nanoporous carbon materials
Influence of Base Additive on Nanoporous Carbon Materials via HTC for Catalyst Support
... Morphology of prepared activated carbon shown as scanning electron micrograph in Fig. 3 (a-d). After activated the hydrochar by chemical activation with base significant change on the surface morphology can be ...
6
Mechanochemical synthesis of carbon-based nanocomposites for supercapacitors
... of nanoporous carbon materials (NCMs) were determined from nitrogen adsorption/desorption BET isotherms obtained with a Sorbtometr M Surface Analyzer (Kataron ...of carbon materials was ...
5
Modified Nanoporous Carbon Material for Anionic Dye Removal from Aqueous Solution
... mesoporous carbon material (CMK-1) and modified with polymer (PANI/CMK-1) has been investigated as a function of parameters such as adsorbent dose ...synthesized materials were studied by XRD, SEM, and ...
10
GREEN FLUORESCENT CARBON DOTS: A NOVEL DRUG TARGETING AND CELL IMAGING AGENT
... GCDs can be modified to exploit enhanced properties and diverse functions. Chandra et al. prepared green-PL-colored CNDs by microwave irradiation of sucrose with phosphoric acid. Fluorescein, rhodamine B and ...
10
Characteristic Observation of Mechanical and EMI Shielding Property of ABS
... sensitized carbon fibers were rinsed in distilled ...activated carbon fibers are rinsed in distilled ...coated carbon fibers were drained, rinsed and was subjected for ...
7
Ordered nanoporous silica as carriers for improved delivery of water insoluble drugs: a comparative study between three dimensional and two dimensional macroporous silica
... toxic materials could be observed by optical ...and nanoporous silica-exposed ...other nanoporous silica, demonstrating their low toxic effect and good ...
17
Construction sector views on low carbon building materials
... specific materials an attempt was made to dis- tinguish the differences between perceptions and experi- ...low carbon materials increase project costs, can only ultimately be resolved through the ...
23
SAXS investigation of nanoporous structure of thermal modified carbon materials
... the materials (specific area, total pore volume, micropore volume, di- mensions and forms of pores, their size distribution, fractal structure, ...of materials under operating ...
6
Synthesis of Carbon Fibers and Its Surface Area Mesurments Brijesh Gaud, Amrita Singh, Sandesh Jaybhaye
... [6] Jidong Dong, Chuyuan Jia, Mingqiang Wang, Xiaojiao Fang, Huawei Wei, Huaquan Xie, Tong Zhang, Jinmei He, Zaixing Jiang, Yudong Huang “Improved mechanical properties of carbon fiber-reinforced epoxy composites ...
5
Design and Development of Furnace for Carbon to Be Used In Supercapacitor
... There are various techniques developed for the measurement of pressure and vaccum. Instrument which is used for the measurement of pressure is known as pressure guage. A vaccum guage is used to measure the pressure in ...
6
Highly Efficient Elimination of Carbon Monoxide with Binary Copper Manganese Oxide Contained Ordered Nanoporous Silicas
... eliminate carbon monoxide have attracted much attention ...related materials have been reported by different ...for carbon monoxide elimination, their further application has been limited due to ...
6
Carbon nanotubes on nanoporous alumina: from surface mats to conformal pore filling
... of carbon nanotubes in nanopores of alumina membranes is possible by using plasma posttreatment of the membrane and application of S1813 photoresist as an additional carbon ...walled carbon nanotubes ...
8
A Study On The Optimum Natural Gas Storage Tank Design Using The Gas Adsorbent Application
... hydrocarbon molecules (Physical and Chemical Fundamentals McGraw Hill, 1975). The hydrocarbon in natural gas called saturated hydrocarbons because they contain hydrogen and carbon. This gas methane has to be ...
24
Complex Protective Coatings for Graphite and Carbon Carbon Composite Materials
... The protective layer formation mechanism was studied by the method of thermodynamic analysis of possible chemical reactions between the system components [21]. For this purpose the analysis was performed, in partic- ...
10
STRUCTURAL ANALYSIS OF BRAKE DISC PLATE USING THREE DIFFERENT MATERIALS
... Abstract—Disc(Rotor) brakes are exposed to large thermal stresses during routine braking and extraordinary thermal stresses during hard braking. The aim of the project is to design, model a disc. Modeling is done using ...
5
Design and Analysis of a Space Capsule
... The materials used for this nose cone are the Carbon epoxy, Hafnium diboride and Zirconium diboride when we compare all these materials the Carbon epoxy material can sustain the thermal ...
7
Eco friendly synthesis for MCM 41 nanoporous materials using the non reacted reagents in mother liquor
... The solid yield of the MCM-41 silica materials for the three subsequent cycles was calculated to be 73.6, 71.9, and 78.3 wt.%, respectively, according to dry mass solid analysis (Table 1). Thus, the solid product ...
8
Sn-Cu Alloy Materials with Optimized Nanoporous Structure and Enhanced Performance for Lithium-Ion Batteries Prepared by Dealloying
... the nanoporous Sn-Cu alloys, their specific capacities keep in 375 mA h g -1 , 388 mA h g -1 , and 278 mA h g -1 , respectively after 50 ...cycles. Nanoporous Sn-Cu alloy show an improved cycling ...
10
Preparation and Optimization of Nanoporous Hollow Carbon spheres /S Composite Cathode Materials for Li-S battery
... conductive carbon matrix, aiming to make the sulfur electrode electrically active and trap soluble polysulphides in the nanopores avoiding the loss of active ...nanostructured carbon materials, such ...
12
Electrochemical Properties of Nanoporous Carbon Material in Aqueous Electrolytes
... growing at a high scan rate, where the EDL cannot be fully formed, which is the reason why the reduction of the material capacity is at a high charge/discharge speed. Discharge capacity and internal resistance were ...
6