• No results found

steel mould

Simulation of Industrialised Building System components production

Simulation of Industrialised Building System components production

... reusable steel mould is very ...reusable steel mould to supply for the construction of medium size single storey IBS housing project ranging from 100 to 300 ...reusable steel ...

7

Integral Foam Moulding of Light Metals

Integral Foam Moulding of Light Metals

... Integral foam moulding (IFM) is an economical way to produce castings with integrated cellular structure, i.e. a solid skin and a foamed core. IFM has been known for polymers for more than four decades and is well ...

7

Modeling And Analysis Of An Injection Mould Deploying Creo Parametric And Analysis System

Modeling And Analysis Of An Injection Mould Deploying Creo Parametric And Analysis System

... in mould designing and fabrication and control of injection molding machine will lead to imperfect plastic ...a mould is very important task involving significant decisions with implications to productivity ...

8

Factors Affecting Solidification of Steel in the Mould during Continuous Casting of Steel Billets

Factors Affecting Solidification of Steel in the Mould during Continuous Casting of Steel Billets

... solidified steel thickness can be seen due to changing the thermal conductivity of the copper ...copper mould with a cheaper stainless steel mould which would withstand physical aspects more ...

5

The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene

The Influence of Processing on the Aesthetic, Morphological and Mechanical Properties of Structural Foam Mouldings of High- Impact Polystyrene

... The mouldings produced in the hybrid mould also have larger cells with a variety of shapes, as compared to the steel mould (Fig. 8). At the core, the cells of the hybrid mouldings are approximately ...

9

ESTIMATION AND VALIDATION OF INTERFACIAL HEAT TRANSFER COEFFICIENT DURING SOLIDIFICATION OF SPHERICAL SHAPED ALUMINUM ALLOY (AL 6061) CASTING USING INVERSE CONTROL VOLUME TECHNIQUE

ESTIMATION AND VALIDATION OF INTERFACIAL HEAT TRANSFER COEFFICIENT DURING SOLIDIFICATION OF SPHERICAL SHAPED ALUMINUM ALLOY (AL 6061) CASTING USING INVERSE CONTROL VOLUME TECHNIQUE

... Zhang (Zhang et al., 2017) conducted a detailed study for a heat transfer phenomena on the solidification of 5 step squeeze casting of wrought aluminum alloy with a different hydraulic pressure. The authors observed that ...

7

Manufacturing, Assembly And Trial Of Core And Cavity Plastic Injection Mould For Two-Plate Family Mould Testing Specimens

Manufacturing, Assembly And Trial Of Core And Cavity Plastic Injection Mould For Two-Plate Family Mould Testing Specimens

... The mould material usually focus on two main parts that is base plate, and core & cavity ...of mould based on custom requirements that provide custom desired ...this mould, Plastic Injection ...

24

Intensification of Mechanical Properties of the Investment Shell Using Camphor

Intensification of Mechanical Properties of the Investment Shell Using Camphor

... In investment casting process ceramic coating is done on the pattern made by wax, plastics, frozen mercury, tin and ice. Fabrication of investment slurry is prepared by refractory flour and binder. These ingredients are ...

5

A biologically inspired network design model

A biologically inspired network design model

... A network design problem is to select a subset of links in a transport network that satisfy passengers or cargo transportation demands while minimizing the overall costs of the transportation. We propose a mathematical ...

15

Review on Mould Contamination and Hygrothermal Effect in Indoor Environment

Review on Mould Contamination and Hygrothermal Effect in Indoor Environment

... for mould growth. Based on the suita- bility for mould growth, various building materials were classified into four cat- egories by Sedlbauer [14]: Class 0 is the culture medium in laboratory condition ...

11

Development Of Die For the Production Of Plastic Container

Development Of Die For the Production Of Plastic Container

... The purpose of this project is to understand the development of die for the injection moulding machine. The injection moulding is one of the popular manufacturing process amongst the existing processes in which the parts ...

6

Effect of Low Temperature Plasma Nitriding on Salt Spray Corrosion and Electrochemical Corrosion of H13 Hot Work Mould Steel

Effect of Low Temperature Plasma Nitriding on Salt Spray Corrosion and Electrochemical Corrosion of H13 Hot Work Mould Steel

... In this study, a nitrided layer was fabricated on H13 hot work mould steel using a low temperature plasma nitriding (LTPN). The morphologies and phases of obtained nitrided layer were analyzed using a ...

12

IMPROVEMENT IN PRODUCTIVITY OF CASTINGS BY SWITCHING FROM GREEN SAND MOULD PROCESS TO SHELL MOULD PROCESS

IMPROVEMENT IN PRODUCTIVITY OF CASTINGS BY SWITCHING FROM GREEN SAND MOULD PROCESS TO SHELL MOULD PROCESS

... Significant amount of work has been done in the field of castings and their types. According to S. Jones, C.Yuan [03] the investment casting technique has tremendous advantages in the production of quality components and ...

11

Computer Aided Mould Design

Computer Aided Mould Design

... this, mould making is an important supporting industry due to its related products represents more than 70% among the components in consumer products ...in mould industries ...

24

Tensile Behaviour and Microstructure of Permanent Mould Cast Magnesium Alloy AJ62 Subject to Corrosion

Tensile Behaviour and Microstructure of Permanent Mould Cast Magnesium Alloy AJ62 Subject to Corrosion

... The thin layer frozen along the mould wall is often referred to as the skin [27]. Skin material is assumed to be primarily responsible for an HPDC casting’s integrity [28]. Because the interior region of the ...

131

A Study of Injection Moulding with Bismuth Alloy

A Study of Injection Moulding with Bismuth Alloy

... Although the melting point of plastic PE I20 ma- terial is 165C and exceeds the melting point of bis- muth MCP melts at 137C alloy, due to automatic cooling, the mould temperature was kept around 40- 45C during ...

8

Internship report

Internship report

... Figure 30 displays the state where the mould spacing is still 7 mm. From this figure we notice more and larger wrinkles occurring across the laminate. This is in better agreement with Figure 31, which displays the ...

71

Permanent Mould Thin Slab Casting and Heat Tretment of 8% Chromium Cold Work Tool Steel (AISI DC 53)

Permanent Mould Thin Slab Casting and Heat Tretment of 8% Chromium Cold Work Tool Steel (AISI DC 53)

... permanent mould casting (rapid solidification), hot rolling and heat treatment processes to manufacture AISI DC 53 cold work tool steel, has been ...copper mould instead of traditional ingot ...

16

Design And Development Casting Mould For Resin Based Medals

Design And Development Casting Mould For Resin Based Medals

... Secondly, I would like to express greatest thankfulness and appreciation Mr. Syahrul, Mr. Syafik and all the technicians who have given advice, suggestion, guideline and information about design process for this project ...

24

A Precision Assembly In Plastic Injection Mould

A Precision Assembly In Plastic Injection Mould

... Injection Mould” mohon dikelaskan sebagai terhad untuk tempoh lima (5) tahun dari tarikh surat ini memandangkan ia mempunyai nilai dan potensi untuk dikomersialkan di masa ...

24

Show all 10000 documents...

Related subjects