print server

Top PDF print server:

Multi-Protocol Print Server NC-4100h USER’S GUIDE

Multi-Protocol Print Server NC-4100h USER’S GUIDE

Depending on the system, this entry might be called "bootps" instead of "bootp". In order to enable BOOTP, simply use an editor to delete the "#" (if there is no "#", then BOOTP is already enabled). Then edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network type (1 for Ethernet), Ethernet address and the IP address, subnet mask and gateway of the print server. Unfortunately, the exact format for doing this is not standardized, so you will need to refer to your system documentation to determine how to enter this information (many UNIX systems also have template examples in the bootptab file that you can use for reference). Some examples of typical /etc/bootptab entries include:

168 Read more

Problems with the Print Server

Problems with the Print Server

m The PostScript printer description (PPD) file for the queue may be inappropriate for the document. (For each queue, the Print Server uses the PPD file for the printer that was attached first to the print queue. If you attach printers that have different capabilities, documents that require those capabilities will not print—even when they are assigned to the correct printer.) Create a separate queue for the printer and try printing again. m The program printing the document may not be compatible with the Print

49 Read more

HP JetDirect 170x Manual pdf

HP JetDirect 170x Manual pdf

A failure was detected when the HP Jetdirect print server tried to attach to one of the queues assigned to the print server object. This may be because no servers are allowed to attach to this queue. There may also be a networking or security problem. Use PCONSOLE to make sure that servers are allowed to attach to the queue, to delete the print server object from the list of queue servers if you want the HP Jetdirect print server to service other queues, or to delete the queue and create a new one (the print server object must be added to the list of queue servers).

114 Read more

Citrix Consulting Services Citrix Systems, Inc.

Citrix Consulting Services Citrix Systems, Inc.

Active Directory is a database system that is typically run on the domain controllers in a Windows 2000 environment. Windows 2000 infrastructure designs need to consider the implementation of Active Directory services as it simplifies the management of printers and printing services. When network or local printers are added (published) on a print server running Windows 2000, Active Directory will automatically create a printer object (printQueue) for it, which will contain all of the information about the printer such as name, location, and description. After a printer is added in Active Directory, Active Directory can be used to manage, locate, and connect to it. (Active Directory replication ensures that all of the data about the printers is synced and shared across all of the servers running Active Directory). This makes searching for printers much easier for users accessing the system. Figure 19.1 shows how this works.

54 Read more

Print Management Step-by-Step Guide

Print Management Step-by-Step Guide

To do this, you use the Deploy with Group Policy dialog box to automatically add a printer connection setting to an existing Group Policy object (GPO) in Active Directory. When Group Policy processing runs on client computers, the printer connection settings are applied to the users or computers associated with the GPO. Printers you deploy by using this method appear in the Deployed Printers object of Print Management tree when the print server they are connected to is being monitored. You will have Read Access on the GPO to which the printers are being deployed.

24 Read more

WRL TN 4 pdf

WRL TN 4 pdf

A PrintServer is a computer connected to a computer network. It is a PostScript printer, but it has its own Internet address, and it uses the Internet protocols to communicate with its clients. A client is a program on some other computer that wishes to communicate with the PrintServer. There are two kinds of clients: ordinary clients and management clients. An ordinary client is a program that wishes to print a file or enquire about the status of the printer. A management client is a privileged program that provides system services to the printer and that receives and records accounting information. Different management clients offer different services, and the details are not part of the Print Server Protocol, but rather are part of the private agreement between the server and its management client.

16 Read more

Client server application for server farm performance monitoring

Client server application for server farm performance monitoring

Early time server farms were used mostly in academic and research services but has changed. But know universities and all companies are using server farms. Though a mainframe can house up more than hundreds of virtual machines and eat less energy. They are also easy to manage and maintain when it use server farms an experts needs to fix physical problems while the mainframes is mostly likely a software issues. However a large server farm wants a lot of cooling systems and extremely large amount of power. For this reason, server farm is measured by performance per watt rather than performance per processor.

24 Read more

Print Journal Copy

Print Journal Copy

limiting situation, when no further repair is possible, then system is replaced by new one. In this paper Behavioral Analysis of a single unit system with Preventive Maintenance and Degradation after Complete Failure using Regenerative Point Graphical Technique (RPGT) is discussed. Initially the unit is working at full capacity which may have two type of failures, one is direct and second one is through partial failure mode. There is a single server (repairman) who inspects and repairs the unit as and when need arise. On partial failure (before complete failure) server repairs the unit which is perfect, but the unit and on complete failure the unit cannot be restored to its original capacity. If the server reports that unit is not repairable then it is replaced by a new one. Fuzzy concept is used to determine failure/working state of a unit. Taking failure rates exponential, repair rates general and taking into consideration various probabilities, a transition diagram of the system is developed to determine Primary circuits, Secondary circuits & Tertiary circuits and Base state. Problem is formulated and solved using RPGT. Repair and Failure are statistically independent. Expressions for systems parameters i.e. mean time to system failure, availability, and number of server visits and busy period of the server are evaluated to study the behavior of the system for steady state. Particular cases are taken to study the effect of failure and repair rates on mean time to system failure, availability, and expected number of server visits and busy period of the server. Profit optimization is also discussed. System behavior is discussed with the help of graphs and tables.

210 Read more

QuickTime Streaming Server Darwin Streaming Server

QuickTime Streaming Server Darwin Streaming Server

An administrator computer must be set up before you can configure and manage your streaming server if, as in this example, the streaming server is running headless. For information on setting up an administrator computer, see “Setting Up an Administrator Computer” in Getting Started With Mac OS X Server (included on the Mac OS X Server CD). Any computer with a reasonably up-to-date browser connected either directly to the local network or to the Internet can be used to manage QTSS remotely once Mac OS X Server has been configured. For this example, we assume that the broadcaster laptop in the streaming setup illustration is also used for this purpose.

86 Read more

Manova on print advertising

Manova on print advertising

In this research, we want to test the effects of different print ad copy elements on attitude toward product and intention to buy by using MANOVA. MANOVA, Multivariate Analysis of Variance is a type of multivariate analysis used to assess the statistical significance of differences that involves more than one independent variable in one time. The null hypothesis tested in MANOVA is the equality of vectors of means on multiple dependent variables across groups.

7 Read more

Personalized print in Europe

Personalized print in Europe

printers do not have enough knowledge and therefore do not feel confident enough to sell personalized print? Printing companies over the years have been used to getting jobs handed to them, and their job has been to put ink on paper. They have to change their mindset, which can take a long time. In order to produce personalized print, printers also must obtain a new skill set and the knowledge and capability to produce high-quality personalized jobs. Printing companies might not have these capabilities, or they might not want to grow their business in that direction.

101 Read more

The Influence of Booklet Print and Leaflet Print Media to Improve Reproductive Health Knowledge in Adolescent

The Influence of Booklet Print and Leaflet Print Media to Improve Reproductive Health Knowledge in Adolescent

Based on statistical tests on the above table shows that the results of the use of the print media booklets and leaflets class A on reproductive health knowledge is as follows: The output displays the mean pretest and posttest class A is 2.0, the standard deviation of the mean of error standard 2.23453 and 0.40797. Differences in the two lowest -0.63439 1.03439 while the highest distinction. The test results with the test t = 0.490 df = 29, and the significance of .628. Based on the t table for df = 29, the figure of 2.04 for the significant level of 5% and a significance level of 2.76 to 1%. With t0 = 0.490 tt is smaller than the significance level of 5% and 1% significance level (2.04> 0.490 <2.76, which means null hypothesis is accepted. In conclusion there is no significant difference between the use of print media booklets and leaflets in improving knowledge of reproductive health. This is confirmed from the test results that showed a mean both have almost the same value

7 Read more

The Print Industry Fights Back : The story of Ireland's Print & Packaging Forum

The Print Industry Fights Back : The story of Ireland's Print & Packaging Forum

Other key figures on the trade-union side also recognised the need for change, especially when faced with a rising tide of competitive pressures and new technologies. Shane McKean of the Irish Print Group within SIPTU cites the example of Independent Newspapers, where he was formerly Father of the Chapel. “It was recognised by union representatives in the Indo that rather than just wait for management to introduce new technologies, they should approach management to discuss it, as opposed to what happened in the UK, where unions buried their heads in the sand and allowed management to come along and hack them.”

32 Read more

The Amoeba Interaction Network: Initial Results

The Amoeba Interaction Network: Initial Results

The response time for the interaction network shown in Figure 4 is 32.2ms, of which about 18ms is taken up by writing of 19 characters to the terminal. Four RPCs were needed, requiring eight ethernet packets. To improve performance, reasons for the two RPCs made to the session server could be investigated to see whether they can be eliminated. Also, the run server could be changed to consider communication patterns as well as machine load when process placement decisions are made.

19 Read more

Networking 7th Ed For Dummies.pdf

Networking 7th Ed For Dummies.pdf

Sharing a printer is much more traumatic than sharing a hard drive. When you share a hard drive, other network users access your files from time to time. When they do, you hear your drive click a few times, and your com- puter may hesitate for a half-second or so. The interruptions caused by other users accessing your drive are sometimes noticeable, but rarely annoying. But when you share a printer, you get to see Murphy’s Law in action: Your coworker down the hall is liable to send a 40-page report to your printer just moments before you try to print a 1-page memo that has to be on the boss’s desk in two minutes. The printer may run out of paper or, worse yet, it may jam during someone else’s print job — and you’ll be expected to attend to the problem.

435 Read more

CloudBridge: A cloud-powered system enabling mobile devices to control peripherals without drivers

CloudBridge: A cloud-powered system enabling mobile devices to control peripherals without drivers

CloudBridge enables peripheral support in smart devices in a way that is universally applicable and completely inde- pendent from local PCs. It also provides indistinguishable experiences to users when controlling peripherals comparing to that from a conventional PC. CloudBridge system consists of an user application for smart devices and a daemon for a cloud server. As shown in Figure 1, the application running on a smart device sets up TCP sockets with a networked pe- ripheral and a cloud server. Using the sockets connecting both sides, CloudBridge makes a smart device as a trans- parent bridge allowing the cloud server with an appropriate driver to communicate with the peripheral. Since the cloud server is assumed to have drivers for most of the peripherals in the market and is controlled by the application, the pe- ripherals become immediately accessible from smart device users. We apply the proposed system to operate networked printers throughout this paper, but one should note that this technique is not limited to printing but applicable to wide variety of peripherals equipped with networking capability.

11 Read more

FINGER PRINT VOTING SYSTEM

FINGER PRINT VOTING SYSTEM

The project titled “Finger voting system” is designed using Microsoft Visual Studio.Net as front end and Microsoft SQL Server as back end which works in .Net framework version 3.5. The coding language used is VB .Net Voting Registers system helps us to manage all the voting person details in a correct format. Using finger print system there will not be any mal function. Following are the modules in this project. The objective of this software development project is to create a new system to be used by the Concern staff’s and end-users which consists of Administrative staffs, Super-user staffs and end-users. Voting shall provide the Voter, winner with the capability to: Person Details Management, Finger Print Recognition and Voting Management.

6 Read more

Multi-Protocol Print / Fax Server NC-8100h USER’S GUIDE

Multi-Protocol Print / Fax Server NC-8100h USER’S GUIDE

If your Administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your Brother Print / Fax server can receive an IP address from any one of these IP address allocation systems, in which case, you will not need to use the ARP command. The ARP command only works once. For security reasons, once you have successfully configured the IP address of a Brother Print / Fax server using the ARP command, you cannot use the ARP command again to change the address. The Print / Fax server will ignore any attempts to do this. If you wish to change the IP address again, use a Web Browser, TELNET (using the SET IP ADDRESS command) the FAX/MFC’s front panel or factory reset the Print / Fax server (which will then allow you to use the ARP command again).

181 Read more

Mac OS X Server Print Service Administration

Mac OS X Server Print Service Administration

© 2003 Apple Computer, Inc. All rights reserved. The owner or authorized user of a valid copy of Mac OS X Server software may reproduce this publication for the purpose of learning to use such software. No part of this publication may be reproduced or transmitted for commercial purposes, such as selling copies of this publication or for providing paid-for support services.

52 Read more

Reviewer’s Guide

Reviewer’s Guide

When you configure Content Redirection from client to server, users running the ICA Win32 Program Neighborhood Agent open all files of the associated type encountered in locally running applications with applications published on the MetaFrame XP server. If you have users who run applications such as email programs locally, you can use MetaFrame Content Redirection with the ICA Win32 Program Neighborhood Agent to redirect application launching from the client device to the MetaFrame server. When users double-click attachments encountered in an email application running locally, the attachment opens in an application that is published on the MetaFrame server, associated with the corresponding file type, and assigned to the user. For more information on content redirection, see the MetaFrame XP Server Administrator’s Guide.

101 Read more

Show all 7896 documents...