VO/sub 2/ thin films
Structural Properties of (SnO<sub>2</sub>)<sub>1-x</sub>(ZnO)<sub>x</sub>Thin Films Deposited By Spray Pyrolysis Technique
... films were prepared by spray pyrolysis technique at a substrate temperature of 400°C. The films deposited were 190 nm thickness. The XRD analysis for its structural characteristic has been performed. The ...
8
Volume 8 | Issue 4 - 2018
... The thin films were annealed at (573 K) for (2 ...the thin films was measured using optical thin film measurement (LIMF- ...of thin films with silicon substrate ...
7
Integration of VO2 Films on Al2O3 and Si (100) Substrates: Structure-Property Correlations and Applications.
... subject of intense investigation recently, because of their importance in emerging frontier of spintronics. The unpaired 3d electronic spins associated with the host atoms or the magnetic impurities, impurity-defect ...
158
Novel nanostructured biomaterials: implications for coronary stent thrombosis
... y thin films with a thickness of 100 nm were fabricated employing the magnetron sputtering technique in an unbal- anced ...of films was grown under the same negative substrate bias voltage (Vb = − 40 ...
14
Preparation of VO<sub>2</sub> Nanoparticles with Surface Functionalization for Thermochromic Application
... Surface modification of metal oxide nanoparticles is clearly one of effective way to reduce its surface energy and to improve its distribution in solvent and also in polymer matrix. Especially the grafting of functional ...
11
<p>Atomic Layer Deposition Coating of TiO<sub>2</sub> Nano-Thin Films on Magnesium-Zinc Alloys to Enhance Cytocompatibility for Bioresorbable Vascular Stents</p>
... rate of bare Mg-Zn alloys so that the biomaterial will not lose its functionality before the completion of the revascu- larization period (5 – 6 months). An ALD coating at 200°C did not show such positive outcomes with ...
16
Effect of Different Current Density on Structural and Mechanical Properties of Fe-Ni-Co Alloy Thin Films
... 440 | P a g e with NiFe alloy. Electrodeposited Permalloy [NiFe] is the best known thin film alloy in MEMS applications (13, 19). In this current investigation, the electrodeposition method is chosen for coating ...
7
Synthesis of Antimony Telluride Thin Films by Thermal Annealing
... the films becomes more crystalline with the increase in the annealing ...the thin film contains flakes type structure which when annealed to a higher temperature 150°C (b) and 200°C (c) becomes more ...
7
Substrate Temperature Effect on Optical property of ZnO Thin Films
... ZnO thin films can be produced by several techniques such as reactive evaporation and thermal annealing [6], molecular beam epitaxy (MBE) [7], magnetron sputtered technique[8], pulsed laser deposition (PLD) ...
8
Impact of nanostructured thin ZnO film in ultraviolet protection
... study, thin ZnO films were prepared using a sol-gel method on glass substrates, and the structural and optical properties of these films were studied using X-ray diffraction (XRD), atomic force ...
10
Fabricating and Characterizing Chalcogenide Thin Films as Light Absorbing Layers in Solar Cells
... CZTS films were quantitatively ...CZTS films were divided into groups of high-photoresponse (hp-CZTS) and low-photoresponse samples ...CZTS films crucial for the development of solar energy ...
188
InxSn1-xO2 Thin Films Synthesized via Spray Pyrolysis Method and Characterized for Glucose Detection by Means of Impedimetric Sensors
... transparent thin films were deposited onto glass substrates by chemical thermal spray pyrolysis using aqueous solution of tin chloride ...sprayed films are polycrystalline with the (110) plane as ...
6
1. Structural and electrical properties of sns thin films via chemical bath deposition technique
... Nano thin films were grown on microscope glass substrate using solution growth technique from solutions of triethanolamine (TEA), ammonia (NH 3 ) and ...
10
Structural and Optical Properties of Hydrothermally Grown Zns Thin Films
... ZnS thin film has been proven as one of the promising thin film materials for detector, emitter, and modulators in optoelectronics It is potentially important material to be used as an antireflection ...
5
Volume 9 | Issue 3 - 2019
... AFM results displayed homogenous and smooth NiO:Al films. The average grain size, average roughness, and root mean square (RMS) roughness for NiO:Al films, founded from AFM, which is given in Table 1. ...
6
Fabrication and characterization of antibacterial surfaces derived from geranium essential oil using PECVD
... biopolymer films with consistent properties regardless of base material source, method or time of harvest is important for successful integration into the industrialised ...
165
Effect of Surface Passivation on Doped Tin (IV) Oxide Thin Films for Gas Sensing Applications
... through doping has been reported as well. Most gas sensors are usually exposed to harsh environment where they act as selective surface gas sensor for a particular gas or fume chemical, and in most cases continuous or ...
108
Semiconductor-to-metal Transition Control in Novel VO2/Silicon and VO2/Sapphire Epitaxial Thin Film Heterostructures for Device Applications.
... of 2-3 J/cm 2 and repetition rate of 5 ...these films was performed at Inter University Accelerator Centre New Delhi, India in Materials Science beam ...the thin film heterostructure was ...
191
Effect of Sputtering Technique and Properties of TiO 2 Doped with SnO 2 Thin Films
... the films were recorded by PANanlytical, X’pert PRO powder diffractometer, using Cu Kα radiation ( = ...the films was observed by scanning electron microscopy (SEM) using a digital scanning microscope ...
7
Hydrophobic silica thin films by sol-gel processing and spin coating technique at low temperature
... silica thin film and hydrophobic silica thin film are shown in Table ...the films caused by spontaneous and reversible surface modification where it build up more units of Si-CH 3 ...
5