• No results found

wheel set

Research on Intelligent Data Collecting Controller for Incipient Fault on Wheel set of High speed Train Based on Wireless Technology

Research on Intelligent Data Collecting Controller for Incipient Fault on Wheel set of High speed Train Based on Wireless Technology

... The 4G wireless network is an essential component of the controller[9~10]. In particular, the 4G wireless network is used to transmit data between train and information monitoring station. When the high-speed train is ...

6

MATEMATICAL MODEL OF DYNAMIC INTERACTION BETWEEN WHEEL-SET AND RAIL TRACK

MATEMATICAL MODEL OF DYNAMIC INTERACTION BETWEEN WHEEL-SET AND RAIL TRACK

... Rails and sleepers were modelled using of Euler-Bernoulli beam elements. The response due to a moving mass with a non-linear Hertzian contact spring traversing a corrugated track was calculated using of time integration ...

6

A transient dynamic study of the self-excited vibration of a railway wheel set-track system induced by saturated creep forces

A transient dynamic study of the self-excited vibration of a railway wheel set-track system induced by saturated creep forces

... outer wheel of the wheelset and high rail is at the flange root of the wheel, and the contact point between the inner wheel and low rail is at the center of the wheel tread ...

30

THE DEVELOPMENT OF TECHNOLOGICAL METHODS OF LASER SURFACE TREATMENT OF HEAVILY LOADED PARTS WHEEL SET CARS

THE DEVELOPMENT OF TECHNOLOGICAL METHODS OF LASER SURFACE TREATMENT OF HEAVILY LOADED PARTS WHEEL SET CARS

... Проведення експериментів на циліндричних зразках показало, що в діапазоні потужності лазерного випромінювання від 1 до 3 кВт оптимальний діаметр плями випромінювання на поверхні, що напл[r] ...

5

The 3-D Finite-element analysis of press Fitting process in railway wheel-set

The 3-D Finite-element analysis of press Fitting process in railway wheel-set

... Abstract. Variations in the loading of rolling contact components lead to a change in contact forces between surfaces. These forces represent the main cause of rolling contact damages such as fatigue. Residual stresses ...

8

A Study On Independent Wheel Railway Bogie

A Study On Independent Wheel Railway Bogie

... Railway vehicle is common vehicle that had been used wisely in many countries since the heavy industries began. Generally, railway vehicle consists of carriage, bogie frame, wheel set, and suspension system ...

24

A Recursive Wheel Wear and Vehicle Dynamic Performance Evolution Computational Model for Rail Vehicles with Tread Brakes

A Recursive Wheel Wear and Vehicle Dynamic Performance Evolution Computational Model for Rail Vehicles with Tread Brakes

... worn wheel after 20,088 km distance covered by the ...the wheel wears out further, the duration of its appearance ...worn wheel profile after 100,440 km, the secondary contact patch appears for a ...

28

Aerodynamics of High Performance Bicycle Wheels

Aerodynamics of High Performance Bicycle Wheels

... spoked wheel which can be modified to alter the aerodynamic performance of the ...spoked wheel having 36 spokes and the WH- R561 model by Shimano having just 16 spokes (Shimano, ...affordable wheel ...

130

A Mechatronic Approach for the Detection of Wheel Slip/Slide and Antislip Control of Locomotive with AC Traction Motors

A Mechatronic Approach for the Detection of Wheel Slip/Slide and Antislip Control of Locomotive with AC Traction Motors

... for wheel set traction motor that are significantly more reliable and unsophisticated if compared to the previous DC motors used for ...drive wheel sets it is necessary to apply different principles ...

6

How wireless wheel monitors could identify railway track faults

How wireless wheel monitors could identify railway track faults

... “You could ask if it’s better for the wheel set to wear quicker and the rail head to not wear, thereby transferring more of the wear rate to the operator, or ask if the most cost effecti[r] ...

5

An Experimental Study of Advanced Universal Impeller System with Limited RPM using  Pedal Mechanism

An Experimental Study of Advanced Universal Impeller System with Limited RPM using Pedal Mechanism

... rear wheel bicycle and runs by rotating the pedal of a cycle at a particular ...The wheel rotates the impellers by sliding action between wheel and friction roller of the ...

7

A study on calculation of optimum gear 
		ratios for three stage bevel helical gearboxes

A study on calculation of optimum gear ratios for three stage bevel helical gearboxes

... the wheel face width coefficients of the bevel gear set k be have a small negative effect on u 2 and it has no effect on u 1 ...the wheel face width coefficient of the third helical gear set  ...

7

GENERAL WARNING: Like any sport, bicycling involves risk of injury and damage. By

GENERAL WARNING: Like any sport, bicycling involves risk of injury and damage. By

... Riding with an improperly adjusted wheel quick release can cause6. the wheel to wobble or disengage fr.[r] ...

20

Study of model predictive control for path-following autonomous ground vehicle control under crosswind effect

Study of model predictive control for path-following autonomous ground vehicle control under crosswind effect

... Copyright © 2016 Fitri Yakub et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the ...

19

A Study of Two Wheel Drive Motorcycle Patil Sahil 1, Gorde Aniket1 , Yadav Omkar 1, Pardeshi Nikhil1 , Shaikh Tauseef 2

A Study of Two Wheel Drive Motorcycle Patil Sahil 1, Gorde Aniket1 , Yadav Omkar 1, Pardeshi Nikhil1 , Shaikh Tauseef 2

... rear wheel drive motorcycle which we initially started with was successfully converted into a two wheel drive motorcycle with automatic engagement within the given span of ...front wheel was made ...

5

Answer Set Programming - Free Computer, Programming, Mathematics, Technical Books, Lecture Notes and Tutorials

Answer Set Programming - Free Computer, Programming, Mathematics, Technical Books, Lecture Notes and Tutorials

... answer set solvers is based on computational methods somewhat similar to those employed by satisfiability solvers—systems that find a truth assignment satisfying a given set of propositional ...answer ...

198

Automated Wheel Assembly System Using PLC

Automated Wheel Assembly System Using PLC

... for wheel loading. Therefore, t he cost for wheel loading is about ...the wheel loading process is getting higher and higher, especially when the automotive manufacturing is facing difficult ...the ...

8

Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects

Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects

... cushion system and the in-wheel motor system. Based on the model, using a special form of infinite integral, a mathematical expression of the occupant RMS acceleration is derived. Using the RMS optimization ...

8

V

V

... z Since computer visual technology is used in recognizing the targets mounted on the wheels through the camera with high resolution, it is necessary to keep X-712S wheel aligner away from the outside infrared rays ...

24

BELLSYST M PRACTICES SECTION 501-250-303 A&TCo Standard Iss ue 4, September 1978

BELLSYST M PRACTICES SECTION 501-250-303 A&TCo Standard Iss ue 4, September 1978

... Ringer shall produce a steady ring on at least one gong when volume control wheel is in low notch and on both gongs as wheel is advanced to high notch. With volume control wheel in high [r] ...

6

Show all 10000 documents...

Related subjects