The following technical specifications are listed for the various options available for the AD2000 Series devices:
Table 2 - Logic Functions
Logic Functions Subject to change as new features are added - Consult User Manual.
Arithmetic & Maths - Add, Subtract, Multiply, Divide, Cosine, Sine, Tangent, Arc Cosine, Arc Sine, Arc Tangent, Log Natural, Exponential, Log Base10, Square Root, Power, Degree To Radian, Radian To Degree
Data Manipulation - Absolute, Greater Than, Less Than, Equal To, Maximum, Minimum, Modulus, Bit Shift Left, Bit Shift Right, Rotate Left ,Rotate Right, Decrement, Increment, Move, Move Not, Convert, AND Word, OR Word, XOR Word
Boolean - Normally Open, Normally Closed, Positive Edge, Negative Edge, Any Edge, Output Coil, Not Output Coil, Set/Reset Output Coils
Timer/Counter - Counter Up, Counter Down, Counter Up Down, Timer Pulse, Timer On-Delay, Timer
Off-Delay, Timer Accumulating
Special - Change Detect, High Speed Counter for DIN1 and DIN2, High Speed Rate Calculation for DIN1 and DIN2, Datalog Variable, Moving Average, Parcel, RTC Time, RTC Date, Rate Calculation, Scale, Shaft Encoder Interface, PID (option on application).
Table 3 - Physical Dimensions
Dimensions (for AD2000 & AD2006)
Length 202mm (7.95”)
Width 178mm (7.01")
Depth 60mm (2.36")
Weight (with internal radio or modem) 950g Weight (with no internal radio or modem) 650g
Table 4 - Environmental Specifications
Environmental Specifications
Operating temperature range -10°C to +70°C Operating humidity range < 90% RH Storage temperature range -40°C to +85°C
Table 5 - Power Interface Specifications
Power Interface Specifications *24VDC option available AD2000/2
Main input voltage - range +10.5 VDC to +15.0 VDC Main input voltage - nominal 12.0 VDC Peak input current (maximum) 200mA @ 12.0 VDC
Table 6 - Supported Protocols
Protocols
Miri2000 (&Oval2000) Modbus Allen Bradley DF1 Half Duplex Slave OPC TCP/IP Protocol stack, UDP, Telnet configuration Protocol development available on requested
Chapter 2 - Introduction
Table 7 - AD2000 Communications Port Specifications
Port Specifications AD2000
Internal module - number 1 x FFSK modem or RS232 1 1
Either FFSK or RS232 not both. With any internal communications module fitted, e.g. GSM/GPRS module, this port is not available for external device connection. FFSK modem data rates selectable 1200/2400/4800 bps. RS232 date rates 300-38.4kbps.
Serial Ports - number 1 x RS232 2 2
All to 38.4kbps, RS232 via RJ45 connectors
PCMCIA/PC Card - number 1 x type II 3 3
Supports Ethernet (LAN & ADSL connectivity). RS232 and CF FLASH memory card capability. Specific cards only to be used with installed drivers. Not all PCMCIA/PC Cards are compatible. Contact AD2000 dealer for compatible products.
Table 8 - AD2006 Communications Port Specifications
Port Specifications AD2006
Internal module - number 1 x FFSK modem or RS232 1 1
Either FFSK or RS232 not both. With any internal communications module fitted, e.g. GSM/GPRS module, this port is not available for external device connection. FFSK modem data rates selectable 1200/2400/4800 bps. RS232 date rates 300 to 115kbps.
Serial Ports - number 2 x RS232 + 1 x RS485 2 2
All to 115kbps, RS232 via RJ45 connectors, RS485 via screw terminals
Ethernet Option 1
Interface Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Connector RJ45
Layer 3 Protocols TCP, UDP, IP, ARP, ICMP, SSH, SSL, XML, HTTP, PPP, PAP, CHAP, DNS, SMTP, RSS, DHCP, BOOTP, AutoIP, SNMP, FTP, TFTP, Telnet, CGI
USB 2.00 Programming port 1
Table 9 - I/O Specifications
Input/Output Specifications AD2000 (N.B. Optical isolation to
3kV) AD2006 (N.B. Optical isolation to 3kV)
Digital Inputs - number 16 16 Digital Inputs - voltage 10-50VAC/DC or
70-110VAC/DC 10-50VAC/DC or 70- 110VAC/DC Digital Inputs - pulse
(All digital inputs count to 5Hz) 1 High Speed to 5kHz (to 50VDC) 2 High Speed to 5kHz (to 50VDC) Digital Outputs - number 4 (2 form A and 2 form C) 4 (2 form A and 2 form C) Digital Outputs - type Relay or
Transistors 100mA sinking 35VMax
Relay or Transistors 100mA sinking 35VMax Analogue Inputs - number 8 (if 4 x Analogue O/Ps used 4 I/Ps
available)
8 (if 4 x Analogue O/Ps used 4 I/Ps available)
Analogue Inputs - type 4-20mA/1-5V or 0-20mA or 0-10V
4-20mA/1-5V or 0-20mA or 0-10V Analogue Inputs - format 12 bits
Accuracy 0.1% Linearity 0.1%
12 bits Accuracy 0.1% Linearity 0.1% Analogue Outputs - number 4 x 4-20mA (Optional) 4 x 4-20mA (Plug-In Module)
Table 10 - Memory Specifications
Memory Specifications AD2000 AD2006
RAM 256kbyte 512kbyte
Program storage FLASH 512kbyte 512kbyte Datalog FLASH (on-board) 512kbyte 1 1Mbyte 1 1
As an example 4 x 12bit resolution analogue channels are time stamped data-logged every 15 minutes to give approx 136 days of data logging before first data is over-written. (1Mbytes=1024*1024=1048576bytes, 10 bytes/logged channel)
Chapter 2 - Introduction
© 2007 Miri Technologies All rights reserved. V3.00 2-28
Table 11 - AD2000 Series Temperature Specifications
AD2000 Series Temperature Specifications
AD2000R (Specified without radio) -30 to +70 Celcius
AD2000E -30 to +70 Celcius
AD2000B -30 to +70 Celcius
450SR Series Radio Standard
Version -10 to +60 Celcius
450SR Series Radio 1 Watt only -10 to +70 Celcius 450M Series Radio -30 to +60 Celcius 450E Series Radio -30 to +60 Celcius 150SR Series Radio -30 to +60 Celcius 900SS Radio Module -30 to +70 Celcius 24SS Radio Module -30 to +70 Celcius M16-LN Input Module -30 to +70 Celcius M16-HN Input Module -30 to +70 Celcius M16-TR Relay Module -30 to +70 Celcius M8-AD Analogue Input Module -30 to +70 Celcius
Table 12 - AD200xS Spread Spectrum Wireless Module Specifications
Specifications
Frequency Option1
(where approved) 902-928MHz
Frequency Option2
(Global ISM Band) 2.4000-2.4385GHz Spreading Spectrum Type Frequency Hop, direct FM Network Topology Point To Point, Point To Multi-Point, Store & Forward Channel Capacity 7 hop sequences share 25 frequencies Certifications ETSI (2.4GHz model only), FCC Part 15.247 (Both)
Performance
Indoor/Urban Range (900MHz) 457m Indoor/Urban Range (2.4GHz) 183m Outdoor LOS Range (900MHz) 11km (dipole)
32km (high gain antenna) Outdoor LOS Range (2.4GHz) 5km (dipole) 16km (high gain antenna) Serial Data throughput 9600/19.2kBPS
RF Baud rate 10,000/20,000BPS
Transmit Output Power (900MHz) 140mW (21.5dBm) Transmit Output Power (2.4GHz) 50mW (17dBm) Receiver Sensitivity (900MHz) -110dBm@9600BPS [email protected] Receiver Sensitivity (2.4GHz) -105dBm@9600BPS [email protected]
Environmental Specifications
Operating temperature range 0°C to +70°C Operating humidity range < 90% RH Storage temperature range -40°C to +85°C
General
Chapter 2 - Introduction
Table 13 - AD200xR Narrow Band VHF Radio Module Specifications
AD200xR Narrow Band VHF Internal Radio Module
Type 02
Frequency Range 132-174KHz
Frequency Control Synthesised
Emission Designator 12.5kHz –11KOF3E 25kHz –16KOF3E FCC Acceptance Type NP42422430-001 IC Acceptance Type 2984195377A
Transmitter
Tx Power 2W or 5W
(Please specify)
RF Output Impedance 50ohm
Duty Cycle 50%
Attack Time 7millisecs
Frequency Stability 2ppm
FM Hum and Noise -40dB at 12.5kHz -45dB at 25kHz Modulation Distortion Less than 3%
Current Drain 1.2A@2W
Receiver
Sensitivity -116dB for 12dB SINAD
Frequency Stability 2.5ppm
Attack Time 7millisecs
Carrier Detect Time 30millisecs
Selectivity -60dB at 12.5kHz
-70dB at 25kHz
Inter-modulation -70dB
Current Drain 90mA
Conducted Spurious -57dBm
Audio Distortion Less than 3%
General
Chapter 2 - Introduction
© 2007 Miri Technologies All rights reserved. V3.00 2-30
Table 14 - AD200xR Narrow Band UHF Radio Module Specifications
AD200xR Narrow Band UHF Internal Radio Module
Frequency Range 370-520MHz
Sub-Frequency band options
10 (Tx) 848 to 858MHz (Rx) 920 to 934MHz 11 (Tx) 920 to 934MHz (Rx) 848 to 858MHz 12 855 to 860MHz (Tx & Rx) 14 (Tx) 925 to 943MHz (Rx) 906 to 924MHz 15 (Tx) 904 to 922MHz (Rx) 925 to 943MHz 16 924 to 944MHz (Tx & Rx) 50 403 to 417MHz (Tx & Rx) 51 450 to 465MHz (Tx & Rx) 52 465 to 480MHz (Tx & Rx) 53 480 to 494MHz (Tx & Rx) 54 505 to 518MHz (Tx & Rx) 55 435 to 450MHz (Tx & Rx) 56 418 to 435MHz (Tx & Rx) 57 428 to 443MHz (Tx & Rx) Frequency Stability +/-1kHz(-10 to 60oC) Aging <=1ppm/annum Transmitter Tx Power 100mW to 5W Modulation Direct FM DC to 25MHz Tx/Rx Turn-around time <30msec
Timeout Timer 1-60secs
Tx Spurious <=65dBc
Receiver
Sensitivity -118dB for 12dB SINAD
Blocking >75dB (EIA)
Inter-modulation <=70dB (EIA) Spurious Response <=70dB (EIA) Selectivity and De-sense Better than 70dB (EIA) AFC Tracking +/- 3kHz Tracking@-90dBm/attack time<10ms
Mute Fully open to –60dB
General
Transmit Current Drain 650mA @ 13.8V 1600mA @ 13.8V
Receive Current Drain 70mA
RSSI Signal/Temperature/Tx Power Internal Diagnostics
RF Connector type SMA
Table 15 - AD200xG GSM/GPRS Modem Module Specifications
Data Service Specifications
Dual Band 900/1800MHz Phase 2 + Specifications SMS Class 10 Coding: CS1 to CS4 SMG31bis compliant Internal TCP/IP Stack
Conformity
Safety EN 60950:2000 Issue 2000 EN 50360:2001 Issue 2001 Electromagnetic Compatibility EN 301 489-1 Issue 1.2.1 EN 301 489-7 Radio Spectrum Efficiency EN 301 419-1 Issue 4.1.1 EN 301 511 Issue 7.0.1 Approvals - GSM EC-R&TTE Reg. No. H1M2030490112-C
Approvals - CE CE0681
General