Circuits include well–known active elements such as Operational Transconductance Amplifier (OTA) and Second Generation Current Conveyor (CCII), and other active

Rincon, “Low Voltage Analog Circuits Using Standard CMOS Technology,” Proceedings of the International Symposium on Low Power Design , pp. Park

The important circuits include high voltage circuits, low voltage circuits, power driving circuits, drive converter interface circuits, protection circuits, control circuits

An electromagnetic relay is a switch which is used to switch High Voltage or Current using Low power circuits.. It magnetically isolates low power circuits from high

A relay is a switch that is used to switch High Voltage or Current using Low power circuits.. The relay isolates low power circuits from high power

Installed as two-winding, isolation transformers, these units can be used to power low voltage circuits including control, lighting circuits, or other low voltage applications

Minimizing the power consumption and reducing the supply voltage become essential demands in modern portable electronic devices and battery-powered implantable and wearable

The simulation results demonstrate increase in input range for FGMOS based voltage buffer and analog inverter and maximum power dissipation of 0.5 mW, 1.9 mW and 0.429 mW for FGMOS

Different circuits are designed using dual-threshold voltage design and there power consumption values are compared with the single threshold voltage

Experimental studies on the assessment and control of near-field noise levels due to the operation of a generator were undertaken by employing antivibration mounts (made up of

An important facet of the performance of the voltage clamp circuit is to determine the response of the membrane parameters such as ionic current once a change in reference

Based on the presented analysis, a new dynamic comparator is proposed, where the circuit of a conventional double tail comparator is modified for low-power and fast operation even

Her research interests include leakage power reduction of Nano-scale CMOS circuits, low power and low voltage static and dynamic logic circuit techniques for

Dynamic logic is well suited for high speed circuit design and requires less number of transistors to implement a given logic, but the major drawback with this logic is, its

In mixed- signal systems, the analog circuits are combined with digital circuits in order to get the best performance with a low-voltage supply and low-power consumption.. This

Current-mode signal processing is quite attractive for low power supply voltage operation and high frequency application. In this paper design of current-mode circuits

A relay switch is used to switch electrical devices running on high power AC voltages using low power electronic circuits running on low voltage DC.. It is an

Logic compatible gain cell (GC)-embedded DRAM (eDRAM) arrays are considered an alternative to SRAM due to their small size, nonratioed operation, low static