Steel Stiffened-Plate Structures
Three Dimensional Thermo Elastic Plastic Finite Element Method Modeling for Predicting Weld Induced Residual Stresses and Distortions in Steel Stiffened Plate Structures
... in steel stiffened-plate ...varying plate thickness and weld bead length (leg length) in welded plate panels, the latter being associated with weld heat ...of steel ...
25
Experimental Compression Behavior of Stiffened Steel-Plate Concrete(SSC) Structures under Compressive Loading
... the stiffened steel plate concrete (SSC) ...between steel plate and concrete was ...SSC structures was suggested based on the compression test ...SSC structures supported ...
8
Performance-based Design of Stiffened Steel Plate Concrete Wall in Fire
... surface steel plates encasing concrete shown in ...surface steel plate not only to prevent the displacement of un- stiffened steel plate concrete (USC) module during construction ...
9
The application of reliability methods in the design of stiffened FRP composite panels for marine vessels
... vessels, stiffened plates are the most commonly used structural elements, forming the deck, bottom hull, side shells and ...of stiffened marine composite panels as part of a current research programme into ...
21
Behaviour of Flat Slab by Varying Stiffness in High Seismic Zone
... i) Drakshayani S, Chaithra N, “Seismic performance of RC flat slab structure with different types of steel bracing” International Journal of Research in Engineering and Technology eISSN: 2319-1163, pISSN: ...
7
Application of Random Search Method for the Optimal Designing of Ribbed Plates
... of plate with two ribs subjected the action of the first harmonic of a uniformly distributed load q 100 kN / m, applied in the plane of the ribs ...mm, plate thickness 2 and 3 ...
6
Compressive characteristics of steel plate-concrete structures using eco-oriented cement concrete
... The main objective of this study is to describe the compression of steel plate-concrete (SC) walls using eco-oriented cement concrete behavior, and to determine the squash load. The major parameters in this ...
11
Numerical Investigations on Steel Plate Shear Walls – Stiffened and Un-stiffened
... a steel plate shear wall is an effective and economical lateral load resisting system against both wind and earthquake ...infill steel plates having length of one bay and height of one ...be ...
10
Numerical Optimization of Cold Formed Closed Built-up Steel Column
... In this study pin end conditions are used as shown in Figure 03(c) to Figure 03(d). At the unloaded end, translations in all the directions are restrained as well as the rotation about the longitudinal direction. But in ...
5
Advance Bracing system for steel structures
... In this paper Braced frame systems are utilized in steel construction. This system is a highly efficient and economical system for resisting horizontal loading, and attempts to improve the competence of a rigid ...
5
Ice Strengthening of Great Lakes Bulk Carriers
... Replace plate with "Hi-S" steel Replace plate with "Hi-S" steel, extend stringers & add intermediate frames Replace plate with "Hi-S" steel, added breast hooks and plate stiff's Replace [r] ...
36
Distributions of Welding-Induced Residual Stresses in Steel Plate Structures
... depth of 1.1 mm the peak tensile stress at the first welded is 390 MPa and for the second .. welded it was 430 MPa which is a decrease of 9%, at the 5.0 mm depth the ch[r] ...
281
Experimental analysis of stiffened and un stiffened flat plate used in log splitting machine
... Plate dimension-square plate of length 480mm and thickness 10mm. It is having a centre hole of diameter 75mm. It is fixed at the corners with help of nut and bolts. The hole diameter is 11mm. The axial ...
6
End plate connections and their influence on steel and composite structures
... 2 STRENGTHS : YIELD STRENGTHS OF STEEL BEAM: YIELD STRENGTHS OF STEEL COLUMN: YIELD STRENGTH OF END PLATE: ULTIMATE STRENGTH OF BOLTS: YIELD STRENGTHS OF REINFORCEMENT: CUBE STRENGTH OF [r] ...
499
Design of a wall latching device
... distance is more complicated due to non-linearity. The force drops off rapidly over distance from the wall. Normally, a mathematical model should be made to get an idea of the magnet’s force versus displacement curve and ...
33
Seismic Retrofit of Flat Plate Structures
... model structures failed by punching shear of column-slab ...by steel plate to prevent punching shear ...of steel braces were most effective in increasing stiffness as well as strength, and the ...
13
Measuring method of elastic wave velocity of inside concrete of steel plate reinforced concrete structures
... the steel plate surface with an impactor (rigid ball) and are measured by a ...the steel plate and the concrete, even if the concrete was sufficiently consolidated ...onto steel ...
9
Publications of the European Communities 1986, Part A
... Euronorm: Steel plate, sheet and strip with elevated temperature properties Technical delivery conditions 2885 Euronorm : Ultrasonic testing of steel plate of thickness equal to or [r] ...
82
Investigation on the Behaviour of Stiffened Concrete Filled Double Skin Steel Tubes
... skin steel tubes with a new arrangement of inner skin and stiffener are presented in this ...between stiffened and unstiffened concrete filled steel tubes (CFST and S-CFST), concrete filled double ...
7
Miniature mobile sensor platforms for condition monitoring of structures
... non-destructive evaluation (NDE) of ferromagnetic materials is described. The sensor configuration enables two inspection modes - magnetic (flux leakage and eddy current) and non-contact ultrasound. Each is designed to ...
9