no-answer call forward
VARIABLE FORWARD NO ANSWER OPERATIONS GUIDE
... doesn’t answer by then, VFNA will forward the call to extension station ...Variable Forward No Answer, in plain English, means that the VFNA database directs where and when to ...
30
Keyset User Guide—with Display Item Number 699029
... No Answer Call Forward features to direct your calls to your voice mail ...the call back from voice mail in order to talk to the calling ...
96
CALL FORWARD CONTROL Installation & Operations Manual
... Each Call Routing Pattern is given a Pattern Index and two lists of Destination Index ...not answer, and all ...the Call Routing Destinations database, which contain a start time and a list of ...
120
User Guide—Single Line Telephone Item Number 699031
... can forward calls to extensions or hunt groups. Specify whether to forward all calls, just intercom or just outside ...No Answer Call Forward, you may choose to forward the first ...
52
Features and Specifications Manual
... S-25 Synchronous Ringing ................................................................S-105 S-26 System Data Up/Down Load ....................................................S-107 T-1 T1 Connection ...
937
PARTNER Plus / II Release 3.1 Communications System and PARTNER MAIL VS Voice Messaging System Quick Reference
... number dialed, duration of call, and feature messages. When receiving an intercom call, shows the number (and name if programmed) of the extension calling. When in programming mode, displays programming ...
18
Tone Commander 30e120 Installation Instructions
... The system recognizes normal or distinctive ringing from the serving central office/PABX and responds with differentiated audible signaling. The 30e console also signals the attendant when held lines are recalling, calls ...
92
NEAX2000 IVS 2 General Description
... The LED's provide continuous information relative to the status of calls in progress. The display provides station and trunk identification, class of service and the number of calls waiting. The LCD changes with ...
106
Multibutton Telephone Feature Handbook
... outside call to a co-worker, Ring Group, UCD Hunting Group or Voice ...a call to the desired co-worker. A call you Transfer automatically recalls to you if not picked up at the Transfer ...don’t ...
116
Mæstro Mæstro 3500CW User Guide
... Note: You may turn off the audio so that your caller cannot hear you at anytime when using Speaker/Mute. Simply press S PEAKER /M UTE during your call. The small light beside the key will begin to flash when Mute ...
20
Introduction 2 Programming Ringing Options 3 Features on a BIS-34D Voice Terminal
... #60 through #89 and #900 through #999 to telephone 1 If you have a button programmed with this code, numbers that people in your system call often, such as touch the button. If not, dial the pound sign and vendors ...
26
User Guide
... You can define various conditions under which to apply a rule, such as calls from/to a specific number, calls arriving when you are in a specific state or calls received before/after specific date/time. You can then ...
27
Keyset User Guide with display Mat Code 699050
... Voice Call mode to ...No Answer Call Forwarding instructions that may have been ...Voice Call feature. If you call an extension that has enabled Do Not Disturb on the keyset, you may be ...
72
A Study on Mobile Communication in Global Systems for VANET
... Visitor location registers (VLR)—The VLR is a database that contains brief information about subscribers that is needed by the MSC in Order to service visiting subscribers. The VLR is always combined with the MSC. When a ...
6
NEAX2000 IVS CCIS Features and Specifications
... 15.If the called party goes on hook while the calling party is waiting on hook for Call Back-CCIS, both the call- ing and called parties will be rung simultaneously, if the setting station is in the ...
111
Wisdom of Students: A Consistent Automatic Short Answer Grading Technique
... model answer is a one time task that does not de- pend on size of the student ...model answer in Table 1 is more detailed and self-contained than the model answer ‘‘Abstraction and reusability’’ for ...
10
CCIS Features and Specifications
... set CALL FORWARDING-BUSY LINE - CCIS because both the called and forwarded-to stations are busy, and if the calling station activates BUSY VERIFICATION - CCIS [B-9], CALL BACK - CCIS [C-44], CALL ...
213
User Guide – BizTouch™ IP2 Regulatory Notices
... Line Appearance – When defined as a Line Appearance button, you have the ability to monitor a specific outside line (FXO/DID loops). With an incoming call, all the users monitoring that specific outside line will ...
23
AUDIX™ Voice Power Release 2.1.1 Switch Notes for System 75 Communications System
... provide Call Answer Service for the ...the call after the transfer is performed, or return to the caller when the ringing ...must call a separate group of one or more channels configured for ...
62
DKT/IPT Telephone User Guide
... This feature prevents callers from monitoring the sounds near your telephone when your telephone receives a Handsfree Call or cuts-off the telephone microphone while on a speakerphone call. When the feature ...
114