• No results found

18 results with keyword: 'effects polypropylene fibre compressive splitting tensile strength concrete'

Effects of polypropylene fibre on the compressive and splitting tensile strength of concrete

Mohod [6]; concluded that the optimum value of fibre content of 0.5% was found satisfactory for compressive and splitting tensile strength of concrete grades 20 and 30

Protected

N/A

8
0
0
2021
Impacto del refuerzo de fibra de polietileno de alto rendimiento torsionada en las características mecánicas del hormigón de alta resistencia

unprocessed UHMPWE fibre, polypropylene fibre and basalt fibre, it indicated that the twisting UHMWPE fibre bundle improved the splitting tensile strength and compressive strength

Protected

N/A

16
0
0
2021
Performance Evaluation Of Textile Fabric Fibre-Reinforced Concrete

Index Terms: Textile fabric fibre, concrete, compressive strength, flexural strength, splitting tensile strength, acid resistance, weight

Protected

N/A

5
0
0
2020
Experimental Investigation on Fibre Reinforcement Concrete by using Macro Plastic Fibre

Key Words: Fiber reinforced concrete, Beam, Macro plastic fiber, polypropylene fibre, compressive strength, flexural strength, split tensile strength,

Protected

N/A

5
0
0
2020
Polypropylene Concrete

Various strengths considered for investigation are compressive strength, split tensile, bond strength and shear strength for Polypropylene fibre reinforced concrete..

Protected

N/A

9
0
0
2020
Experimental investigation of pervious concrete with addition of fibre

The comparison of percentage difference in splitting tensile strength for polypropylene fibre reinforced pervious concrete to its control batch is presented below,

Protected

N/A

5
0
0
2020
Behaviour of Hybrid Fibre Reinforced Concrete with Partial Replacement of Cement by Fly Ash in Flexure

 The compressive and split tensile strength of the hybrid fibre reinforced concrete cast with 1% hybrid Fibres(0.50% of polypropylene fibre and 0.50% of Glass

Protected

N/A

7
0
0
2020
Strengthening of Two-Way RC Slab using Polypropylene Fabric

This study consisted of compressive strength test and split tensile strength test on hybrid fibre reinforced concrete with 0.5% polypropylene fibres and 0.75% steel fibres.. The

Protected

N/A

8
0
0
2020
Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures

Key words: concrete; compressive strength; splitting tensile strength; high temperature;

Protected

N/A

42
0
0
2021
Study on Utilization of Waste Plastic as Fibres in Fibre Reinforced Concrete

Key Words: Fibre Reinforced Concrete, Waste Plastic Fibre Reinforced Concrete, Waste Plastic Fibres, Compressive Strength, Split Tensile Strength,

Protected

N/A

5
0
0
2020
A Study on the Effect of Fly Ash on Hybrid Fibre Reinforced Concrete A Paul Makesh1, Vellingiri Anusuya 2

The mechanical properties are given in terms of compressive, splitting tensile strength and flexural tests of hybrid fibre reinforced concrete with different

Protected

N/A

9
0
0
2020
An Experimental Study to Compare the Strength Characteristics of Concrete using Polypropylene Fiber and Polyester Fiber Admixtures

KEYWORDS : Polymer reinforced concrete, polypropylene fiber, polyester fiber, Compressive strength, Flexural Strength, Split tensile strength..

Protected

N/A

8
0
0
2020
Influence of Steel and Bamboo Fibres on Mechanical Properties of High Strength Concrete

The results of splitting tensile test show that concrete containing 1.0% bamboo fibre produced the highest splitting tensile strength of 8.10 MPa for bamboo

Protected

N/A

9
0
0
2021
Performance Study and Determining the Strength of Concrete by Addition of Class-E Glass Fiber

It is observed from the experimental results and its analysis, that the compressive strength of concrete, splitting tensile strength of concrete and flexural strength of

Protected

N/A

8
0
0
2020
Effect of Steel Fiber and Polypropylene Fiber on Reinforced Concrete

The experimental program consisted of testing the compressive strength and split tensile strength on steel fiber- reinforced concrete and polypropylene fiber-reinforced concrete..

Protected

N/A

7
0
0
2021
Mechanical Properties of Concrete Made with Electric Wires, Steel Fibers, Basalt
Fibers and Polypropylene Fibers

Fifty two concrete cylinders are tested under compression and splitting tensile strength tests to investigate the compressive and tensile strength of concrete made with

Protected

N/A

8
0
0
2021
Experimental Investigation on Strength Improvement of Rubcrete

The compressive strength, splitting tensile strength and axial compressive strength of crumb rubber concrete prepared with pretreated rubber using synthetic resin increased 12%,

Protected

N/A

5
0
0
2020
Study On Properties Of High Strength Silica Fume Concrete Withpolypropylene Fibre

The mechanical properties viz., compressive strength, flexural strength and split tensile strength, of high strength concrete with various replacement of polypropylene fiber 0.5%,

Protected

N/A

6
0
0
2020

Upload more documents and download any material studies right away!