18 results with keyword: 'effect treatment mechanical properties microstructure selective melting stainless'
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism. Microstructure and
N/A
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism.. Selective laser melting
N/A
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism. Microstructure and
N/A
The Effect of Build Orientation on the Surface Quality, Microstructure and Mechanical Properties of Selective Laser Melting 316L Stainless Steel.. Hamza Alsalla* † Liang Hao
N/A
variable. The effect of externally applied pressure on electrical impedance values was investigated using the silicon prototype to measure beef rib fat and muscle
N/A
Heat treatment of Ti6Al4V produced by selective laser melting: Microstructure and mechanical properties. and
N/A
4th International Conference on Mechanical Engineering Research (ICMER2017) IOP Publishing IOP Conf. While heat treatment reduced the volume fraction of δ-ferrite and become
N/A
The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys. Selective Laser Melting of aluminium alloy
N/A
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting. Microstructure and
N/A
Abstract: The microstructure and mechanical properties of Al-20Si produced by selective laser melting (SLM) are investigated for different heat treatment conditions.. As a result of
N/A
This phenomenon is shown outwardly by the appearance of blisters on the surface of the test pieces (Fig. Figure 7 clearly shows a difference in the quantity and size of
N/A
Cobalt-chromium alloy; Additive manufacturing; Selective laser melting; Microstructure; Tensile properties; Heat-treatment... Page 3 of 27
N/A
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties. Analysis of processing parameters and characteristics of selective
N/A
If a child has been abused over a period of time, and presents him/herself within 72 hours of the last incident of abuse, the child would require a medical examination and an HIV
N/A
We report the procedural safety and clinical outcomes in a prospective randomized controlled trial of endovascular coiling for ruptured and unruptured intracranial aneurysms,
N/A
At present, research on SLM forming 17-4PH steel mainly includes molding process, microstructure, microhardness and tensile strength, while the research on
N/A
Frascati, Application study of AlSi10Mg alloy by selective laser melting: physical and mechanical properties, microstructure, heat treatments and manufacturing of aluminium
N/A