• No results found

Ultrasonic test for new zinc anode (Yamaha 40 hp)

Suggested Standard Test Method for Laboratory Evaluation of Zinc Sacrificial Anode Test Specimens

Suggested Standard Test Method for Laboratory Evaluation of Zinc Sacrificial Anode Test Specimens

... standard test method for laboratory evaluation of Magnesium Sacrificial Anode test specimens is available as ASTM International Standard: G97-97(Re-approved ...of Zinc Sacrificial Anode ...

6

The Performance of Zinc Sacrificial Anode in Simulating Marine Fouling Environment

The Performance of Zinc Sacrificial Anode in Simulating Marine Fouling Environment

... efficiency test The self-discharge measurement was carried out on the basis of GB/T ...The anode specimens were suspended vertically in filtered seawater for a period of 240 ...to anode was ...

10

Development Zinc Oxide–Cotton Fibers as Anode Materials for Lithium-Ion Batteries

Development Zinc Oxide–Cotton Fibers as Anode Materials for Lithium-Ion Batteries

... synthesized zinc oxide nanoparticles on the surface of cotton fiber under ultrasonic irradiation was reported in this ...an anode material for lithium-ion ...

8

Optical and Ultrasonic Properties of Chromium Oxide in Sodium Zinc Phosphate Glass

Optical and Ultrasonic Properties of Chromium Oxide in Sodium Zinc Phosphate Glass

... The relationship between the structure of the host glass and the properties of the doped ions is useful for designing the glasses for different applications. Phosphate glasses containing transition metal oxides (TMO) are ...

8

Ultrasonic studies of molecular interactions of certain Zinc electrolytes in Poly (Ethylene Glycol)

Ultrasonic studies of molecular interactions of certain Zinc electrolytes in Poly (Ethylene Glycol)

... bottle. Ultrasonic velocity was measured with a single crystal interferometer(F81, Mittal Enterprises, New Delhi) at 2 MHz The interferometer was calibrated against the ultrasonic velocity of water ...

6

NDT, Ultrasonic Pulse Velocity Test Assessment, Procedure and Limitation

NDT, Ultrasonic Pulse Velocity Test Assessment, Procedure and Limitation

... of new concrete structures is dependent on many factors such as type of cement, type of aggregates, water cement ratio, curing, environmental conditions ...in new structures, is there to asses the actual ...

9

Design and experimental evaluation of a test rig for
ultrasonic monitoring of sccelerated corrosion

Design and experimental evaluation of a test rig for ultrasonic monitoring of sccelerated corrosion

... a test rig for ultrasonic monitoring of corroding steel samples and results of its experimental evaluation are ...an anode in a typical constant current electroplating ...accuracy ultrasonic ...

7

Startup Thailand: A New Innovative Sacrificial Anode for Reinforced Concrete Structures

Startup Thailand: A New Innovative Sacrificial Anode for Reinforced Concrete Structures

... sacrificial anode in concrete is the activating ...a new sacrificial anode was then accomplished in new activating mortar ...the new sacrificial anodes installed in the concrete prisms, ...

27

A new ultrasonic process for a renewal of aortic valve decalcification

A new ultrasonic process for a renewal of aortic valve decalcification

... ultimate test is the longevity of the improved flexibility and function in the patient, so we plan a clinical trial in patients to verify these two ...this new approach is a coronary bypass grafting ...

5

Synthesis and Toxicity Test Of Zinc (II) Pyridine-2,6-Dicarboxylate Complexes

Synthesis and Toxicity Test Of Zinc (II) Pyridine-2,6-Dicarboxylate Complexes

... for new anticancer-research, generally derived from ...Lethality Test methods have been shown to have a correlation with the power of cytotoksis anticancer ...Toxicity test results expressed in ...

5

Morphology study of electrodeposited zinc from zinc sulfate solutions as anode for zinc-air and zinc-carbon batteries

Morphology study of electrodeposited zinc from zinc sulfate solutions as anode for zinc-air and zinc-carbon batteries

... battery; Zinc-carbon battery Abstract The morphology of Zinc (Zn) deposits was investigated as anode for aqueous ...from zinc sulfate solution in direct current conditions on a copper surface ...

6

Electronic and Ionic Conductivities Enhancement of Zinc Anode for Flexible Printed Zinc Air Battery

Electronic and Ionic Conductivities Enhancement of Zinc Anode for Flexible Printed Zinc Air Battery

... Abstract. Zinc-air batteries are considered promising energy storage devices for future energy applications due to their high energy density, safety, and low ...of zinc utilization, resulted from ...

11

Effects of Zinc Addition on the Performance of Aluminium as Sacrificial Anode in Seawater

Effects of Zinc Addition on the Performance of Aluminium as Sacrificial Anode in Seawater

... sacrificial anode has gained general acceptance as a means of preventing and protecting metals from ...sacrificial anode is used to protect engineering structures from corrosion, such as pipelines, ...

14

Electrowinning of Zinc for the Anode of Rechargeable Hybrid Aqueous Batteries (ReHABs)

Electrowinning of Zinc for the Anode of Rechargeable Hybrid Aqueous Batteries (ReHABs)

... and zinc in sulfuric ...a zinc electrode[3], was able to deliver sustained currents during continuous operation far more efficiently than Volta’s ...amalgamated zinc immersed in dilute sulfuric acid, ...

108

Space Test of Bare-Wire Anode Tethers

Space Test of Bare-Wire Anode Tethers

... The electrons will be expelled into space by a hollow cathode device, thereby completing the circuit and allowing current to flow.This paper will describe the objectives of the proposed [r] ...

6

Effects of Tin on Aluminum–Zinc–Magnesium Alloy as Sacrificial Anode in Seawater

Effects of Tin on Aluminum–Zinc–Magnesium Alloy as Sacrificial Anode in Seawater

... Hollingsworth and Hunsicker (1987), which confirms that corrosion of aluminum alloys in the passive is localized, and showing manifestation of random formation of pits. From physical metallurgy and phase diagrams of ...

9

ASTM D4752 MEK Test (Zinc Test)

ASTM D4752 MEK Test (Zinc Test)

... Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub 1 This standard is issued under the fixed designation D 4752; the number immediately ...

8

Synthesis of Novel Zinc Anode via Electroplating for Rechargeable Hybrid Aqueous Batteries

Synthesis of Novel Zinc Anode via Electroplating for Rechargeable Hybrid Aqueous Batteries

... was obtained at the 300 th battery cycle. The highest capacity retention was found when the brass foil was treated with nitric acid. The capacity was well maintained when the brass foil was treated with nitric acid. This ...

72

Optimization of Manganese and Magnesium Contents in As-cast Aluminum Zinc Indium Alloy as Sacrificial Anode

Optimization of Manganese and Magnesium Contents in As-cast Aluminum Zinc Indium Alloy as Sacrificial Anode

... in anode are more ...course, anode even without Mn will be able to protect structures; how- ever, anode potential changes are acute and critical conditions can be ...

8

Finite Element Analysis and Test of an Ultrasonic Compound Horn

Finite Element Analysis and Test of an Ultrasonic Compound Horn

... An ultrasonic compound horn is designed and manufactured, and the horn is analyzed by wave equation, finite element method and ...The test results are in good agree- ment with the theoretical ...in ...

7

Show all 10000 documents...

Related subjects