The activation parameter can also be included in step 1 , but then no modification of the parameters is possible afterwards (except

DLP 1129 — Create xDSL profiles (no) dis-g992-1-b (no) dis-g992-2-a (no) dis-g992-3-a (no) dis-g992-3-b (no) g992-3-l1 (no) g992-3-l2 (no) g992-3-aj (no) g992-3-am (no) g992-5-a (no) g992-5-b (no) ansi-t1.424 (no) dis-etsi-ts (no) itu-g993-1 (no) ieee-802.3ah (no) g992-5-aj (no) g992-5-am (no) g993-2-8a (no) g993-2-8b (no) g993-2-8c (no) g993-2-8d (no) g993-2-12a (no) g993-2-12b (no) g993-2-17a (no) g993-2-30a

(no) min-noise-down <Xdsl::NoiseMargin> (no) min-noise-up <Xdsl::NoiseMargin> (no) trgt-noise-down <Xdsl::NoiseMargin> (no) trgt-noise-up <Xdsl::NoiseMargin> (no) max-noise-down <Xdsl::NoiseMarginPlus> (no) max-noise-up <Xdsl::NoiseMarginPlus> (no) carrier-mask-down <Xdsl::CarrierMaskDown> (no) carrier-mask-up <Xdsl::CarrierMaskUp> (no) rf-band-list <Xdsl::RFBand>

(no) power_mgnt_mode <Xdsl::LinePowerMgtMode> (no) l0-time <Xdsl::LineTime>

(no) l2-time <Xdsl::LineTime> (no) l2-agpow-red-tx <Xdsl::L2Atpr> (no) modification <Xdsl::ModifyStatus> (no) rau-noise-down <Xdsl::NoiseMargin> (no) rau-noise-up <Xdsl::NoiseMargin> (no) rau-time-down <Xdsl::RaTime> (no) rau-time-up <Xdsl::RaTime>

(no) rad-noise-down <Xdsl::NoiseMargin> (no) rad-noise-up <Xdsl::NoiseMargin> (no) rad-time-down <Xdsl::RaTime> (no) rad-time-up <Xdsl::RaTime>

(no) l2-agpw-to-red-tx <Xdsl::LineL2Atpr>

4 Configure the artificial noise (that is, the transmitter-referred artificial noise level to be used as additional noise source at the downstream transmitter) with the following command:

configure xdsl spectrum-profile (index) artificial-noise-down (psd-point)

DLP 1129 — Create xDSL profiles

DLP 1129-4 December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02

Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA

5 If the xDSL type is ADSL or ADSL2, then the ADSL and ADSL2 specific part of an xDSL spectrum profile can be managed with the following command:

configure xdsl spectrum-profile (index) adsl-adsl2 (no) proprietary-feat

(no) propr-feat-value <Xdsl::ProprFeatValue> (no) max-agpowlev-down <Xdsl::PowerLevel> (no) max-agpowlev-up <Xdsl::PowerLevel>

(no) max-psd-down <Xdsl::Adsl2PowerSpectralDensityDown> (no) max-psd-up <Xdsl::Adsl2PowerSpectralDensityUp> (no) pbo-mode-up

(no) max-recv-power-up <Xdsl::RxPowerLevel> (no) psd-mask-up <Xdsl::Adsl2PsdMaskUp>

6 If the xDSL type is ADSL2+, then the ADSL2+ specific part of an xDSL spectrum profile can be managed with the following command:

configure xdsl spectrum-profile (index) adsl2-plus (no) proprietary-feat

(no) propr-feat-value <Xdsl::ProprFeatValue> (no) max-agpowlev-down <Xdsl::PowerLevel> (no) max-agpowlev-up <Xdsl::PowerLevel>

(no) max-psd-down <Xdsl::Adsl2PlusPowerSpectralDensityDown> (no) max-psd-up <Xdsl::Adsl2PlusPowerSpectralDensityUp> (no) pbo-mode-up

(no) max-recv-power-up <Xdsl::RxPowerLevel> (no) psd-shape-down <Xdsl::Adsl2PlusPsdShapeDown> (no) psd-mask-up <Xdsl::Adsl2PlusPsdMaskUp>

7 If the xDSL type is Reach Extended ADSL2 (READSL2), then the READSL2 specific part of an xDSL spectrum profile can be managed with the following command: configure xdsl spectrum-profile (index) re-adsl

(no) proprietary-feat

(no) propr-feat-value <Xdsl::ProprFeatValue> (no) max-agpowlev-down <Xdsl::PowerLevel> (no) max-agpowlev-up <Xdsl::PowerLevel>

(no) max-psd-down <Xdsl::ReAdsl2PowerSpectralDensityDown> (no) max-psd-up <Xdsl::ReAdsl2PowerSpectralDensityUp> (no) pbo-mode-up

(no) max-recv-power-up <Xdsl::RxPowerLevel>

8 If the xDSL type is VDSL, then the VDSL specific part of an xDSL spectrum profile can be managed with the following command:

configure xdsl spectrum-profile (index) vdsl (no) proprietary-feat

(no) propr-feat-value <Xdsl::ProprFeatValue> (no) vdsl-band-plan <Xdsl::VdslBandPlan> (no) optional-band <Xdsl::OptionalBandUsage> (no) optional-endfreq <Xdsl::OptionalBandEndFreq> (no) adsl-band <Xdsl::AdslBandUsage>

(no) max-agpowlev-down <Xdsl::VdslPowerLevel> (no) max-agpowlev-up <Xdsl::VdslPowerLevel> (no) psd-shape-down <Xdsl::VdslPsdShapeDown> (no) psd-shape-up <Xdsl::VdslPsdShapeUp> (no) pbo-mode-down

DLP 1129 — Create xDSL profiles

(no) rx-psd-shape-up <Xdsl::RxVdslPsdShapeUp> (no) ghstones-pwr-mode <Xdsl::GhsTonesTxPwr> (no) max-band <Xdsl::VdslMaxBandNum>

(no) max-freq <Xdsl::VdslMaxFrequency> (no) m-psd-level-down <Xdsl::MaxPsdDown> (no) m-psd-level-up <Xdsl::MaxPsdUp> (no) psd-pbo-par-a-up <Xdsl::ABParamType> (no) psd-pbo-par-b-up <Xdsl::ABParamType> (no) cust-psd-sc-down <Xdsl::PsdScaleBit> (no) cust-psd-ty-down <Xdsl::PsdTypeBit> (no) cust-rx-psd-sc-up <Xdsl::PsdScaleBit> (no) cust-rx-psd-ty-up <Xdsl::PsdTypeBit>

(no) opt-startfreq <Xdsl::OptionalBandStartFreq>

9 Configure the transmission power of the G.hs tones in VDSL environment with the following command:

configure xdsl spectrum-profile (index) vdsl ghstone-set-pwr-ctrl (no) a43 standard | auto | manual:<Xdsl::GhsTonesTxPwrLvl> (no) b43 standard | auto | manual:<Xdsl::GhsTonesTxPwrLvl> (no) a43c standard | auto | manual:<Xdsl::GhsTonesTxPwrLvl> (no) v43 standard | auto | manual:<Xdsl::GhsTonesTxPwrLvl>

10 If the xDSL type is VDSL2, then the VDSL2 specific part of an xDSL spectrum profile can be managed with the following command:

configure xdsl spectrum-profile (index) vdsl2 (no) proprietary-feat

(no) propr-feat-value <Xdsl::ProprFeatValue> (no) max-agpowlev-down <Xdsl::VdslPowerLevel> (no) max-agpowlev-up <Xdsl::VdslPowerLevel> (no) psd-shape-down <Xdsl::Vdsl2PsdShapeDown> cs-psd-shape-dn <Xdsl::Vdsl2CustPsdShape> cs-psd-shape-up <Xdsl::Vdsl2CustPsdShape> (no) psd-shape-up <Xdsl::Vdsl2PsdShapeUp> (no) rx-psd-shape-up <Xdsl::RxVdslPsdShapeUp> (no) psd-pbo-e-len-up <Xdsl::PsdPboElectrLength> (no) m-psd-level-down <Xdsl::MaxPsdDown>

(no) m-psd-level-up <Xdsl::MaxPsdUp> (no) psd-pbo-par-a-up <Xdsl::ABParamType> (no) psd-pbo-par-b-up <Xdsl::ABParamType> (no) v-noise-snr-down <Xdsl::SnrmMode> (no) v-noise-snr-up <Xdsl::SnrmMode>

(no) v-noise-psd-down <Xdsl::VirtualNoisePsdDownType> (no) v-noise-psd-up <Xdsl::VirtualNoisePsdUpType> (no) cust-psd-sc-down <Xdsl::PsdScaleBit>

(no) cust-psd-ty-down <Xdsl::PsdTypeBit> (no) cust-psd-sc-up <Xdsl::PsdScaleBit> (no) cust-psd-ty-up <Xdsl::PsdTypeBit> (no) cust-rx-psd-sc-up <Xdsl::PsdScaleBit> (no) cust-rx-psd-ty-up <Xdsl::PsdTypeBit>

DLP 1129 — Create xDSL profiles

DLP 1129-6 December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02

Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA

11 Activate an xDSL spectrum profile with the following command:

configure xdsl spectrum-profile (index) active

12 STOP. This procedure is complete.

Configuration example (Config#1):

configure xdsl service-profile 7 name ADSL_profile version 1 configure xdsl service-profile 7 active

configure xdsl service-profile 8 name VDSL_profile version 1 min-bitrate-down 25000 min-bitrate-up 25000 plan-bitrate-down 40000 plan-bitrate-up 27000 max-bitrate-down 262143

max-bitrate-up 262143

configure xdsl service-profile 8 active

configure xdsl service-profile 10 name XSRVC_0_0 version 1 min-l2-br-down 0

configure xdsl service-profile 10 ra-mode-up automatic min-bitrate-up 0 plan-bitrate-up 0 max-bitrate-up 0 max-delay-up 16 imp-noise-prot-up 0 no inp-wo-erasure-up configure xdsl service-profile 10 ra-mode-down automatic min-bitrate-down 0 plan-bitrate-down 0 max-bitrate-down 0 max-delay-down 16 imp-noise-prot-dn 0 no inp-wo-erasure-dn configure xdsl service-profile 10 active

configure xdsl spectrum-profile 4 name vdsl_profile version 1 configure xdsl spectrum-profile 4 dis-ansi-t1413 dis-etsi-dts dis-g992-1-a dis-g992-1-b dis-g992-2-a dis-g992-3-a dis-g992-3-b dis-etsi-ts g993-2-8a g993-2-8b g993-2-8c g993-2-8d g993-2-12a g993-2-12b g993-2-17a g993-2-30a

configure xdsl spectrum-profile 4 active

configure xdsl spectrum-profile 5 name adsl_profile version 1 configure xdsl spectrum-profile 5 active

configure xdsl spectrum-profile 22 name "approved-profile" configure xdsl spectrum-profile 22 active