• No results found

[PDF] Top 20 Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation

Has 10000 "Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation" found on our website. Below are the top 20 most common "Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation".

Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation

Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation

... ABSTRACT Construction materials are materials that were used in construction field such as cements, sands, gravels, bricks and ...those materials have their own characteristics which ... See full document

24

Effect of Variation in Outlet Air Grilles location on Thermal Comfort and Air Flow Patterns

Effect of Variation in Outlet Air Grilles location on Thermal Comfort and Air Flow Patterns

... begging simulation Problem setup and included Model as shown in ...Fig(6). Materials setup which included material properties used in simulation such as density (ρ), specific Heat (Cp)and ... See full document

9

Thermal behaviour of ski-boot liners: effect of materials on thermal
comfort in real and simulated skiing conditions

Thermal behaviour of ski-boot liners: effect of materials on thermal comfort in real and simulated skiing conditions

... Different materials used for the construction of ski-boot liners have been tested in order to determine their insulating behaviour and their moisture ...obtained using the thermo-camera and the ... See full document

7

Features of Materials versus Thermal Comfort in a Passive Building

Features of Materials versus Thermal Comfort in a Passive Building

... optimal materials and construction solutions is essential and can guarantee maintaining comfortable conditions inside the building in all seasons, even when outside temperatures reach high ...the ... See full document

8

Thermal comfort in non-uniform environments: real-time coupled CFD and human thermal regulation modelling

Thermal comfort in non-uniform environments: real-time coupled CFD and human thermal regulation modelling

... a simulation, both air temperature for each node and the surfaces’ temperature are calculated, and then the operative temperature is calculated as the arithmetic mean of the other two ...their effect is ... See full document

224

Effect of Dynamic Vents on the Thermal Comfort of a Passenger Car

Effect of Dynamic Vents on the Thermal Comfort of a Passenger Car

... the thermal comfort inside the passenger ...delivering comfort to an occupant in the ...and CFD analysis of an energy efficient HVAC system with spot cooling by strategically placing multiple ... See full document

10

CFD simulation on the thermal comfort in a library building in the tropics

CFD simulation on the thermal comfort in a library building in the tropics

... Abstract. This paper presents a three-dimensional analysis for thermal comfort in a library. The room model includes library layout, equipment and peripheral positions as well as the pos[r] ... See full document

11

CFD validation of the thermal comfort in a room using draft rates

CFD validation of the thermal comfort in a room using draft rates

... energy equation were used to calculate the 3-dimentional flow field and heat transfer. The finite control-volume method was implemented for the spatial discretisation of the domain. The geometry and boundary conditions ... See full document

9

Thermal comfort in the historical urban canyon: the effect of innovative materials

Thermal comfort in the historical urban canyon: the effect of innovative materials

... on thermal comfort conditions in urban ...outdoor comfort in the canyon is mainly affected by exposure to solar radiation and, therefore, street orientation and height/width ratio (H/W) have a ... See full document

10

CFD Study of Thermal Comfort in Urban Area

CFD Study of Thermal Comfort in Urban Area

... 3 Department of Agriculture Crop Production and Rural Environment, School of Agricultural Sciences, University of Thessaly, Greece Copyright©2017 by authors, all rights reserved. Authors agree that this article remains ... See full document

11

Evaluation of thermal comfort in naturally ventilated school classrooms using CFD

Evaluation of thermal comfort in naturally ventilated school classrooms using CFD

... The CFD predictions suggest that by controlling the opening of windows it is feasible to maintain acceptable indoor conditions in single-sided naturally ventilated ...draughts. Using weather data for the ... See full document

9

Thermal Simulation of Cold Plate using CFD Analysis

Thermal Simulation of Cold Plate using CFD Analysis

... systems is causing the need to improve volumetric requirements, ruggedness, weight, reliability, noise levels, and thermal heat dissipation. Modern integrated power electronics have a much higher power density ... See full document

8

The effect of using aluminium sheet for thermal comfort

The effect of using aluminium sheet for thermal comfort

... 10 2.2.2 Potential benefits of cooling energy consumption One of the objective this research in to reduce energy consumption of using air conditioning in Malaysia by provide an alternative system to replace ... See full document

24

Thermal comfort of colonial office building, 
		Semarang using EnergyPlus 
		simulation

Thermal comfort of colonial office building, Semarang using EnergyPlus simulation

... toward thermal comfort parameters such as indoor air temperature and percentage difference of relative ...computer simulation using Energy Plus ... See full document

8

Seasonal  and  Diurnal  Variation  in  Thermal  Comfort  in  Sri  Lanka

Seasonal and Diurnal Variation in Thermal Comfort in Sri Lanka

... The seasonal variation in temperature recorded during the present study at Perade- niya was fairly typical of that shown by meteorological records for Kandy. The same patte[r] ... See full document

13

AN INVESTIGATION OF THERMAL COMFORT BY AUTODESK CFD SIMULATION AT INDOOR LIVING SPACE IN URBAN RESIDENTIAL BUILDING IN MONSOON CLIMATE

AN INVESTIGATION OF THERMAL COMFORT BY AUTODESK CFD SIMULATION AT INDOOR LIVING SPACE IN URBAN RESIDENTIAL BUILDING IN MONSOON CLIMATE

... existing thermal condition inside the building which is based on the case ...The thermal condition of the building has been observed by Autodesk CFD software simulation ...the ... See full document

6

Cfd Simulations of Thermal Comfort in Naturally Ventilated Primary School Classrooms

Cfd Simulations of Thermal Comfort in Naturally Ventilated Primary School Classrooms

... Conclusions From experimental analysis based on SRPS EN ISO 7730 average value of PMV is –0.57 which is slightly cold based on a Fanger’s scale, and average value of PPD is 12.24%. The mathematical model has been ... See full document

10

CFD TRANSIENT THERMAL ANALYSIS OF CYLINDER FINS WITH TRIANGULAR HOLES BY USING DIFFERENT MATERIALS

CFD TRANSIENT THERMAL ANALYSIS OF CYLINDER FINS WITH TRIANGULAR HOLES BY USING DIFFERENT MATERIALS

... investigated effect of number of fin, fin pitch and wind velocity on air- cooling using experimental cylinders for an air- cooled engine of a motor-cycle in wind ... See full document

6

Inlet and outlet configurations effect on thermal comfort

Inlet and outlet configurations effect on thermal comfort

... ABSTRACT Air inlet and outlet configurations is done by opening or closing the oulet ventilation that near the ceiling or floor and providing 100% fresh air for ventilation. Air inlet and outler give significant effecet ... See full document

24

A user-controlled thermal chair for an open plan workplace : CFD and field studies of thermal comfort performance

A user-controlled thermal chair for an open plan workplace : CFD and field studies of thermal comfort performance

... of thermal comfort were applied to in open plan office in November in Leeds, ...after using the thermal chair. Their views of the thermal chair was recorded before and after the use of ... See full document

24

Show all 10000 documents...