• No results found

pressure die-casting machine

Process Capability Analysis of High Pressure Die Casting Process for Cap Manufacturing

Process Capability Analysis of High Pressure Die Casting Process for Cap Manufacturing

... High pressure die casting (H.P.D.C.) is a specialized casting process in which molten metal is forced by applying external force into a metal die ...high pressure into cavity of ...

9

Influence of Processing Parameters on the Performances of High Pressure Die Casting Process

Influence of Processing Parameters on the Performances of High Pressure Die Casting Process

... term casting is also applied to the part that is made by this ...of casting seems to be quite simple: melting the metal, pouring it into a mould, and then cooling and ...successful casting operation. ...

7

Analysis of Mechanical and Thermal Stresses in a Pressure Casting Machine Plunger

Analysis of Mechanical and Thermal Stresses in a Pressure Casting Machine Plunger

... with die of foundry machine with cold chamber with horizontal inundation chamber can model as Lame problem, so stress distribution in thin‑walled plunger subjected to only external pressure p, as it ...

15

EDM Studies on Aluminum Alloy Silicon Carbide Composites Developed by Vortex Technique and Pressure Die Casting

EDM Studies on Aluminum Alloy Silicon Carbide Composites Developed by Vortex Technique and Pressure Die Casting

... Aluminum based metal matrix composites (MMCs) offer potential for advanced structural applications when high specific strength and modulus, as well as good elevated temperature resistance, are important. In the present ...

10

Optimization of Process Parameters in Cold Chamber Pressure Die Casting Using Doe

Optimization of Process Parameters in Cold Chamber Pressure Die Casting Using Doe

... aluminium pressure die casting operation is ...a die casted component was porosity and the potential factors causing it are identified through cause-effect ...The pressure of the ...

7

Design and Fabrication of Semi Automatic Gravity Die Casting Machine

Design and Fabrication of Semi Automatic Gravity Die Casting Machine

... gravity die casting process molten metal poured into metallic mould flow under the molten metal due its self ...of casting is nearby 750 degree. Gravity die casting is also name as ...

5

Various Type of Defects on Pressure Die Casting for Aluminium Alloys

Various Type of Defects on Pressure Die Casting for Aluminium Alloys

... The difference of this process with the hot-chamber process is that the injection system is not submerged in molten metal. On the contrary, metal gets transferred by ladle, manually or automatically, to the shot sleeve. ...

5

Defect detection in high pressure die casting product using image processing technology

Defect detection in high pressure die casting product using image processing technology

... A cold chamber machine is used for high melting point casting alloys because plunger and cylinder assemblies are less subject to attack since they are not submerged in molten metal [8j..[r] ...

24

A REVIEW ON DESIGN OPTIMIZATION OF AUTOMOBILE WIPER CASTING DIE

A REVIEW ON DESIGN OPTIMIZATION OF AUTOMOBILE WIPER CASTING DIE

... of Pressure die-casting process parameters to identify optimized level for improving the cycle time using Taguchi method for ...20tonn machine capacity is used to calculate cycle ...Injection ...

6

Temperature measurement and thermal control of die casting processes using CCD cameras

Temperature measurement and thermal control of die casting processes using CCD cameras

... the die insert and a thermocouple is placed at each region where temperature measurement is ...the die that is in contact with the solidifying ...the die inserts, the cooling system can be modified ...

108

Design For Die Casting (Spanner)

Design For Die Casting (Spanner)

... The Dies are usually made of alloy or tool steel and are quite expensive to make. Some have one or two identical mould cavities for larger parts, and others may have several different cavities. Some dies are more ...

24

Stress Analysis of Thin Wall Core Pin in Aluminum Alloy High Pressure Die Casting

Stress Analysis of Thin Wall Core Pin in Aluminum Alloy High Pressure Die Casting

... the casting from the core pin due to adhesions and cracks on the casting sur- ...the die release force because it does not originate from friction force but from high temperature shear stress of the ...

6

Casting Pressure in Two Types of Titanium Casting Equipment

Casting Pressure in Two Types of Titanium Casting Equipment

... one-chamber casting equipment, the pressure difference, as well as the mold permeability, changes drastically with time ...Each pressure difference curve has the maximum value at time ...the ...

7

ALTERNATIVE CASTING METHODS FOR LARGE SIZED COMPONENT OVER SAND CASTING METHODS: A REVIEW

ALTERNATIVE CASTING METHODS FOR LARGE SIZED COMPONENT OVER SAND CASTING METHODS: A REVIEW

... D.Caulk [4] describes the analysis method, assumptions, and governing equations, paper discusses applications of the analysis to a variety of pattern shapes that exhibit different types of mold filling behavior, many of ...

6

Casting and Analysis of Squeeze Cast Aluminium Silicon Eutectic Alloy

Casting and Analysis of Squeeze Cast Aluminium Silicon Eutectic Alloy

... • After the manufacture and commissioning of the squeeze casting machine, that it be used to investigate the effect of squeeze casting at varying pressures on the macrostructure, microst[r] ...

237

Pore Defect Control in Die Casting by Compression Loading

Pore Defect Control in Die Casting by Compression Loading

... high pressure die casting. High pressure die casting has considerable advantages over other manufactur- ing ...high pressure die casting induces many ...

5

Design and Analysis of an Aluminium Die Casting Die for a Compressor Rotor

Design and Analysis of an Aluminium Die Casting Die for a Compressor Rotor

... x Die opening force ...of casting = (600+480) gms =1.08 kgs For getting good machine life ,the die casting machines are used maximum up to 75% of their capacity, if uses the ...

5

Microstructural Characteristics of Sr and Na Modified Al-Mg-Si Alloy

Microstructural Characteristics of Sr and Na Modified Al-Mg-Si Alloy

... From the above graph it can be observed that Dendritic cell size of permanent cast specimen was much smaller than the sand cast specimen. The decrease in grain size was about 24%.This could be due to faster cooling rates ...

9

Design of Pig Casting Machine

Design of Pig Casting Machine

... The PCM strand is an endless chain carrying the pig moulds. The strands are placed at an inclination. The level of the inclination is decided on the height required for receiving the molten metal and for discharging the ...

6

A REVIEW ON PROBLEM OF SHRINKAGE IN ALUMINUMALLOY LOW PRESSURE DIE WHEEL CASTING AND ITS CONTROL

A REVIEW ON PROBLEM OF SHRINKAGE IN ALUMINUMALLOY LOW PRESSURE DIE WHEEL CASTING AND ITS CONTROL

... Presently with the increasing use of Aluminium alloy wheels in automotive industry the Aluminium foundry industry had to focus on the quality of the products. The quality of a foundry industry can be increased by ...

7

Show all 10000 documents...

Related subjects