18 results with keyword: 'mechanical properties sugar fibre reinforced impact polystyrene composites'
The addition of 10 to 30% by weight of short SPF has slightly decreased the tensile strength of short SPF-HIPS composites compared to neat HIPS (0% loading).. It can be seen that
N/A
In the present paper, the results report on the present studies on the thermal properties of short sugar palm fibre reinforced high impact polystyrene composites under TG analysis
N/A
variable. The effect of externally applied pressure on electrical impedance values was investigated using the silicon prototype to measure beef rib fat and muscle
N/A
RESULTS AND DISCUSSIONS 4.1 Fibre-Matrix Interfacial Shear Strength 4.2 Moisture Absorption Behavior 4.2.1 Oven-Dry Test 4.2.2 Moisture Absorption Property 4.3 SEM Results of
N/A
In this study, the tensile properties of abaca fibre reinforced high impact polystyrene (HIPS) composites, which had been produced with the parameters of fibre loading (30,40,50
N/A
The scope of research is focusing on the mechanical, physical, water absorption, and morphological properties of long sugar palm fibres reinforced VE composites at different
N/A
In conclusion, the increase in coconut fibre reinforces the polyester matrix composite and the maximum tensile strength is achieved at about 10% and 60% by weight of
N/A
Effect of carbon fibre ratio to the impact properties of hybrid kenaf/carbon fibre reinforced epoxy composites.. Natural fibre applications
N/A
A significant improvement was observed in physical, mechanical, thermal and morphological properties of treated kenaf bast fibre reinforced polyester composites.. Treated
N/A
The plasma treatment of the fibres had a positive impact on the mechanical properties of the resulting wood fibre and sisal fibre reinforced PP composites when compared to
N/A
Prepreg manufacturing process of SPF with polypropylene 3.6.3 Fabrication of laminate composites 3.6.3.1 Sugar palm fibre reinforced PP polymer composites 3.6.3.2 Glass fibre
N/A
A SPALF/ HIPS composites at vari- ous fibre sizes and fibre loadings after immersion in distilled water has increase the water absorption compare to pure HIPS (0% fibre), it can
N/A
LITERATURE REVIEW 2.1 Composite Materials 2.2 Polymeric Materials 2.2.1 Thermoset and Thermoplastics 2.2.2 High Impact Polystyrene 2.3 Natural Fibres 2.3.1 Description of Natural
N/A
Response surface methodology with Box-Behnken (BB) design of experiment was utilized to study water absorption and melt flow index (MFI) of abaca fibre reinforced high
N/A
The influence of impact energy, fibre volume fraction and fibre surface treat- ment on the post-impact flexural properties of hemp fibre reinforced composites (H-SMC) was
N/A
2.6.8 A Study on Mechanical Properties of Woven Kenaf Fibre Reinforced Polymer Composites. A study from Shazali et a l., (2013), that focuses on mechanical properties
N/A