• No results found

turbine rotor speed changes

Designing and Modeling of Control Strategies Based on Multi-Objective Optimization for a Permanent-Magnet Synchronous Generator Wind Turbine: A Study Based on the Grid Errors and Wind Speed

Designing and Modeling of Control Strategies Based on Multi-Objective Optimization for a Permanent-Magnet Synchronous Generator Wind Turbine: A Study Based on the Grid Errors and Wind Speed

... wind turbine emulator (WTE) to develop and examine new control strategies for wind energy conversion ...the changes of wind speed and turbine parameters and supervision over system variables ...

10

Comparative analysis of binning and support vector regression for wind turbine rotor speed based power curve use in condition monitoring

Comparative analysis of binning and support vector regression for wind turbine rotor speed based power curve use in condition monitoring

... measured rotor power curves, see figure ...to changes in conditions in time which are critical to early fault ...wind turbine condition ...in rotor curve estimation, however, the accuracy of ...

7

Voltage and Frequency Control of Self Excited Induction Generator Feeding Stand-Alone AC Loads

Voltage and Frequency Control of Self Excited Induction Generator Feeding Stand-Alone AC Loads

... for changes in rotor speed and ...the changes in rotor speed or load on the generator while maintaining a near constant voltage and frequency at the load ...

8

Robust controller design for speed regulation of a flexible wind turbine

Robust controller design for speed regulation of a flexible wind turbine

... wind turbine model by variations in the elements of the state space matrix comprising of mass, stiffness and damping ...generator speed is regulated with changes in the rotor collective blade ...

10

A decision Tree Based Approach for Data Analysis and Fault Prediction For Wind Turbine Using SCADA dataset

A decision Tree Based Approach for Data Analysis and Fault Prediction For Wind Turbine Using SCADA dataset

... wind turbine control systems are avoidance of excessive mechanical loads, maximisation of energy capture, and the provision of appropriate power ...wind turbine is basically designed to maintain vibrations ...

10

A preliminary comparison of different turbine architectures for a 100 kW supercritical CO2 Rankine cycle turbine

A preliminary comparison of different turbine architectures for a 100 kW supercritical CO2 Rankine cycle turbine

... different turbine architectures, namely radial, single-stage axial and two-stage axial ...preliminary turbine designs are shown, as viewed from the meridional ...maximum rotor-inlet blade height ...

12

Comparative analysis of binning and support vector regression for wind turbine rotor speed based power curve use in condition monitoring

Comparative analysis of binning and support vector regression for wind turbine rotor speed based power curve use in condition monitoring

... measured rotor power curves, see figure ...to changes in conditions in time which are critical to early fault ...wind turbine condition ...in rotor curve estimation, however, the accuracy of ...

6

THE CHARACTERISTICS OF THE OPERATING PARAMETERS OF THE VERTICAL AXIS WIND TURBINE FOR THE SELECTED WIND SPEED

THE CHARACTERISTICS OF THE OPERATING PARAMETERS OF THE VERTICAL AXIS WIND TURBINE FOR THE SELECTED WIND SPEED

... the turbine to be regulated over a wide range of values (of the main shaft or of the turbine) depending on wind speed and ...the turbine in the event of high ...of turbine rotor ...

8

A Novel 5-level front-end bidirectional diode clamped AC-DC-AC converter

A Novel 5-level front-end bidirectional diode clamped AC-DC-AC converter

... wind speed, maximum output power of wind turbine is obtained in different speed of the ...generator speed must be adjusted according to instantaneous wind speed to obtain incident ...

12

Effect of Singularities in Turbine blade Natural Frequency

Effect of Singularities in Turbine blade Natural Frequency

... for turbine units under repair which uses a small sized vibrator and a multichannel automated system for vibration control and ...the turbine-foundation-base system and of the turbine stator ...

7

ANALYSIS OF EFFECTIVENESS OF USING SIMPLE QUEUE WITH PER CONNECTION QUEUE (PCQ) 
IN THE BANDWIDTH MANAGEMENT (A CASE STUDY AT THE ACADEMY OF INFORMATION 
MANAGEMENT AND COMPUTER MATARAM (AMIKOM) MATARAM)

ANALYSIS OF EFFECTIVENESS OF USING SIMPLE QUEUE WITH PER CONNECTION QUEUE (PCQ) IN THE BANDWIDTH MANAGEMENT (A CASE STUDY AT THE ACADEMY OF INFORMATION MANAGEMENT AND COMPUTER MATARAM (AMIKOM) MATARAM)

... This paper presents a nonlinear control of doubly fed induction generator (DFIG) integrated with a wind system. Initially, we propose a model of wind turbine and generator in order to apply the Field Orientation ...

8

Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem

Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem

... as speed control of variable-speed WTs, blade design, what kind of power that should be used as a common basis for comparison, selection of maximum de profile, missing facts regarding the base assumptions ...

11

MATLAB Simulation Model of Hybrid Wind Solar Energy System using MPPT Algorithm using a Converter Topology

MATLAB Simulation Model of Hybrid Wind Solar Energy System using MPPT Algorithm using a Converter Topology

... The turbine rotor speed is the fundamental determinant of mechanical yield from wind vitality and Solar cell working voltage on account of yield control from sun powered ...wind turbine for ...

7

Improved cost energy comparison of permanent magnet generators for large offshore wind turbines

Improved cost energy comparison of permanent magnet generators for large offshore wind turbines

... Results from the MATLAB model for the DDPMG are shown in Figure 4. The results shown include voltage and current levels, the wind turbine power curve, the system efficiency and losses. The system efficiency takes ...

8

Management of Green Supply Chain: Need of Hours

Management of Green Supply Chain: Need of Hours

... A block diagram has been given here for better understanding of the model proposed. The proposed model has been designed with two rotors, each rotor possessing 3 blades. Each rotor has separate brake discs, ...

5

Vol 5, No 7 (2017)

Vol 5, No 7 (2017)

... variable speed wind ...constant rotor position is dispensed with as every one of the counts are done in the stator reference ...less speed estimator is actualized, which empowers the breeze ...

5

Performance characteristics of a Vertical Axis Wind Turbine (VAWT) under transient conditions

Performance characteristics of a Vertical Axis Wind Turbine (VAWT) under transient conditions

... wind turbine featuring five equally spaced NACA 0015 profile ...The turbine measures ...on turbine performance with and without guide vane arrangement has been ...the turbine with guide vane ...

13

Assessment of the suitability of ferrite magnet excited synchronous generators for offshore wind turbines

Assessment of the suitability of ferrite magnet excited synchronous generators for offshore wind turbines

... generator rotor does not appear to make a significant change to the energy capture of the ...generator rotor inertias when the mean wind speed is ...

9

Gaussian process power curve models incorporating wind turbine operational variables

Gaussian process power curve models incorporating wind turbine operational variables

... of power curves is important for accurate forecasting of power from wind turbines and also for reducing O&M cost through early detection of changes in performance. Several techniques have been used for power ...

12

Abstract: This paper presents an optimization model for rotor design of 750 kW horizontal axis wind turbine. The wind

Abstract: This paper presents an optimization model for rotor design of 750 kW horizontal axis wind turbine. The wind

... This paper presents an optimization model for rotor design of 750 kW horizontal axis wind turbine. The wind turbine blade is a very important part of the rotor. In this work a blade of length ...

6

Show all 10000 documents...

Related subjects