18 results with keyword: 'validation experiment mach axisymmetric shock boundary layer interaction'
• A goal of the design was to minimize the effort required to change between the rectangular and axisymmetric
N/A
The wall static pressure normalized by the nozzle exit static pressure ( P w /P noz ) is also plotted as a dotted line. At the first station it is reasonable to assume that the
N/A
The bellmouth for the axisymmetric facility serves two purposes. This design conforms to the Low- β Nozzle with Throat Taps illustrated in Figure II-III- 14 of Reference 9 with
N/A
In the verified study, the result of experiment is showed evident that the phenomenon of stress distribution in the pressure vessel. According to the process of analysis by
N/A
Interaction between the normal shock wave and the turbulent boundary layer in a supersonic nozzle becomes complex with an increase of a Mach number just before the shock wave1.
N/A
and Monson, D.J., “The Hypersonic Shock Wave- Turbulent Boundary Layer Interaction Generated by a Sharp Fin at Mach 8.2,” AIAA Paper No. and Shapey, B.L.,
N/A
The study found that trustworthiness as an ethical communication tool significantly relates to the efficiency of the Nigerian Immigration Service in Rivers State.. Trustworthiness
N/A
Figure 28: 10 Degree Angle Cone Normal Shockwave Skin Friction Coefficient The external geometry was moved so that it begins in the middle of the double angle ramp in order
N/A
The major findings of the study are as follows: the most widely used product costing method is job costing; the complexity in production poses as the highest
N/A
Experiments on shock-wave/boundary-layer interaction of an impinging shock on a flat panel at Mach numbers of 3 and 4 were conducted in the Trisonic Wind Tunnel (TMK) of the
N/A
The major findings of the study are as follows: the most widely used product costing method is job costing; the complexity in production poses as the highest
N/A
Con- figurations being investigated include a Mach 2.87 flat plate to compare experimental ve- locity profiles and boundary layer growth, a Mach 6 flat plate to compare
N/A
The high adsorptive capacity of modified starch can be attributed to the modification process which create pores and increased the surface area per gram of the
N/A
Chamberlain, Rachel P., "Articulations of Liberation and Agency in Yanagi Miwa's "Elevator Girls"." Thesis, Georgia State University,
N/A
as SBLI (shock wave boundary layer interaction) in the scientific literature. The interaction of shock waves on wall boundary layer has always been an active area of interest due to
N/A
To support the unorthodox action of spreading loss to the PRAA taken by the Board of Trustees in April 2002, the Appellee argues that the Pension Fund’s market losses from 2001 and
N/A
D , Quantitative analysis using BLI revealed no significant difference in the survival rate of grafted cells between the sub- acute and chronic TP groups up to 42 days
N/A