Thus from the above research, after the analysis, it can be concluded that subordinates disagree that Biometric timekeeping is beneficial but it can be said that biometric timekeeping helps employees to start your work on scheduled time. Also biometric timekeeping restricts employees to work on in scheduled work hours. Biometric timekeeping does not motivate employees to work efficiently. Additionally it was evident that employees are dissatisfied with current biometric late mark system for which flexible timing systems can be adopted in the organization to motivate employees to work.
The paper reports the study of a special Sundial installed in the Jaisalmer fort in 1861 CE. It reveals that the graduation is based on the traditional Indian system of time-keeping. The divisions represent equal time intervals of 24 minutes corresponding to one ghai. An attempt has been made to estimate the accuracy of the dial readings through our own observations.
The Ogren Group believes that all organizations with complex or high performance networks should be using firewall analysis technology to automate rule change procedures for cost savings, attest that compliance with security policy is maintained before committing to rules changes, and assure that security holes are not created with ineffective firewall rules. Organizations rely on firewalls to establish secure application paths to users, and Firewall Analysis is critical to save time and energy in keeping those application paths clear. Ogren Group recommendations to enterprises include:
information, GPS receivers could isolate the true signal above the noise of the jammer. They could even let navigation survive partial destruction of the satellite network; whereas present-day receivers must triangulate their positions from four or more satellites simultaneously, a good enough clock could instead use successive signals from a single satellite. Other defence applications include frequency-hopping communication, bistatic radar (in which an attacker stealthily acquires a radar signal from a target illuminated by a distant transmitter), and sensitive monitoring of enemy communications. For these reasons, portable clocks are of great interest to militaries in several countries. Finally, there may be completely new applications. For example, warehouses, postal depots, and even subways may in future be equipped with their own local positioning systems using small-scale wireless base stations. Parcels, equipment, and people could then be tracked via time-of-flight of radio signals. Even driverless cars would benefit from an on-board accurate timekeeping device especially in challenging terrains, such as tunnels, where satellite GPS signal is weak.
A biometric time attendance system is a biometric time clock that tracks employee attendance, including when they clock in, when they clock out, and if they showed up when they were scheduled to work. What makes a biometric time clock one of the best time and attendance systems is that it has a biometric fingerprint scanner built in that is much more accurate in timekeeping that a time card or time sheets because employees can't clock in other employees. This helps prevent time theft and saves money for the company.
Depending on the practice setting, teams may document in one centralized chart or maintain their own profession-specific records separately. Centralized records require OTs to confirm or determine up front who will assume the responsibility of health information custodian and accountability for the administration of the health record. Understanding or establishing organizational policies and procedures for record maintenance and future access by the OT should he or she leave the practice setting is essential to clarify expectations for all elements of record keeping.
U. "Wetlands" means an area that has water at or near the surface of the ground at some time during the growing season (wetland hydrology). It contains plants that are adapted to wet habitats (hydrophytic vegetation) and is made up of soil that has developed under wet conditions (hydric soils) or any other definition promulgated by the Commission.
From the initial drawings, through to completion and the final hand over, we take total responsibility for every aspect of our work, ensuring we meet with the exacting standards of our clients at all times. Each project is headed up by a Contracts Manager who takes responsibility for his project team and also ensures the project is delivered right first time and on time. A member of the team will attend regular site meetings to check on progress, discuss any design or programme changes and liaise with the client and other contractors on site.
With a large, flexible fleet and a network of depots throughout the world, we provide a reliable and secure source of treated water 24/7, 365 days a year – for as long as it is needed, with rapid response and easy set-up, every time, for complete peace of mind.
The occupational therapist, if he or she is the Health Information Custodian, will establish a process for retention and destruction of records that ensures that records are maintained for the required period of time and are destroyed in an appropriate manner and in accordance with jurisdictional legislated retention and destruction requirements. If the occupational therapist is not the Health Information Custodian, they will ensure that the record is maintained and that they will have access to it during the minimum retention period and be knowledgeable about the organization's policies and procedures for retention and destruction of the occupational therapy records.
Inkjet printing technology also has great potential in ﬂat panel display applications. 2) Organic light-emitting diodes (OLEDs) are one of the most promising ﬂat panel technol- ogies for the future. However, due to the limited selection of materials, they are usually fabricated by thin ﬁlm deposition and evaporation process with subsequent patterning through lithography. The processes, along with the required masks, are very complicated and expensive. Tremendous beneﬁts can be obtained if arrays of organic light emitting materials can be deposited directly by inkjet printing methods. The current practice for polymer light emitting diodes (PLEDs) is deposition through spin coating. However, this is restricted to the fabrication of a single color. With the application of inkjet printing technology, it is possible to deposit tiny pixels of red, green, and blue elements at the same time to produce the color ﬁlters. Compared to the spin coating process, inkjet printing technology has the beneﬁts of high resolution, low cost, simpler processing, a high yield of materials utilization and the capability to produce large panels. Inkjet printing technology also provides a unique process for the fabrication
3. In other cases where the same does not result in the creation of any capital asset or where the same is not allocable over defined future time periods there can be no case for amortizing the same under the Act over the expected period over which the benefit is likely to arise there from since in such cases the expenditure is essentially revenue in nature but is amortized in the books only on account of some other considerations.
G ood science requires good record keeping. Good record keeping promotes both ac countability and integrity in research. Good re cords are complete, accurate and understandable to others. Records of research activities should be kept in sufficient detail to allow another scientist skilled in the art to repeat the work and obtain the same results. Each member of a research group is responsible for his/her own research records while the principal investigator has the ultimate responsibility for the labora tory’s records. It is also helpful to remember that any records of research conducted by NIH scientists are the property of the NIH.
Trend Micro™ Smart Protection Network is a next-generation cloud-client content security infrastructure designed to protect customers from security risks and Web threats. It powers both on-premise and hosted solutions to protect users whether they are on the network, at home, or on the go. Trend Micro Smart Protection Network uses light-weight clients to access its unique in-the-cloud correlation of email, Web and file reputation technologies, as well as threat databases. Protection is automatically updated and strengthened as more products, services and users access the network, creating a real-time neighborhood watch protection service for those who use it. The smart scan solution uses the Smart Protection Network for in-the-cloud protection.
It is therefore a mark of the neocolonialist tendencies that continues to colour and underpin Nigeria’s foreign policy permutation and execution that the country still finds it necessary to keep and nuture its membership of what is purely a historical relic. Needless to say the Commonwealth symbolizes the attempted recrudescence of an imperial power that is spent and relegated to the background. One therefore wonders how Chief olusegun Obasanjo’s hosting of a meeting of such an organization or his championing of Nigeria’s membership into that could have amounted to something that should be recorded on the positive side for him. If anything that he sought to keep Nigeria within the Commowealth; that he hosted such a meeting in which millions of the hard earned tax payers’ money was wasted (and this within the matrix of the abject poverty that is pillaging the land) is one more proof that the country was in the deepest quagmire of neocolonialist exploitation at the time.
a major step towards the design of the station- keeping algorithm. Two initial state vectors, one that belongs to a periodic orbit, which is the out- come of the solved two-point boundary value prob- lem, and the second one afflicted with errors intro- duced by the propagation of two revolutions down- stream are used. Fig. 7 shows the outcome of the optimisation for the unperturbed, whereas Fig. 8 for the perturbed case. For visualisation purposes the lifetime, manoeuvre direction, and the associ- ated error on the next xy-plane crossing are evalu- ated over a wide range manoeuvre magnitudes. No optimisation is required for the results in Fig. 7 and Fig. 8. The optimisation results are marked with a vertical dashed lines. There is a precise error mea- surement available for periodic orbit as the state on the xy-plane maintains on every return. The euclidean distance d cmf between the initial state
Fig. 2 also shows the cross-sectional SEM micrograph of the heat-treatment compacts, which were fabricated with various milling times, from 0 s to 144 ks, respectively. Generally, the relative density increases with increasing sintering temperature. Moreover, the milling time also has a remarkable influence on the relative density of the sintered composites. As the milling time increased, the relative density of the sintered SiC- ZrO 2 (Y 2 O 3 ) composites also increased at