developed during this ...pneumatic systems in power sector. Today, pneumatic systems have reached the level of modern control ...pneumatic systems will grow continuously with ...

10

Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine

Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine

... [9], hydraulic cylinder’ speed of fatigue test gig can be governed by using frequency control technology in order to satisfy the ...control hydraulic speed governing system, established the simulation ...

7

Brief communication “Determination of urban growth in catchment areas in Cyprus using multi-temporal remotely sensed data: risk assessment study”

Brief communication “Determination of urban growth in catchment areas in Cyprus using multi-temporal remotely sensed data: risk assessment study”

... a hydraulic analysis in order to retrieve the return period of a flood event and then perform a risk assessment ...study. Hydraulic analysis was used to model the flood prone areas and to compute the depth ...

6

DESIGN AND FABRICATION OF HYDRAULIC TEST RIG FOR MANUAL RIGGING OF AIRCRAFT HYDR AULIC SYSTEM

DESIGN AND FABRICATION OF HYDRAULIC TEST RIG FOR MANUAL RIGGING OF AIRCRAFT HYDR AULIC SYSTEM

... The test rig is having the facility to connect all the line replacement units with power pack for that there is inbuilt hydraulic circuit. In first testing chamber for testing of different valves is consist of ...

9

Shell Elastic Critical Load Enhancement for Load Sensing Applications: Design Exploration and Study of Response Surface Characteristics

Shell Elastic Critical Load Enhancement for Load Sensing Applications: Design Exploration and Study of Response Surface Characteristics

... as load measuring device and explores design study to maximize the load bearing capacity of the ...of load capacity is quantified and contributions of newly added design variables has been shown to ...

5

Analysis of Shunt Active Filter with PI, Fractional Pi Controller and ANN based Controller

Analysis of Shunt Active Filter with PI, Fractional Pi Controller and ANN based Controller

... The simulation is carried out with the three phase three wire system with non-linear load. Here the diode rectifier is used as non-linear load. The Fig.5 shows the three phase current waveform without any ...

7

Force-sensing glove system for measurement of hand forces during motorbike riding

Force-sensing glove system for measurement of hand forces during motorbike riding

... The wearable portion of the system weighs approximately 145 g (four sensors + wires: 40 g, signal conditioning circuit with packaging + battery: 105 g). The entire system (including sensors and signal conditioning ...

9

Comparative Analysis of Load Test Hydraulic Oils and Various Non Edible Oil

Comparative Analysis of Load Test Hydraulic Oils and Various Non Edible Oil

... the hydraulic oil is a very complex process and the cost estimation is also very ...alternative hydraulic oils. From the conclusion of individual load test for various seed oil, pongamia seed oil ...

7

Assessment of Technical Condition of C Series Power Hydraulic Cylinders of Mounted Hydraulic Systems of Tractors

Assessment of Technical Condition of C Series Power Hydraulic Cylinders of Mounted Hydraulic Systems of Tractors

... of hydraulic cylinders with wear of the working sur- faces of the parts, defense of the doctoral thesis with scientific results presented in this article; ...

18

The Concept of Flexible Manufacturing System for a Newly Forming Robotic Enterprises

The Concept of Flexible Manufacturing System for a Newly Forming Robotic Enterprises

... Subsystems exchange mechanism is based on complex behavioral model of the enterprise (fig. 5). The main object in the behavioral setting is the “behavior” – the set of all signals compatible with the system. An important ...

5

Proportional Hydraulic Control System of Overrunning Variable Load Actuator

Proportional Hydraulic Control System of Overrunning Variable Load Actuator

... Electro hydraulic system has been built with automation studio package ...applied load at the ...the hydraulic pump supplying pressure at 6 bar,10 bar, and 15 bar ...

10

Design and Analysis of an Unmanned Aerial Vehicle Capable of Carrying the Camera

Design and Analysis of an Unmanned Aerial Vehicle Capable of Carrying the Camera

... the load and additional loads, location of the engine (end part of the body), location of equipment for takeoff and landing, location of electrical and hydraulic systems (nose section), plates and ...

10

A New Model in Design, Manufacturing and Assembly of Mobile Hydraulic Pipe Bending Machine in Industry

A New Model in Design, Manufacturing and Assembly of Mobile Hydraulic Pipe Bending Machine in Industry

... Hydraulics is the transmission and control of forces and motions through the medium of fluids. Short and simple. Hydraulic systems and equipment have wide-spread application throughout industry. For ...

12

Show all 10000 documents...

Related subjects