• No results found

three-dimensional finite element method

Applications of Three Dimensional Finite Element Method in Orthodontics

Applications of Three Dimensional Finite Element Method in Orthodontics

... 3D finite element method in ...3D finite element in orthodontics were ...3D finite element method in orthodontics have been described in a systematic ...

5

Evaluation of Principal strain and its direction due to three dimensional finite element stresses during Impact of structural dynamic load

Evaluation of Principal strain and its direction due to three dimensional finite element stresses during Impact of structural dynamic load

... the three dimensional finite element method and based on the above case studies the finite element strain , stress and direction were estimated were listed in the result ...

15

Three-Dimensional Finite Element Analysis of Material Nonlinearity

Three-Dimensional Finite Element Analysis of Material Nonlinearity

... The three dimensional finite element method is very appropriate methodology in order to unfold the differences between the linear and nonlinear effect by considering plasticity ...

9

Modeling of the Absorption of the  Electromagnetic Wave Energy in the  Human Head Induced by Cell Phone

Modeling of the Absorption of the Electromagnetic Wave Energy in the Human Head Induced by Cell Phone

... of three dimensional finite element method h adaptive code for efficient and accurate solution of the challenging engineering problem of heating of the human head induced by the ...

6

A three dimensional inverse finite element method applied to experimental eddy current imaging data

A three dimensional inverse finite element method applied to experimental eddy current imaging data

... used method for the image reconstruction in electrical impedance tomography (EIT) is a regularized Gauss–Newton ...This method has been studied for magnetostatic permeability tomography using simulated data ...

8

Finite element method for two-dimensional elasticity problem

Finite element method for two-dimensional elasticity problem

... using finite element method for grid rectangle shape ...of element. Recent comparisons with every element show the different flux and temperature for every nodal point with surprising ...

16

Finite Element Analysis of EA 113 Gasoline Engine Connecting Rod

Finite Element Analysis of EA 113 Gasoline Engine Connecting Rod

... the finite element method, the three-dimensional model of four-cylinder four-stroke gasoline engine connecting rod was established and then the stiffness and stress distribution and ...

6

A new method for the treatment of unilateral posterior cross-bite: a three-dimensional finite element stress analysis study

A new method for the treatment of unilateral posterior cross-bite: a three-dimensional finite element stress analysis study

... the finite element models and the actual situ- ation owing to material properties and boundary con- ditions, the results of the FEM studies should be deciphered with ...

9

Two Dimensional and Three Dimensional Finite Element Analysis of Finite Contact Width on Fretting Fatigue

Two Dimensional and Three Dimensional Finite Element Analysis of Finite Contact Width on Fretting Fatigue

... layer method is developed to save the efforts of computational time and post process keeping with 3D boundary ...proposed method involves obtaining traction distributions from a relatively coarse 3D FEA ...

8

Moisture-induced stresses in engineered wood flooring with OSB substrate

Moisture-induced stresses in engineered wood flooring with OSB substrate

... The finite element method is a useful tool to predict the behavior of EWF [3, ...a three-dimensional (3D) finite element model of the hygromechanical cupping in layered ...

9

Three‑Dimensions Modelling of a Jet Pile Construction in the Karolinka Dam

Three‑Dimensions Modelling of a Jet Pile Construction in the Karolinka Dam

... presents threedimensional modelling of a jet pile construction, by using finite element method which is performed by Plaxis ...

12

Three Dimensional Nonlinear Finite Element Analysis of Airport Pavements.

Three Dimensional Nonlinear Finite Element Analysis of Airport Pavements.

... The Finite Layer method is also based on assuming similar material properties in layers which is not always true especially in stress dependent materials since the stresses will not necessarily be the same ...

221

TORQUE ANALYSIS OF THREE-PHASE INDUCTION MOTOR UNDER VOLTAGE UNBALANCE USING 2D FEM

TORQUE ANALYSIS OF THREE-PHASE INDUCTION MOTOR UNDER VOLTAGE UNBALANCE USING 2D FEM

... benefits, three-phase induction motors are used extensively in industry, commercial and residential applications and most of them are connected to electric power distribution system directly, thus they will be ...

6

Optimizing Dental Implant Model by Comparison of Three Dimensional Finite Element

Optimizing Dental Implant Model by Comparison of Three Dimensional Finite Element

... The Finite Element Method (FEM) to compute single- and multiphysics ...the finite element method, it is important to remember that the accuracy of our solution is linked to the ...

9

Finite element simulation of three-dimensional free-surface flow problems

Finite element simulation of three-dimensional free-surface flow problems

... adaptive finite element algorithm is described for the stable solution of three-dimensional free-surface-flow problems based primarily on the use of node ...Two three-dimensional ...

23

Construction and validation of a three-dimensional finite element model of degenerative scoliosis

Construction and validation of a three-dimensional finite element model of degenerative scoliosis

... Finite element analysis is a method of computer simu- lation in which the reference data is usually obtained from traditional ...a finite element model. The validation of a ...

7

Estimates for the pressure and thermal distortions of coating dies for use in design and simulation

Estimates for the pressure and thermal distortions of coating dies for use in design and simulation

... using finite element ...two- dimensional finite element analysis predictions obtained using ANSYS in plane strain ...and finite element analysis results are further ...

82

Design and structural optimisation of a tractor mounted telescopic boom crane

Design and structural optimisation of a tractor mounted telescopic boom crane

... testing, three-dimensional (3D) computer-aided design and finite-element method (FEM)-based analysis procedures, structural optimisation strategy, physical proto- typing, physical ...

16

Research on the Microscopic Mechanism of the Bond Breakage of Cemented Carbide Tools

Research on the Microscopic Mechanism of the Bond Breakage of Cemented Carbide Tools

... generated three-dimensional WC grains using the Voronoi method and inserted the Co binder phase between the WC-WC particles to establish a three-dimensional model suitable for modelling ...

17

Three Dimensional Finite Element Analysis of Wire Drawing Process

Three Dimensional Finite Element Analysis of Wire Drawing Process

... slab method (SM) and finite element method ...accurate method than SM because the obtained results with it are nearer to the real ...the finite element method to ...

12

Show all 10000 documents...

Related subjects