18 results with keyword: 'effect of deformation on the mechanical and electrical properties of aluminum magnesium alloy'
Aluminum 6063 alloy processed by upset forging and cold rolling at ambient temperature has shown that the UTS and hardness increase as the range of thickness reduction
N/A
variable. The effect of externally applied pressure on electrical impedance values was investigated using the silicon prototype to measure beef rib fat and muscle
N/A
In this research the effect of various heat treatments on tensile properties and hardness of Aluminum-Zinc-Magnesium-Copper alloy (7075 Aluminum alloy) was
N/A
The physical properties, such as density and conductivity, of an alloy may not differ greatly from those of its component elements, but engineering properties
N/A
The Effect of Extrusion Ratio and Material Flow on the Mechanical Properties of Aluminum Profiles Solid State Recycled from 6060 Aluminum Alloy Chips. The 14th International
N/A
Ahmed, Jamaluddin, "The effect of plastic deformation on magnetic and electrical properties of iron- copper alloy." (1970).. Electronic Theses
N/A
The highest increase of micro hardness was achieved in route i. The measurements were made on the lateral surface because of the limited amount of research material. This method
N/A
14.40 HTDC_074 The effect of hold time and bifilm index on mechanical properties of high magnesium content aluminum %5 magnesium alloys with boron/Sr/Ti/Zr/Bi additionE. Kayali
N/A
View the table of contents for this issue, or go to the journal homepage for more 2015 IOP Conf.. The effect of hydrogen embrittlement on the mechanical properties of
N/A
For this, the phase composition and properties of severely plastically deformed metal-ceramic composites based on the magnesium alloy WE43 modified with aluminum, titanium,
N/A
The precipitation of phases in the alloy resulting from heat treatment was predicted using the JMatPro 6.0 software application and the predicted results were veri fi ed
N/A
"Effect of welding heat input on the intermetallic compound layer and mechanical properties in arc welding-brazing dissimilar joining of aluminum alloy to galvanized
N/A
2, 12–14 that such excellent mechanical properties can be attained in various ultra-fine grained materials processed by severe plastic deformation (SPD). Recently, Tsuji et al.
N/A
This study has been conducted to investigate the effect of welding process parameter on the mechanical properties and microstructure of aluminum alloy 5083, using Pulsed Tungsten
N/A
Prangnell, The effect of cryogenic temperature and change in deformation mode on the limiting grain size in a severely-deformed dilute aluminum alloy, Acta Mater. Lu,
N/A
Increasing further the Z parameter formed recrystallization, having coarse recrystallized structures (discontinuous recrystallization structure) of hundreds of micrometers in
N/A
The Effect of Deformation Ratio and Heat Treatment Time on the Microstructure and Mechanical Properties of A356 Aluminium Alloy During SIMA Process.. International Journal of
N/A
Kumar, Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of AA7039 aluminum alloy, Mater. Mahoney, Microstructural investigation
N/A