• No results found

[PDF] Top 20 Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1/3Mn1/3O2 for Li-ion Batteries

Has 10000 "Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1/3Mn1/3O2 for Li-ion Batteries" found on our website. Below are the top 20 most common "Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1/3Mn1/3O2 for Li-ion Batteries".

Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1/3Mn1/3O2 for Li-ion Batteries

Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1/3Mn1/3O2 for Li-ion Batteries

... the electrochemical impedance software is different from the previous research [14-15], it can match the measurement results ...the impedance spectra and their equivalent circuit are the same as that ... See full document

9

Li2SiO3 Coating to Improve the High-voltage Performance of LiNi1/3Co1/3Mn1/3O2 Cathode

Li2SiO3 Coating to Improve the High-voltage Performance of LiNi1/3Co1/3Mn1/3O2 Cathode

... and electrochemical impedance spectroscopy (EIS) of the B-NCM and C-NCM cells were carried out using an electrochemical workstation (VMP3, ...vs. Li + /Li at a scan rate ... See full document

12

The Improvement for the Electrochemical Performances of LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Lithium-ion Batteries by both the Al-doping and an Advanced Synthetic Method

The Improvement for the Electrochemical Performances of LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Lithium-ion Batteries by both the Al-doping and an Advanced Synthetic Method

... (vs. Li + / Li) on a Land battery tester (Wuhan, ...and electrochemical impedance spectroscopy (EIS) of coin cells were conducted by an electrochemical work station (IM6, ... See full document

11

Enhanced Performance of LiNi1/3Co1/3Mn1/3O2 Cathodes at Elevated Temperatures Using an Imidazolium-Based Electrolyte with Lithium Difluoro(oxalate)Borate

Enhanced Performance of LiNi1/3Co1/3Mn1/3O2 Cathodes at Elevated Temperatures Using an Imidazolium-Based Electrolyte with Lithium Difluoro(oxalate)Borate

... AC impedance spectroscopy on an electrochemical workstation (1470E Cell Test System, Solartron) using a two Pt- electrode ...cell. Electrochemical measurements, including ... See full document

15

High Voltage and High Capacity Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium Battery Applications

High Voltage and High Capacity Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium Battery Applications

... charge [SOC] values such as 0%, 25%, 50%, 75% and 100% are shown in Fig.4b. A semi circle in the high frequency region and a spike in the low frequency region were characterized by the individually recorded ... See full document

11

Hydrothermally-assisted co-precipitation and Electrochemical Performance of LiNi1/3Co1/3Mn1/3O2 Cathode Material

Hydrothermally-assisted co-precipitation and Electrochemical Performance of LiNi1/3Co1/3Mn1/3O2 Cathode Material

... are 155 mAh·g -1 (A), 164 mAh·g -1 (B), 194 mAh·g -1 (C), 178 mAh·g -1 (D) and 215 mAh·g -1 (E), respectively at 0.1 C and reduce to 50 mAh·g -1 (A), 87 mAh·g -1 (B), 126 mAh·g -1 (C), 80 mAh·g -1 (D) and 55 mAh·g -1 ... See full document

15

Microstructural Investigations of the Layered Cathode Materials LiCoO2 and LiNi1/3Mn1/3Co1/3O2

Microstructural Investigations of the Layered Cathode Materials LiCoO2 and LiNi1/3Mn1/3Co1/3O2

... 3 a Hex × 3 a Hex . in plane ordering suggested by Koyama (Fig. 2.3b). Case C corresponds to a model considering Li and Ni interchange (Fig. 2.3h, i). No experimental evidence could be found for pile-up model ... See full document

53

Effects of Sintering Time on the Performance of LiNi1/3Co1/3Mn1/3O2 Synthesized by High Temperature Ball Milling Method

Effects of Sintering Time on the Performance of LiNi1/3Co1/3Mn1/3O2 Synthesized by High Temperature Ball Milling Method

... The prospect of lithium-ion battery applications is very positive because of its high ratio of performance to price. Cathode material is an important part of the battery. The three-element cathode material which ... See full document

8

Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode Powder Prepared by Different Method in Lithium Rechargeable Batteries

Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode Powder Prepared by Different Method in Lithium Rechargeable Batteries

... As shown in Fig. 6, the rate capability tests were carried out to examine the lithium-ion transfer in the solid state. The cell was charged at 0.2 C (1 C = 160 mAh/g) 7 until it was at 4.3 V and then discharged to ... See full document

8

Synthesis and Characterization of LiNi1/3Co1/3Mn1/3O2 as Cathode Materials for Li-Ion Batteries via an Efficacious Sol- Gel Method

Synthesis and Characterization of LiNi1/3Co1/3Mn1/3O2 as Cathode Materials for Li-Ion Batteries via an Efficacious Sol- Gel Method

... of Li + ions and electrons, which will help NCM-850-16 sample achieve excellent electrochemical ...the Li + ions diffusion, and accordingly increases the electrode polarization and worsens the ... See full document

12

Graphene Oxide Modified LiNi1/3Co1/3Mn1/3O2 as Cathode Material for Lithium Ion Batteries and Its Electrochemical Performances

Graphene Oxide Modified LiNi1/3Co1/3Mn1/3O2 as Cathode Material for Lithium Ion Batteries and Its Electrochemical Performances

... identified, thus indicating that the materials have highly ordered layered structures [31]. The XRD pattern of GO shown in Fig.1(b) has a sharp peak at 11°, which can be attributed to the complete oxidation of graphite ... See full document

14

Effect of Ambient Atmosphere and Temperature on The Corrosion Resistance of X80 High-deformation Pipeline Steel in Bicarbonate Solution

Effect of Ambient Atmosphere and Temperature on The Corrosion Resistance of X80 High-deformation Pipeline Steel in Bicarbonate Solution

... Corrosion of pipeline steels, which depends on the internal and external environments of pipelines, is difficult to predict and control [4-7]. Almost 60% of oil pipeline corrosion failures in the USA are attributed to an ... See full document

14

The Corrosion Protection Behaviour of Zinc Rich Epoxy Paint in 3% NaCl Solution

The Corrosion Protection Behaviour of Zinc Rich Epoxy Paint in 3% NaCl Solution

... Nyquist impedance diagrams for the ZRP coated panels obtained in the aerated 3% NaCl solution as a function of immersion time are shown in Figure ...the impedance re- duces to one or two semicircles with ... See full document

10

Inhibitive Effect of Cefuroxime on the Corrosion of Mild Steel in Hydrochloric Acid Solution

Inhibitive Effect of Cefuroxime on the Corrosion of Mild Steel in Hydrochloric Acid Solution

... using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and gravimetric ...polarization study clearly revealed that CFM acted as ... See full document

13

Electrochemical Impedance Spectroscopic Study of Electrocoated Polythiophene and poly(2-methyl thiophene) on Carbon Fiber Microelectrode for Microcapacitor

Electrochemical Impedance Spectroscopic Study of Electrocoated Polythiophene and poly(2-methyl thiophene) on Carbon Fiber Microelectrode for Microcapacitor

... Electrochemical impedance spectroscopy was performed to monitor the electrochemical behavior of the PT and PMT homopolymer electrodes. Bode phase angle, which is very close to 90 0 as observed ... See full document

13

Download
			
			
				Download PDF

Download Download PDF

... The EIS analysis is a powerful and informative technique which determines the rate that the electrode material can be charge/discharge [13], therefore an important factor in determining the power density and to ... See full document

6

Kinetic Investigation of LiCoO2 by Electrochemical Impedance Spectroscopy (EIS)

Kinetic Investigation of LiCoO2 by Electrochemical Impedance Spectroscopy (EIS)

... charge/discharge process, and also increases with the increasing cycles at a given SOC. It also can be found that the difference between the first cycle and the second cycle is more evident than that between the second ... See full document

11

Improving the dielectric properties of ethylene-glycol alkanethiol self-assembled monolayers.

Improving the dielectric properties of ethylene-glycol alkanethiol self-assembled monolayers.

... photoelectron spectroscopy (XPS), ellipsometry and contact angle ...by electrochemical impedance spectroscopy (EIS), where the phase of the impedance is found to increase ... See full document

6

Construction of a Potentiostat to Perform Electrochemical Impedance Spectroscopy (EIS) Tests

Construction of a Potentiostat to Perform Electrochemical Impedance Spectroscopy (EIS) Tests

... an impedance at high fre- quencies, as shown in the Nyquist diagram, Figure 1, and Figure 14 (left), which shows the existence of an additional resistance in the system, due to the distance between the auxiliary ... See full document

13

Electrochemical Behavior of 316L Stainless Steel in f/2 Culture Solutions Containing Chlorella Vulgaris

Electrochemical Behavior of 316L Stainless Steel in f/2 Culture Solutions Containing Chlorella Vulgaris

... Up to now, many studies have been conducted on MIC on 316L SS [4-10]. The most of these researches have demonstrated the role of bacteria in biocorrosion [11]. By contrast, microalgae have attracted little interest. In ... See full document

13

Show all 10000 documents...