• No results found

pin hole

Defect analysis in a casting component and measures to mitigate it using Non-Destructive Testing and Genetic Algorithm

Defect analysis in a casting component and measures to mitigate it using Non-Destructive Testing and Genetic Algorithm

... Blow hole, pin hole and shape related defects on the material due to grinding for surface finish, are present in the component which results in the rejection of the component [3, ...

7

Study on the Single-Lens Telescope and Its Imaging Parameters

Study on the Single-Lens Telescope and Its Imaging Parameters

... (a)) and measure generally the resolving power of the single-lens telescope. The contrast between the experimental results and theoretical values is shown in Figure 11 (b). Due to the restrictions of manufacturing ...

8

Catalogue of the type specimens of true bugs (Hemiptera: Heteroptera) deposited in the National Museum, Prague, Czech Republic. Pentatomomorpha: Aradidae

Catalogue of the type specimens of true bugs (Hemiptera: Heteroptera) deposited in the National Museum, Prague, Czech Republic. Pentatomomorpha: Aradidae

... with pin hole; left antennal segment III and IV, right antennal segment IV, left mesotibia and mesotarsus, right middle leg, and right metatibia and metatarsus ...

34

Improving the Transient Thermal Fatigue Life of a Gas Turbine Casing by Drilling Stop Holes and Inserting Pins into Them

Improving the Transient Thermal Fatigue Life of a Gas Turbine Casing by Drilling Stop Holes and Inserting Pins into Them

... a hole and tapping the pin into the hole to draw the sides of the crack ...itching pin and a conventional bolt to show the difference between them ...itching pin hole was ...

8

Effect of Interlayer Thickness on Fatigue Behavior in A5052 Aluminum Alloy with Diamond Like Carbon/Anodic Oxide Hybrid Coating

Effect of Interlayer Thickness on Fatigue Behavior in A5052 Aluminum Alloy with Diamond Like Carbon/Anodic Oxide Hybrid Coating

... the specimen surface, fatigue limit was higher and fatigue lives were longer than the substrate. In A10 specimens without DLC over-layer, lower fatigue strengths than the substrate was attributed to the ...

7

Nanodiamonds enable adaptive-optics enhanced, super-resolution, two-photon excitation microscopy

Nanodiamonds enable adaptive-optics enhanced, super-resolution, two-photon excitation microscopy

... The fluorescent light emitted from the sample was coupled via an optical fibre (acting as the confocal pin hole for the single photon excitation) to a single pixel detector, a Laser Components avalanche ...

13

Failure Analysis of Unidirectional Composite Pinned- Joints

Failure Analysis of Unidirectional Composite Pinned- Joints

... geometries were chosen, bearing stress and shear stress of specimens are analyzed by both experiential and numerically. The shear strength of single-hole joints has been shown to be strongly dependent on the ply ...

9

Effect of the Starting Point of Half Pin Insertion on the Insertional Torque of the Pin at the Tibia

Effect of the Starting Point of Half Pin Insertion on the Insertional Torque of the Pin at the Tibia

... Purpose: The authors have observed a failure to achieve secure fixation in elderly patients when inserting a half-pin at the anteromedial surface of the tibia. The pur- pose of this study was to compare two ...

5

Does a Restricted Quintic Polynomial in Minimum Time Step (Planck Time Interval) Being Solvable in a Galois Theory Sense Affect the Closing of a Wormhole Throat if (Kaluza Klein Theory) Is Assumed and Impact Admissible Gravitational Wave Polarization?

Does a Restricted Quintic Polynomial in Minimum Time Step (Planck Time Interval) Being Solvable in a Galois Theory Sense Affect the Closing of a Wormhole Throat if (Kaluza Klein Theory) Is Assumed and Impact Admissible Gravitational Wave Polarization?

... worm hole throat. The technology for a possible worm hole detection may ultimately lie in the measurement protocols as outlined by [109] in the case of astrophysical worm- ...black hole-white ...

28

Research of network payment system based on multi factor authentication

Research of network payment system based on multi factor authentication

... and PIN, because the PIN is transmitted in the network so easily hacked and stolen, and the use of hardware devices are not removed in time for illegal operations ...

5

Flow Visualization of Multi Hole Film Cooling Flow under Varying Freestream Turbulence Levels

Flow Visualization of Multi Hole Film Cooling Flow under Varying Freestream Turbulence Levels

... cooling hole as shown in Figure 13, shed off and convect downstream causing the fluctuation of the coolant ...cooling hole documented by Walters and Leylek [15] ...cooling hole flow field, in which ...

17

PIN-   Genres of Writing

PIN- Genres of Writing

... As the pilot took off I started to feel sick. There was some turbulence, and I asked the pilot if we could go back down. He said not if you want to be in the Egg Force. Then there was a big bump. I looked to see if I ...

20

Hijab Pin Ingestions

Hijab Pin Ingestions

... hijab pin penetrated the vertebral artery 9 and was removed ...hijab pin was originally aspirated into the airway (as proven by a radiograph) and was later found in the GI ...hijab pin could be ...

10

Survey of Malicious Attacks in MANET

Survey of Malicious Attacks in MANET

... Rutvij H. Jhaveri [7] proposed a protocol MR-AODV which is modification of R-AODV. MR-AODV establishes the secure route for data transmission by detecting black hole and gray hole nodes during route ...

5

Smart ATM Security Using Mobile Messaging

Smart ATM Security Using Mobile Messaging

... 2. Password Guessing:- ATM PIN number is an 4 digit .There for an attacker can easily guess the PIN number. The attacker can try number of pattern( ig. birthdates, bike number).If any password match then ...

6

DR-135 Service Manual

DR-135 Service Manual

... of pin 13 of CPU (IC1) into “H” level at set mode, so that Q9 and Q3 will turn ON to make the lamp control resistor R84 short and make its illumination ...makes pin 13 into “L” level, Q9 and Q3 will turn ...

40

Modeling & Optimization of Laser Beam Drilling Process Using Genetic Algorithm

Modeling & Optimization of Laser Beam Drilling Process Using Genetic Algorithm

... For getting the best quality of holes using pulsed ND YAG laser machine is mainly depends upon the operating parameters like pulse width, light intensity, gas pressure , type of gas, pulse frequency, beam diameter…etc. ...

9

Short message service remotely mobile device control

Short message service remotely mobile device control

... the pin code in the received message is right, but action part does not match the operations specified in the App, then App should reply to the sender that the message not ...

21

To Pin or not to Pin   Pinterest and copyright

To Pin or not to Pin Pinterest and copyright

... to Pin. However this does not mean that you can just Pin from this website as although they may have permission to use an image it does not mean that everyone does ...

5

Stress Analysis of Interference Fit by FEM

Stress Analysis of Interference Fit by FEM

... of pin and hole problems in interference fit with the finite element method, the stiffness relationship between the two contact areas is usually established through a spring that is placed between the two ...

8

Show all 3252 documents...

Related subjects