18 results with keyword: 'stress corrosion cracking susceptibility stainless steel hydrogenated water'
Shoji, E ff ects of dissolved hydrogen and surface condition on the intergranular stress corrosion cracking initiation and short crack growth be- havior of non-sensitized 316
N/A
Effect of temperature on corrosion rate, pitting corrosion and stress corrosion cracking susceptibility of conventional, super 13 Cr OCTG steel and weldable super 13 Cr
N/A
Effect of chloride on stress corrosion cracking susceptibility of carbon steel in simulated fuel grade ethanol.. Corrosion and stress corrosion cracking of carbon steel in
N/A
Transgranular Stress Corrosion Cracking of 304L Stainless Steel Pipe Clamps in Direct Use Geothermal Water Heating.. Applications
N/A
The Slow Strain Rate Test (SSRT) technique was used to investigate the stress corrosion cracking (SCC) susceptibility of sigmatized super duplex stainless steel
N/A
Acoustic Emission Detection In 304H Stainless Steel Due To Intergranular Stress Corrosion Cracking..
N/A
Keywords: Single-crystal stainless steel; Stress corrosion cracking; Three-dimensional model; Slip band; Discontinuous cracks.. *
N/A
Figures 2.0,3.0,4.0 and 5.0 show the SCC behaviour of type 304 austenitic stainless steel in NaCl expressed in terms of percentage elongation to fracture and in terms
N/A
Electrochemical Impedance Spectroscopy is another common testing technique used to study corrosion behavior of stainless steel.. Similarly to the linear polarization
N/A
Scoping stress corrosion cracking (SCC) tests of 304 stainless steel (SS) were performed in 75°C and 250°C aerated pressurized water (APW) and 250°C deaerated pressurized water
N/A
Failure to maintain cooling water within specification would very rapidly lead to stress corrosion cracking of one of ten critical stainless steel process exchangers, failure of
N/A
Stress Corrosion Cracking Evaluation of Carbon Steel in Biodiesel and the Effect of Ultrasonic Nanocrystal Surface Modification (UNSM) on 304 Stainless Steel..
N/A
The present study focused on stress corrosion cracking (SCC) and corrosion behavior of ferritic stainless steel (grade 430) in activated methyl diethanolamine (aMDEA)
N/A
On November 30 – December 2, 2020, an online certification inspection was completed on
N/A
Studying the effect of sensitization on the threshold stress intensity and crack growth for chloride stress corrosion cracking of austenitic stainless steel using circumferential
N/A
The quantitative effect of Mo and Cu on the stress corrosion cracking and the pitting corrosion of ultra- pure ferritic stainless steel has been studied by immersion tests in
N/A
The purpose of this project is to study the effect of chloride stress corrosion cracking in austenitic stainless steel based on the sensitization treatment of
N/A