18 results with keyword: 'laser welding dissimilar carbon steel stainless steel l'
It is showed that transition of the laser welding mode from conduction to keyhole welding as a result of power density variation have a significant impact on the dissimilar
N/A
The evolution of temperature profiles and weld pool geometry during dissimilar welding between 2205 duplex stainless steel and A36 low carbon steel using keyhole plasma arc welding
N/A
different welding speed on hardness, corrosion resistance and microstructure of the base metal, heat affected.. zone (HAZ) and weld metal positions would help in
N/A
The influence of various welding parameters, such as beam diameter, peak power, pulse repetition rate, and pulse width on the weld beads geometry was studied by checking the width
N/A
Effect of current, welding speed, joint gap and electrode diameter on weld bead dimensions on 6 mm thick dissimilar weld between carbon steel to stainless steel, was studied
N/A
i) Laser welding is very successful process to join stainless steel and low carbon steel. The speed also has a strong effect on the response; increasing welding speed will
N/A
Dissimilar metals joints between aluminum alloy AA6061-O and stainless steel SUS304 were successfully joined by MIG welding with preheating on the stainless-steel
N/A
when the scanning speed was decreased fiom 300 to 50 d m i n. Decreasing the scanning speed was consequently initiated more heat conduction and heat convection to take
N/A
Dynamische Messsoftware für Einachssysteme Dynamic measurement software for one axis systems Sprachunterstützung: Deutsch Language support:
N/A
Nd:YAG laser welding process has successfully used for joining a dissimilar metal AISI 304L stainless steel and pure copper plates.. In this study, a statistical design
N/A
In this paper the laser welding of dissimilar materials, namely stellite and stainless steel, is investigated and optimized in terms of corrosion resistance, comparing the results
N/A
For dissimilar metal joints between stainless steel castings and medium or high carbon steels, 312- type welding consumables containing high amounts of ferrite are better to prevent
N/A
Abstract —Numerical modelling of the welding of dissimilar materials, stainless steel and mild steel, has been carried out using Abaqus together with Gas Metal
N/A
The weld nugget dimensions (weld width and penetration depth) for optimum weld condition (OP), were highest when comparing all joints. No IMCs were visible at any joints. iii)
N/A
Stainless Steel 304 was welded to C-25 carbon steel using a metal inert gas welding which also known as gas metal arc is welding with the help of filler wire of stainless steel
N/A
The results of the laser welding tensile test on the joint of different type of material (stainless steel and low carbon steel) resulted that the current of 410 A up to the current
N/A
with laser power and decreased with welding velocity, in line with an increase in heat input (Figure
N/A