18 results with keyword: 'flexural performance hybrid gfrp steel reinforced concrete continuous'
In addition, two continuous concrete beams reinforced with either GFRP or steel bars, one simply supported beam reinforced with GFRP bars and two simply supported beams
N/A
The GFRP-reinforced geopolymer concrete (GFRP-RGC) beams yielded higher flexural strength than both steel-reinforced geopolymer concrete (S-RGC) and GFRP- reinforced concrete
N/A
The Ultimate load carrying capacity of the tested beams are shown in Table 4.The flexural capacity of the hybrid GFRP/steel-reinforced concrete beams increased
N/A
This paper presents a comparison of the experimental results with those predicted by the ACI 440 code in terms of; measured cracking moment, load- deflection
N/A
‘‘Experimental investigation on flexural Behaviour of hybrid (steel-polypropylene) fibre reinforced concrete beams”.This study is an experimental research on the
N/A
The numerical load-deflection responses demonstrated that increasing the hogging-to-sagging nominal capacity ratio in continuous specimens reinforced with BFRP or hybrid
N/A
An increase of 25 % in the ultimate load was found for the hybrid fibre reinforced concrete beam at 2 % total fibre content consisting of 70 % steel fibre and 30 % basalt fibre
N/A
This study is conducted to analyze the flexural behavior of concrete beams longitudinally reinforced with steel and GFRP bars subjected to monotonic loading.. This study involves
N/A
Keywords:- fiber reinforced concrete, SFRC, flexural performance, post cracking behaviour, fresh concrete properties, dosage, shape and aspect ratio of steel
N/A
(2 more authors) (2018) Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete.. Construction and Building
N/A
In order to fulfill the goals of this research, eight full-scale masonry walls (unreinforced and reinforced with steel and GFRP rebars) were built and tested under
N/A
Heat of Hydration Thermal Performance and Flexural Capacity of Heat of Hydration Thermal Performance and Flexural Capacity of Stainless-Steel Reinforced Concrete
N/A
This paper carried out the flexural performance test of 8 FRP bars and HRB bars reinforced concrete beams (hereinafter referred to as "hybrid reinforced
N/A
The flexural strength of concrete beam reinforced with steel bars (RSB) is almost similar to that of concrete beam reinforced with steel and PET bars (RSPB) and the
N/A
and flexural toughness of concrete Reinforced with steel – polypropylene hybrid fibres”, Asian Journal Of Civil Engineering (Building And Housing), Vol. C and Nwoji,
N/A
The steel and polypropylene fibers of hybrid concrete used increase the flexural strength, impact strength and toughness properties of concrete.. It is an economical way to
N/A
Mendis, "Evaluation Of The Flexural Strength And Serviceability Of Geopolymer Concrete Beams Reinforced With Glass-Fibre-Reinforced Polymer (GFRP) Bars"
N/A
In this research, we have investigated flexural behavior in reinforced concrete beams with glass fiber-reinforced polymer (GFRP) and have analyzed the different
N/A