• No results found

Metallic Foams

Development of empirical equations for prediction of modulus of elasticity for monodisperse metallic foams

Development of empirical equations for prediction of modulus of elasticity for monodisperse metallic foams

... Abstract. Metallic foams are a class of lightweight materials that show high potential for dierent industrial applications such as automotive and aerospace ...prevented metallic foams from ...

7

Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading

Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading

... decades, metallic foams, particularly aluminum alloy foams, with an outstanding combination of mechanical and physical properties, have been developed as a new class of functional materials to limit ...

20

Change of Young's Modulus with Increasing Applied Tensile Strain in Open Cell Nickel and Copper Foams

Change of Young's Modulus with Increasing Applied Tensile Strain in Open Cell Nickel and Copper Foams

... Even in stage III, the number of failed struts increases, which acts to reduce the stress carrying capacity and therefore acts to reduce Young’s modulus value in compar- ison with the expected value under no failure. In ...

8

Open Celled Material Structural Properties Measurement: From Morphology To Transport Properties

Open Celled Material Structural Properties Measurement: From Morphology To Transport Properties

... Metal foams are a relatively new class of materials with low densities and attractive thermal, mechanical, electrical and acoustic ...Solid foams are widely quoted to present a random topology, high open ...

8

A constitutive model for the compressive response of metallic closed-cell foams including micro-inertia effects

A constitutive model for the compressive response of metallic closed-cell foams including micro-inertia effects

... Abstract. Metallic foams have known a keen interest in the last decades. Their ability to undergo very large deformations while transmitting low stress levels make them capable of performing functions of ...

5

Microfabricated Power Generation Devices

Microfabricated Power Generation Devices

... 2.4 Fabrication of Ceramic and Metallic Foams 10 2.4.1 Fabrication of Plate Heat-Exchangers/Reactors 10 2.4.2 Steel and Metal Material Choice 10. 2.4.3 Steel and Metal Plate Sealing Te[r] ...

8

Eddy current measurement of the electrical conductivity and porosity of metal foams

Eddy current measurement of the electrical conductivity and porosity of metal foams

... metal foams are a relatively new class of material, which are of interest because of the excep- tional ability to adapt their mechanical, thermal, acoustic, electrical, and chemical properties by varying their ...

7

Module1_Lubricants.pptx

Module1_Lubricants.pptx

... o These compounds react with metallic surfaces, at prevailing high temperatures, to form metallic chlorides, sulphide or phosphides. o These metallic compounds possess high me[r] ...

36

Promotional Products. Sample Book. Dealership-wide Solutions. Writing Instruments. Desk Accessories. Drinkware. Vehicle Accessories

Promotional Products. Sample Book. Dealership-wide Solutions. Writing Instruments. Desk Accessories. Drinkware. Vehicle Accessories

... Product Colors: black, blue, burgundy, clear, cream, forest green, green, metallic dark blue, metallic green, metallic orange, metallic red, navy, orange, pink, purple, red, silver, te[r] ...

9

Advances on High Temperature Pd-Based Membranes and Membrane Reactors for Hydrogen Purifcation and Production

Advances on High Temperature Pd-Based Membranes and Membrane Reactors for Hydrogen Purifcation and Production

... (http://www.inopor.com/). Metallic supports are more robust than ceramic ones, but the commercially available metallic supports, mainly tubular, have large and non-uniform pores and the surface has a rather ...

15

IMAGE ANALYSIS CHARACTERIZATION OF HIGHLY ORIENTED FREEZE-DRYING POROUS MATERIALS

IMAGE ANALYSIS CHARACTERIZATION OF HIGHLY ORIENTED FREEZE-DRYING POROUS MATERIALS

... conditions and has the advantage to be non- destructive for the pore structure. SEM images of longitudinal and transverse sections have been recorded at different magnifications. The relation between the ultramacropore ...

6

The Design of a Dual-Polarized Small Base Station Antenna with High Isolation Having Dielectric Feeding Structure

The Design of a Dual-Polarized Small Base Station Antenna with High Isolation Having Dielectric Feeding Structure

... Recently, many researchers have developed base station antenna with dual-polarization [2–20]. However, the size of the published base station antenna is large, and it is impossible to mount it on a metallic cube. ...

14

Auxetic foams for sports applications

Auxetic foams for sports applications

... auxetic foams, or novel impact hardening auxetic polymers ...‘Felted’ foams, fabricated by uniaxial compression, are already commercially produced and exhibit auxetic behaviour in one loading direction ...

181

Lubricants 1.ppsx

Lubricants 1.ppsx

...  These compounds react with metallic surfaces, at prevailing high temperatures, to form metallic chlorides, sulphide or phosphides.  These metallic compounds possess high m[r] ...

33

Structure and energy of liquid foams

Structure and energy of liquid foams

... disordered foams [36] show that their av- erage number of neighbours b N N is approximately ...two-dimensional foams [1]. Fig. 5. The topology and geometry of foams in the dry limit (φ b ...

16

Wall slip of bubbles in foams

Wall slip of bubbles in foams

... The variation of the liquid area 共corresponding to vol- ume if the system is extended in the third dimension兲 with Ca may have relevance to dilatancy in foams. This is an increase of the amount of liquid in a foam ...

12

A. Mechanical Behaviours of Metal Foams

A. Mechanical Behaviours of Metal Foams

... Among metal foams, titanium foams (Ti-foams) are preferred in many crucial applications including biomedical implants which biocompatibility is required. The main interests for using cellular metals ...

6

Dynamic indentation on layered polypropylene foams

Dynamic indentation on layered polypropylene foams

... multi-layered foams, the use of this numerical stiffness is necessary to prevent the soft layers from completely collapsing before the deformation of other ...

6

Chapter 16: The structure of liquid foams

Chapter 16: The structure of liquid foams

... Although being both computationally and conceptually attractive, the soft sphere model with its fundamental assumption of pairwise-additive interaction energies is only an approximation of bubble interaction. Computer ...

14

Characterization and Applications of Composite Metal Foams.

Characterization and Applications of Composite Metal Foams.

... open-cell metallic foam structure. These foams can also be manufactured by packing leachable material particles, such as NaCl, then casting molten metal around the NaCl particles, and followed by a removal ...

192

Show all 1835 documents...

Related subjects