• No results found

rough surface scatter

Rough Surface Scattering via Two-Way Parabolic Integral Equation

Rough Surface Scattering via Two-Way Parabolic Integral Equation

... One-dimensional surface models are frequently used and often directly applicable in narrow angle propagation as well as for corrugated surfaces and inverse problems, but the aim should most often be methods which ...

10

Radar Image of One Dimension Rough Surface with Buried Object

Radar Image of One Dimension Rough Surface with Buried Object

... of rough surface with buried object corresponding to single incidence frequency, which cannot provide elaborate data for the detection of buried ...dimensional rough surface scattering ...

14

Radar Scatter from Layered Media and Rough Surfaces

Radar Scatter from Layered Media and Rough Surfaces

... the scatter from rough surfaces and for horizontally-stratified ...from rough surfaces can be found in closed form if plane wave incidence is assumed, but the method is valid for any realizable source ...

15

Modeling Of Tow Wrinkling In Automated Fiber Placement Based On Geometrical Considerations

Modeling Of Tow Wrinkling In Automated Fiber Placement Based On Geometrical Considerations

... the rough surface left for the finishing stage must be less or equal to the tool depth of cut in every CL point for every used ...the rough surface is defined by all CL positions and depth of ...

111

Impact of Indoor Residual Sprayed  Deltamethrin on Different Surfaces  in a Malaria Endemic Area in  Balai Ringin, Sarawak

Impact of Indoor Residual Sprayed Deltamethrin on Different Surfaces in a Malaria Endemic Area in Balai Ringin, Sarawak

... laria vectors worldwide ([10]-[12]). Results showed that the efficacy of deltamethrin mainly depends on location, concentration of insecticide used, formulation, the surface, humidity, temperature and method of ...

11

Study of unmachined area in intricate machining after rough cut in WEDM   Pages 887-892
		 Download PDF

Study of unmachined area in intricate machining after rough cut in WEDM Pages 887-892 Download PDF

... damaged surface layer with poor surface integrity is a major disadvantage of ...damaged surface layer, after rough/first cut in WEDM, some surface area remains unmachined on work ...

6

CaCO3 MICROPARTICLE CONTAINING IBANDRONATE–ALGINATE BEADS FOR IMPROVED ADHERENCE TO BISPHOSPHONATE ORAL THERAPY: FORMULATION AND IN-VITRO RELEASE

CaCO3 MICROPARTICLE CONTAINING IBANDRONATE–ALGINATE BEADS FOR IMPROVED ADHERENCE TO BISPHOSPHONATE ORAL THERAPY: FORMULATION AND IN-VITRO RELEASE

... Ibandronate is potent N containing third generation bisphosphonate. It has a core of P-C-P structure with side chains having a hydroxyl group at one side and a tertiary nitrogen group on other side [1] . Hydroxyl group ...

8

Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al Si Alloy

Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al Si Alloy

... the surface finishing and termination of many applications in mechanical wheels and found the necessity to control the termination surface well to reduce the effect of surface roughness and friction ...

7

Effects of a micro/nano rough strontium-loaded surface on osseointegration

Effects of a micro/nano rough strontium-loaded surface on osseointegration

... We found that the novel MNT-Sr surface ultimately exerted a highly beneficial effect on osseointegration in comparison with other surfaces in cellular and animal experiments. The advantages of both micro- and ...

15

Wavelet analysis of the turbulent flow over the very rough surface

Wavelet analysis of the turbulent flow over the very rough surface

... It is generally accepted that structures evolves within the transition from a laminar to a turbulent flow due to a presence of an instability ([1]). The structures are created thanks to a tiny three-dimensional turbulent ...

9

Rarefaction cloaking : influence of the fractal rough surface in gas slider bearings

Rarefaction cloaking : influence of the fractal rough surface in gas slider bearings

... the rough bearing is larger than that of the smooth ...6% rough- ness could lead to an increase of 20% more bearing load ...the rough bearing is closer to the end of the ...the rough bearing ...

11

Wetting properties on nanostructured surfaces of cicada wings

Wetting properties on nanostructured surfaces of cicada wings

... the surface under the water ...bifuscata surface, in which the solid–liquid contact area is less than that of ...the surface indicates that the water droplet is in the intermediate state of spreading ...

8

Surface Topography Measurement of Mirror-Finished Surfaces Using Fringe-Patterned Illumination

Surface Topography Measurement of Mirror-Finished Surfaces Using Fringe-Patterned Illumination

... mirror-finished surface, the image of the fringe patterns was captured by the monochrome industrial camera (TXG50, Baumer, Frauenfeld, Switzerland) and ultra- machine vision lens (M1620-MPW2, Computar, Cary, NC, ...

11

The Effectiveness of Hydrophobisation of Porous Building Materials by Using the Polymers and Nanopolymers Solutions

The Effectiveness of Hydrophobisation of Porous Building Materials by Using the Polymers and Nanopolymers Solutions

... polymer chain is composed of different structures [14], [15]. However, the macromolecule may be located in two energy states: at a solid surface or in the depths of the solution [15]. The conformation of the ...

6

Fabrication of Mechanically Stable Superhydrophobic Aluminium Surface with Excellent Self-Cleaning and Anti-Fogging Properties

Fabrication of Mechanically Stable Superhydrophobic Aluminium Surface with Excellent Self-Cleaning and Anti-Fogging Properties

... By introducing mechanical disturbances such as surface bending and folding, wettability of a superhydrophobic surface affects [51]. Therefore, the effect of bending as well as folding on superhydrophobicity ...

23

Development of structural composite products made from bamboo I: fundamental properties of bamboo zephyr board

Development of structural composite products made from bamboo I: fundamental properties of bamboo zephyr board

... from bigger zephyr strands showed a rough surface, high thickness tolerance, and scattered voids. Because of its cylindrical shape, an uneven surface, large cavity, a[r] ...

7

Surface Effects on the Scatter of SH Wave by a Shallow Buried the Elliptical Hole

Surface Effects on the Scatter of SH Wave by a Shallow Buried the Elliptical Hole

... The surface elasticity theory is applied to obtain the stress boundary conditions on the ...the surface effect has a signif- icant effect on the scattering of ...

12

Statistical Distribution of the Layered Rough Surface Index (LRSI)

Statistical Distribution of the Layered Rough Surface Index (LRSI)

... of rough interfaces under an illumination by an electromagnetic plane ...slightly rough boundaries with infinite surface areas and Gaussian centered height distributions ...

13

Regularities of Nanofocusing of the Electromagnetic Field of a Fractal Rough Surface

Regularities of Nanofocusing of the Electromagnetic Field of a Fractal Rough Surface

... real surface having a fractal geometry has been ...of surface charge and surface current do not allow to investigate the interaction of an electromagnetic wave with a rough fractal ...fractal ...

17

An Analysis of Near-Field Scattering Characteristics of Rough Target: from the Perspective of Bidirectional Reflectance Distribution Function Based on LS-SVM

An Analysis of Near-Field Scattering Characteristics of Rough Target: from the Perspective of Bidirectional Reflectance Distribution Function Based on LS-SVM

... This paper presents a new attempt to evaluate the laser scattering properties of complex targets in the near-field region based on the revised BRDF model of rough surface materials. It is worth noting that ...

9

Show all 10000 documents...

Related subjects