Charpy V-notch impact fracture tough ness test 4pp
AS/NZS 4167.2:1994 Protocol specification
(ISO/IEC 10166-2:1991) 11pp
Specifies the abstract syntax of the document filing and retrieval (DFR) access protocol, specifies how the DFR access protocol supports the DFR abstract ser- vice, specifies the mapping of the DFR access proto- col onto the services used and specifies the require- ments for conformance with DFR access protocol. This Standard is identical with, and has been repro- duced from, ISO/IEC 10166-2:1991. (IT-001)
AS 4169–2004
Electroplated coatings–Tin and tin alloys (ISO 2093:1986) 9pp
Specifies requirements for electroplated coatings of nomi- nally pure in on fabricated metal articles including tin-
AS/NZS 4170.1:1994
coatings on electron components. Adopted with national modifications and reproduced from ISO 2093:1986.
(MT-009)
AS/NZS 4170
Information technology–International stan- dardized profiles TB, TC, TD and TE– Connection-mode transport service over con- nection-mode network service
AS/NZS 4170.1:1994
Subnetwork-type independent require- ments for group TB
(ISO/IEC ISP 10609-1:1992) 12pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the subnetwork-type independent require- ments for group TB (transport protocol classes 0, 2 and 4). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-1:1992.
(IT-001)
AS/NZS 4170.2:1994
Subnetwork-type independent require- ments for group TC
(ISO/IEC ISP 10609-2:1992) 8pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the subnetwork-type independent require- ments for group TC (transport protocol classes 0 and 2). This Standard is identical with, and has been re- produced from, ISO/IEC ISP 10609-2:1992. (IT-001)
AS/NZS 4170.3:1994
Subnetwork-type independent require- ments for group TD
(ISO/IEC ISP 10609-3:1992) 7pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the subnetwork-type independent require- ments for group TD (transport protocol class 0). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-3:1992. (IT-001)
AS/NZS 4170.4:1994
Subnetwork-type independent require- ments for group TE
(ISO/IEC ISP 10609-4:1992) 7pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the subnetwork-type independent require- ments for group TE (transport protocol class 2). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-4:1992. (IT-001)
AS/NZS 4170.5:1994
Definition of profiles TB1111/TB1121 (ISO/IEC ISP 10609-5:1992) 3pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the definition of profiles TB1111/TB1121. These profiles are in the TB group (transport classes 0, 2 and 4). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-5:1992.
(IT-001)
AS/NZS 4170.6:1994
Definition of profiles TC1111/TC1121 (ISO/IEC ISP 10609-6:1992) 3pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the definition of profiles TC1111/TC1121. These profiles are in the TC group (transport classes 0 and 2). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-6:1992.
(IT-001)
AS/NZS 4170.7:1994
Definition of profiles TD1111/TD1121 (ISO/IEC ISP 10609-7:1992) 3pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the definition of profiles TD1111/TD1121. These profiles are in the TD group (transport class 0). This Standard is identical with, and has been repro- duced from, ISO/IEC ISP 10609-7:1992. (IT-001)
AS/NZS 4170.8:1994
Definition of profiles TE1111/TE1121 (ISO/IEC ISP 10609-8:1992) 3pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the definition of profiles TE1111/TE1121. These profiles are in the TE group (transport class 2). This Standard is identical with, and has been repro- duced from, ISO/IEC ISP 10609-8:1992. (IT-001)
AS/NZS 4170.9:1994
Subnetwork-type dependent require- ments for the network layer, data link layer and physical layer concerning per- manent access to a packet switched data network using virtual calls
(ISO/IEC ISP 10609-9:1992) 26pp
Specifies a combination of OSI Standards, which col- lectively provide the connection-mode transport ser- vice using the connection-mode network service, and specifies the requirements for the network layer, data link layer and physical layer that apply to configura- tions involving permanent access to packet switched data network using virtual calls. This Standard is iden- tical with, and has been reproduced from, ISO/IEC ISP 10609-9:1992. (IT-001)
AS 4171–1994
Rolling bearings–Static load ratings
(ISO 76:1987) 5pp
Specifies methods of calculating the basic static load rating and the static equivalent load for rolling bearings, manufac- tured from good quality hardened steel and basically of conventional design as regards the shape of rolling contact surfaces. This Standard is identical with and reproduced from ISO 76:1987. (ME-037)
AS 4172–1994
Rolling bearings–Vocabulary
(ISO 5593:1984) 63pp
Defines terms relevant to rolling bearings and their tech- nology. It is identical with and reproduced from ISO 5593:1984. (ME-037)
AS/NZS 4173:2004
Guide to the safe use of lasers in health care
93pp
Provides guidance for the safe use of lasers and laser sys- tems in diagnostic, cosmetic, therapeutic, medical and den- tal procedures in the treatment of humans. (HE-003)
AS 4174–1994
Synthetic shadecloth 9pp
Amendment 1 5 May 1996
Specifies minimum strength requirements for shadecloth and a method for determining the cover factor of a shade- cloth, giving colour coded designations for the various cover factor ranges. Provides methods of measuring and re- porting the transmission of radiation of a shadecloth, in- cluding UV-visible radiation and solar radiation. (TX-008)
AS 4175–1994
Wool–Glossary of terms relating to the testing of raw wool 14pp
Sets out definitions for terms relating to the testing of raw wool. The definitions have been drawn from existing Stan- dards and modifications or additions made to ensure consis- tency and to address future needs. (TX-012)
AS 4176
Multilayer pipes for pressure applications AS 4176.1–2010
Multilayer piping systems for hot and cold water plumbing applications– General (ISO 21003-1:2008, MOD) 11pp
Adopts ISO 21993-1:2008 with national modifications to specify the general characteristics of pipes and joints made of multilayer construction intended to be used for hot and cold water plumbing installations.
(PL-006)
AS 4176.2–2010
Multilayer piping systems for hot and cold water plumbing applications–Pipes (ISO 21003-2:2008, MOD) 20pp
Adopts ISO 21003-2:2008 with national modifications to specify the characteristics of pipes and joints made of multilayer construction intended to be used for hot and cold water plumbing installations. (PL-006)
AS 4176.3–2010
Multilayer piping systems for hot and cold water plumbing applications–Fittings (ISO 21003-3:2008, MOD) 11pp
Adopts ISO 21003-3:2008 with national modifications to specify the characteristics of pipes and joints made of multilayer construction intended to be used for hot and cold water plumbing applications. (PL-006)
AS 4176.5–2010
Multilayer piping systems for hot and cold water plumbing applications–Fitness for purpose of the system (ISO 21003- 5:2008, MOD) 11pp
Adopts ISO 21003-5:2008 with national modifications to specify the general characteristics of pipes and joints made of multilayer construction intended to be used for hot and cold water plumbing applications.
(PL-006)
AS 4176.7–2010
Multilayer piping systems for hot and cold water plumbing applications– Assessment of conformity (ISO/TS 21003- 7:2008, MOD) 20pp
Adopts ISO/TS 21003-7:2008 with national modifica- tions to specify requirements and provide guidance for quality management and the assessment of conformity of pipes and joints made of multilayer construction in- tended to be used for hot and cold water plumbing ap- plications. (PL-006)
AS 4176.8–2010
Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa)–Specifications for systems
(ISO 17484-1:2006, MOD) 42pp
Adopts ISO 17484-1:2006 to specify general require- ments and performance requirements for pipes and joints made of multilayer construction intended to be used for consumer gas installations with a maximum operating pressure up to and including 5 bar (500
kPa). (PL-006)
AS 4177
Caravan and light trailer towing components AS 4177.1–2004
Towbars and towing brackets 11pp
Amendment 1 26 April 2006 Amendment 2 13 November 2006
Specifies the requirements for towbars and towing brackets for use with 50mm towballs, intended for trailers and caravans up to 3.5t aggregate trailer mass, for use on public roads. (ME-052)
AS 4177.2–2004
50 mm towballs 9pp
Specifies the requirements for towballs for towing ve- hicles of up to 5t towing vehicle mass, intended for towing trailers and caravans of up to 3.5t aggregate trailer mass for use on public roads. (ME-052)
AS 4177.3–2004
Coupling body for ball couplings 9pp
Specifies the classification, design, interchangeability dimensions with tolerances, finish and marking re- quirements for coupling bodies for 50mm towballs, in- tended for trailers and caravans up to 3.5t aggregate trailer mass, for use on public roads. (ME-052)
AS 4177.4–2004
Safety chains up to 3500 kg capacity 6pp
Amendment 1 26 April 2006
Specifies the designation and design requirements for safety chains for use with trailers and caravans of up to 3.5t aggregate trailer mass, for use on public roads.
(ME-052)
AS 4177.5–2004
Electrical connectors 13pp
Specifies the design, construction and performance requirements of electrical connectors, for making de- tachable electrical connections between motor vehi- cles and trailers. (ME-052)
AS 4178–1994
Electromagnetic door holders 5pp
Specifies design, performance and testing of electromag- netic door holders intended for general use. (CS-082)
AS/NZS 4179:2014
Single-use sterile rubber surgical gloves– Specification (ISO 10282:2014, MOD) 17pp
Adopts ISO 10282:2014 to specify requirements for pack- aged sterile rubber gloves intended for use in surgical pro- cedures to protect the patient and the user from cross- contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to exami- nation or procedure gloves. (HE-013)
AS 4180
Measurement of drift loss from cooling tow- ers
AS 4180.1–2008
Chloride balance method 12pp
Sets out the requirements for measuring the drift of circulating water into the atmosphere by a chloride ion mass balance on the water circuit, under laboratory conditions. (ME-062)
AS 4180.2–2008
Lost chloride method 11pp
Sets out the requirements for measuring the drift of circulating water into the atmosphere by observing the mass of chloride ions missing from the water circuit under controlled conditions. (ME-062)
AS 4181–2013
Repair and off-take clamps for water industry purposes 26pp
Specifies requirements for the design, materials and in- service performance of Type R and Type F mechanical clamps for water industry purposes. (WS-016)
AS 4181–1999
Stainless steel clamps for waterworks pur- poses 15pp
Available Superseded
Specifies the requirements for stainless steel clamps for wa- terworks purposes. (WS-016)
AS 4182–1994
Automotive repairs–Code of practice for re- conditioning reciprocating spark ignition en- gines 10pp
Specifies a code of practice for reconditioning or remanu- facturing spark ignition, automotive and industrial engines. (CS-078)
AS 4183–2007
Value Management 22pp
Defines terms, establishes the essential elements of Value Management and clarifies roles and responsibilities. It pro- vides guidelines for the application of Value Management to products, processes, services, organizations and systems.
(OB-006)
AS/NZS 4184
Evaluation and routine testing in medical im- aging departments
AS/NZS 4184.1:1994