• No results found

total strain

Finite element modeling of occlusal variation in durophagous tooth systems

Finite element modeling of occlusal variation in durophagous tooth systems

... in total strain energy (J), first principal strain and the distribution of strains in a diversity of canonical durophagous tooth ...and strain measurements for most models, there is a marked ...

7

Finite Element Simulation of a Doubled Process of Tube Extrusion and Wall Thickness Reduction

Finite Element Simulation of a Doubled Process of Tube Extrusion and Wall Thickness Reduction

... shear strain and the magnitude of the extrusion load were investigated and simulated with the finite element method using Q Form software ...redundant strain, the total strain and the finite ...

9

Experimental research on the low cycle fatigue characteristics of nickel base welds at room temperature

Experimental research on the low cycle fatigue characteristics of nickel base welds at room temperature

... plastic strain amplitudes exhibited cyclic softening characteristics at higher total strain amplitudes ...lower strain level, which decreased as the strain amplitude and the number of ...

10

Mechanical Behaviour Modelling of an Mg Stabilized Zirconia Reinforced TRIP Matrix Composite under Cold Working Conditions

Mechanical Behaviour Modelling of an Mg Stabilized Zirconia Reinforced TRIP Matrix Composite under Cold Working Conditions

... Using the proposed method of prediction for the total strain of the composite see Equation 7 and based on the mixture rule to determine the level of total stress see Equation 1 stress-st[r] ...

12

Fatigue Failure of Notched Specimen—A Strain Life Approach

Fatigue Failure of Notched Specimen—A Strain Life Approach

... multiaxial cyclic loading using finite element analysis studied by Guo-Qin Sun, De-Guang Shang, 2010 [24]. Here, Life prediction for GH4169 super-alloy thin tubu- lar and notched specimens were investigated under pro- ...

11

Design and Thermal Analysis of Radial Turbo Charger Using Finite Element Method

Design and Thermal Analysis of Radial Turbo Charger Using Finite Element Method

... cyclic strain result in complex thermo- mechanical fatigue (TMF) ...maximum strain occurs at the maximum temperature and in out-of-phase loading (OP) the maximum strain occurs at the minimum ...and ...

10

Production of folate by lactobacillus and bacillus cereus isolated from cow milk

Production of folate by lactobacillus and bacillus cereus isolated from cow milk

... of 150 µg/ml in a folate medium. Similarly MK-4 strain was showed relatively decreased production of 50-60 µg/ ml respectively. The folate contents in yoghurts commercially available in the netherlands varied ...

7

Assessment of Waste Dump Slope Stability at Iron Ore Mines

Assessment of Waste Dump Slope Stability at Iron Ore Mines

... Here from the Table 7, it is ascertained that factor of safety from both the software analysis are more or less same and marginally stable at dump height 32 m which is 1.29. Again if we increase the dump height, factor ...

17

A novel simulation for the design of a low cycle fatigue experimental testing programme

A novel simulation for the design of a low cycle fatigue experimental testing programme

... the strain magnitude history ...different strain response and through monitoring this, the accuracy of the location of the boundaries can be ...shakedown strain response increases linearly to a ...

27

Gurson Damage Analysis with an Arbitrary Lagrangian-Eulerian Formulation

Gurson Damage Analysis with an Arbitrary Lagrangian-Eulerian Formulation

... Gurson model[1,2] considers that the loss of strength and stiffness under high plastic straining is due to micro voids that nucleate and grow inside the metallic matrix. The model involves two major components: a yield ...

8

Effect of Annealing Temperature on Microstructure and Superelastic Properties of Ti Au Cr Zr Alloy

Effect of Annealing Temperature on Microstructure and Superelastic Properties of Ti Au Cr Zr Alloy

... Cyclic loading-unloading tensile tests were carried out to reveal the effect of annealing temperature on the super- elasticity of Ti-4Au-5Cr-8Zr alloy. Figure 7 shows stress­ strain curves of the (a) AT1173, (b) ...

6

The behaviour of a stiff clay behind embedded integral abutments

The behaviour of a stiff clay behind embedded integral abutments

... Currently, no design standard or guidance has been published specifically on the earth pressure behind full-height embedded integral abutments in stiff clay. In practice, such abutments are sometimes treated as embedded ...

42

Function of the hypobranchial muscles and hyoidiomandibular ligament during suction capture and bite processing in white spotted bamboo sharks, Chiloscyllium plagiosum

Function of the hypobranchial muscles and hyoidiomandibular ligament during suction capture and bite processing in white spotted bamboo sharks, Chiloscyllium plagiosum

... muscle strain, two 1 mm piezoelectric crystals (Sonometrics Corporation, London, ON, Canada) were surgically implanted into the CM, CH and CA through 1 – 2 mm incisions in the skin ...

13

Effects of Protoplast Fusion on δ-endotoxin Production in Bacillus thuringiensis Spp. (H14)

Effects of Protoplast Fusion on δ-endotoxin Production in Bacillus thuringiensis Spp. (H14)

... The total protein concentration in fusion strain, in different times of experiments, was higher than wild ...in total proteins was confirmed with specific anti-sera against the toxin by SRID ...

5

Slope Stability Assessment of Saptashrungi Gad Temple, Vani, Nashik, Maharashtra,  India—A Numerical Approach

Slope Stability Assessment of Saptashrungi Gad Temple, Vani, Nashik, Maharashtra, India—A Numerical Approach

... shear strain and total displacement pattern along the slope ...shear strain varies from 0.0003 to 0.0017 and the maximum total displacement varies from ...

13

Efficacy of Purple Non Sulphur Bacterium Rhodobacter sphaeroides Strain UMSFW1 in the Utilization of Palm Oil Mill Effluent

Efficacy of Purple Non Sulphur Bacterium Rhodobacter sphaeroides Strain UMSFW1 in the Utilization of Palm Oil Mill Effluent

... The total nitrogen in settled the POME may be limiting factor for the growth of some species of microorganisms, but the organism can ...sphaeroides strain UMSFW1 during the experi- mental ...

12

Survey for the occurrence of Gluconacetobacter Diazotrophicus from the sugarcane grown coastal saline soils of Nagapattinam district of Tamil Nadu

Survey for the occurrence of Gluconacetobacter Diazotrophicus from the sugarcane grown coastal saline soils of Nagapattinam district of Tamil Nadu

... A range of 0.57 percent to 1.14 percent of the total bacterial population was observed in the survey. In the present study, twenty cultures of Gluconacetobacter diazotrophicus NGDZ-1 to NGDZ-20were isolated from ...

5

Strain Improvement Studies on T. Thalpophilus strain KS-05

Strain Improvement Studies on T. Thalpophilus strain KS-05

... for strain improvement as it induces linked multiple mutations at fairly high ...for strain improvement programs as the fewer survivors in the treated sample would have undergone repeated or multiple ...

7

Finite Element Analysis of Drum Brake by using ANSYS

Finite Element Analysis of Drum Brake by using ANSYS

... From above result we can conclude that beside general materials such as cast iron, aluminum metal matrix 2 shows less value of deformation as well as maximum von-mises stress under static structural analysis. Thermal ...

12

Reduction of Vibrations in a Vertical Axis Wind Turbine using Blade Design Modification

Reduction of Vibrations in a Vertical Axis Wind Turbine using Blade Design Modification

... 3. The Total deformation varies randomly over the modes of vibration. This is undesirable while designing a VAWT subject to vibration constraints, because in case the turbine is designed for the third mode, it ...

7

Show all 10000 documents...

Related subjects